Stabilizer - Marini Quarry Votager Operating And Maintenance Manual

QUARRY VOYAGER is equipped with two stabilizers , on request ,
two extra stabilisers can be installed in the already available
connecting points.
Unscrew the bolts on pin A to remove the stabilizer.
Screw them on the pin again once changed the stabilizers position.
WARNING : the machine has to be stabilized before
starting drilling to increase its stability.
Move the column only after having stabilized the machine.
The machine has been designed to be used, in safety
condition, on a maximum slope of 10 % (~6°).
To stabilize the machine, move the stabilzers in working position:
1 – Remove the pin A (fig 51)
2 – Rotate the stabilizers (fig. 51)
A
B
Figura 52
4 – Stabilize the machine by the stabilizers
handle (fig. 53).
Once finished the drilling operation, before
moving it to another drilling point , put the
stabilizers at the travelling position.
WARNING : Do not move the machine with the stabilzers in working position.
072010
STABILIZERS
3 – Insert again the pin to stop the stabilzers
in the new position (fig. 52) , remove the
pin B and rotate the stabilizers in vertical
position.
Insert again the pin B to stop the stabilizers
in vertical position.
41
A A
Figure 50
Stabilizers in
travelling position
A
Figura 51
Figura 53