Function Settings; Changing Date And Time - Kanomax ANEMOMASTER Series Operation Manual

7. Function Settings

7. Function Settings

7.1 Changing Date and Time

DISPLAY
Set-up Phase
Press
m/s
the Normal Measurement screen (Measurement Mode).
The set-up phase number that indicates what you are adjusting appears
at the bottom left, and the last 2 digits of the year flash. Use
keys to adjust the year. Then press
* The set-up phase numbers correspond to the followings:
1 ............ Year
2 ............ Month
3 ............ Date
Next, the numeric value indicating month flashes.
Use
key.
Next, the numeric value indicating date flashes.
Use
key.
Next, the numeric value indicating hour flashes.
Use
key.
Next, the numeric value indicating minute flashes.
Use
key. After pressing
will be displayed and the setting is complete.
* If the
return to the Normal Measurement screen without saving the setting.
PROCEDURE
and keys simultaneously for 2 seconds or longer on
4 ............ Hour
5 ............ Minute
and keys to adjust the month. Then press
and keys to adjust the date. Then press
and keys to adjust the hour. Then press
and keys to adjust the minute, and press
key, the Normal Measurement screen
key is pressed before saving the setting, you will
28
and
key.