Table of Contents
Advertisement
!!
g.
i'
.
1..
-
L
-
I
-
-
..,-
If your applications program requires a DTR handshake ("hardware" rather
than XON/XOFP "software"), set it from the
SERIAL
menu by
l
Pressing [ENTER] then [NEXT] until you see
PROTOCOL
l
Pressing [ENTER] displays
XON/XOFF
l
Pressing [NEXT] displays
DTR.
Press [ENTER] to execute.
The next step is to activate your choice to the printer.
l
Press [EXIT] 3 times to display
INTERFACE
l
Press [NEXT] 2 times to display
SET POWER-UP
l
Press [ENTER] to store the current settings into NV RAM. Turn
power off, then on to activate.
l
Press [ON LINE], which allows the Star LaserPrinter 8111 to begin
printing through the serial interface.
Activating the Parallel Interface
To return to a parallel interface, do this:
l
,, Take the printer off line by pressing the [ON LINE] button until the
button's light is off
l
Thenpress [PROGRAMI.
. Press [NEXT] until the screen displays
INTERFACE
l
Press [ENTER], which displays
SERIAL
l
Press [NEXT] which gives
PARALLEL IBM
53
Advertisement
Table of Contents
