Table of Contents
Advertisement
The functions of the parallel interface pins are given in the Appendix. Your
Star LaserPrinter 8111 is pm-set at the factory to use a parallel connector to
the computer. You may change the settings from the front panel as
explained in the chapter "Quick Start with the Star LaserPrinter 8111: A
Tutorial."
Serial -
M-232
The serial connector, to the left of the parallel connector, can be used for a
standard RS-232 configuration. It is a standard 25 pin DB connector. To
attach a serial cable to the printer, match the wedge shape of the cable end
to that of the printer's connector and insert firmly. Then use a screwdriver
to secu,re it v&h the two screws on the cable end.
I
I
26
-
-
Advertisement
Table of Contents
