Technical Characteristics - Marini Quarry Votager Operating And Maintenance Manual

TECHNICAL CHARACTERISTICS

SLIDE CID 80
High strength continuous link chain
Standard stroke :
(other strokes available upon request)
Thrust force :
Lifting force:
Slide feed cylinder : stroke 600 mm
Weight slide with stroke
of 1600 mm:
HYDRAULIC POWER UNIT
12 HP electric motor, 400V AC, 50 Hz (ONLY VERSION WITH ELECTRIC MOTOR)
23 HP internal-combustion engine (ONLY VERSION WITH GASOLINE ENGINE)
Hydraulic fluid: MOBIL DTE 25 or equivalent
Calibration of the pressure relief valves (inside the power unit)
•
discharge for rotary head
•
discharge for feed cylinder and other services : 200 bar
CONTROL PANEL
Rotation distributor calibration
Advancement distributor calibration
Line lubricator with 7 liter reservoir
Oil for the line lubricator
Weight
Rock drill MA90 drilling and flushing air pressure
DTH drilling and flushing air pressure
NOTE: All the data on this sheet is approximate and non binding, in that Marini
Quarries reserves the right to make any modifications or changes without
forewarning.
072010
1600 mm
from 0 - 900 kg
1000 kg
100 kg
11
Figure 7
2300
: 200 bar
: 140 bar
: 140 bar
: MOBIL ALMO 525 or equivalent
: 40 kg
: 6 bar (max)
: 10 bar (max)
2100
1100