Maintenance Operations; Protecting The Environment - Marini Quarry Votager Operating And Maintenance Manual

The operator must only perform the checks and maintenance operations described in this
manual. These operations must be done respecting the safety regulations as described in this
manual.
Do not climb on the machine; use a suitable ladder for the parts to be serviced that cannot be
reached from the ground.
This section provides complete information regarding the service procedures needed to keep the
machine running at maximum efficiency. It also contains information for making adjustments
needed to fine tune the machine. For best results, regular maintenance on the machine should be
performed. Also keep in mind that it is the owner's responsibility to keep the machine running
safely and efficiently.
Use only high quality lubricants. It is recommended that the maintenance be performed at the end
of the working day so that the oils are warm and can therefore be drained easier.
Before starting any maintenance operation, shut off the engine, remove the start key from the
operator panel and place wedges against the wheels.
Clean the grease nipples before lubricating with a grease gun.
Clear the surrounding area before removing the filler and drainage plugs.
Use a suitable container for the recovery of used oil and gas.
PROTECTING THE ENVIRONMENT: It is illegal to pollute drainage systems, flowing water
and the ground. Use authorized dumping stations, including locations specifically set aside by the
city or workshops that are equipped with equipment for the recovery of used oil. If unsure, contact
your municipality for clarifications.
072010

MAINTENANCE OPERATIONS

CAUTION: The maintenance and repair operations
must be done in authorized workshops and by
qualified personnel.
51