Aaeon PCM-5890 Manual page 70

These drivers are designed to work with Microsoft Windows Version
3.1. You may install these drivers either through Windows or in DOS.
1. Install Windows as you normally would for a VGA display. Run
Windows to make sure that it is working correctly.
2. Place the Display Driver Diskette #1 in drive A. In Windows
Program Manager, choose File from the Options Menu. Then
from the pull-down menu, choose Run. At the Command Line
prompt, type A:\WINSETUP. Press the <ENTER> key or click
OK to begin the installation.
At this point the setup program locates the directory where Windows
is installed. For proper operation, the drivers must be installed
in the Windows subdirectory.
3. Press <ENTER> to complete the installation. Once completed,
you can find the icon ChipsCPL under the Control Panel. The
ChipsCPL icon allows you to select and load the installed drivers.
Another method of installing these drivers is through the File
Manager. Click on Drive A:, and then double-click on
WINSETUP.EXE to begin installation.
To change display drivers from Windows, select the Windows Setup
icon from the Main window. You will be shown the current setup
configuration. Select Change System Settings from the Options
menu. Click on the arrow at the end of the Display line. You will be
shown a list of display drivers. Click on the driver you want to select
it. Then click on the OK button. Follow the directions to complete
the setup.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Ô Ô Ô Ô Ô