Hardware Specifications - Infortrend EonStor GSa 3000 Series Hardware Manual

Hardware specifications

Specification summary
Form factor
Controller
Cache memory
Host ports
Cache backup technique
Drive connectivity
Maximum number of drives
Disk support
Supported protocols
viii
2U 25-bay EonStor GSa 3025
Dual redundant controllers
- 16 GB DDR4 (2 x 8 GB)
- 32 GB DDR4 (2 x 16 GB)
- 64 GB DDR4 (4 x 16 GB)
- 128 GB DDR4 (4 x 32 GB)
- 256 GB DDR4 (8 x 32 GB)
Note: The installed default memory varies by model, region,
and other factors. Contact your local sales representative for
details.
Onboard Gb/s ports:
- 4 x 1 Gb/s iSCSI ports (2 per controller)
- 4 x 10 Gb/s iSCSI ports (2 per controller)
More host options:
- 8 x 10 Gb/s iSCSI/RJ-45 ports (4 per controller)
- 8 x 12 Gb/s SAS ports (4 per controller)
- 8 x 16 Gb/s Fibre Channel ports (4 per controller)*
- 8 x 40 Gb/s iSCSI/QSFP ports (4 per controller)
- 8 x 56 Gb/s InfiniBand ports (4 per controller) - for
Linux only, block level only
- 16 x 1 Gb/s iSCSI ports (8 per controller)
- 16 x 8 Gb/s Fibre Channel ports (8 per controller)*
- 16 x 10 Gb/s FCoE ports (8 per controller)
- 8 or 16 x 10Gb/s iSCSI ports/ SFP+ (4 or 8 per
controller)
* Supports point-to-point and switch mode
Super capacitor + Flash module
12 Gb/s SAS connectivity
System: 25
Expansion: 400 and 775 (with expansion board)
2.5-inch SATA SSD
2.5-inch SAS SSD
NOTE: Refer to the Compatibility Matrix for the latest
compatibility details.
File level protocol
- CIFS/SMB
- AFP
- NFS
- FTP
- FXP
-WebDAV
Block level protocol
- FC
- FCoE
- iSCSI
- InfiniBand
- SAS
(See next page)