Clip-In; Agu2.500; Outputs; Electrical Connections - Siemens LMU54 Series Basic Documentation

Boiler management unit (bmu)
Table of Contents

Advertisement

Outputs

Electrical connections

Note

Input

Outputs
Electrical connections
Note
Input
Note
Siemens Building Technologies
HVAC Products

10.2 Clip-in

10.2.1 AGU2.500...

Mixing circuit pump and mixing valve
- Voltage
- Current
When assigning loads to the outputs, the total current draw of the LMU... system must
be taken into consideration!
Flow sensor NTC 10 kΩ

10.2.2 AGU2.51x

Up to 3 outputs (K1...K3)
When using 2 clip-in modules with the LMU..., only 2 outputs possible
- Voltage
- Current
When assigning loads to outputs K1...K3, the total current draw of the LMU... system
must be taken into consideration!
Version
Input
AGU2.511A109
0...10 V
AGU2.513A109
(0)4...20 mA
AGU2.514A109
NTC 10 kΩ
AGU2.515A109
1) Contact rating: Nom. DC 34 V / 5 mA
The inputs may only be used with safety extra low-voltage (SELV) and may not be
connected to protective earth (PE)!
Basic Documentation LMU54... / LMU64...
10 Technical data
Remarks
Note polarity
Note polarity
Like boiler sensor
1)
AC 230 V +10 % -15 %
5 mA ... 1 A, cos ϕ > 0.8
like boiler sensor
AC 230 V +10 % -15 %
5 mA ... 1 A, cos ϕ > 0.8
127/171
CC1P7494en
07.11.2002

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lmu64 series

Table of Contents