Unit Dimensional Drawing - Carrier DesertMaster 50TJM Operation And Maintenance

UNIT DIMENSIONAL DRAWING: 50TJM - 28 and 50TJM - 34 (Fig - 2)
SHIPPING DIMENSIONS (mm)
UNIT LENGTH WIDTH
50TJM - 28
3200 2485
50TJM - 34
NOTES:
1. Dimensions are in millimeters.
2. Center of Gravity.
3. Direction of Airflow
4. Minimum clearance:
REAR: 2134mm for coil removal. This dimension can be reduced to 1219mm if conditions permit coil removal from the top.
TOP: 1829mm to assure proper condenser fan operation.
SIDE: 1219mm for Compressor, Filter and Control boxes access.
- Local codes or jurisdiction may prevail.
5. With the exception of clearance for the condenser coil and the damper / power exhaust as stated in Note no. 6, a removal fence or barricade requires no clearance.
6. Dimensions are from outside of corner post. Allow 8mm on each side for top cover drip edge.
7. Weights are Given for aluminim evaporator and condenser coil plate fins
CORNER WEIGHT (Kg)
DEPTH A B C
248 226 310
1400
254 231 317
Page 7
CENTER OF GRAVITY (mm)
D TOTAL K
340 1125
1350
348 1150
L M
1160 450