Aaeon PCM-5890 Manual page 39

The PCM-5890's on-board VGA interface supports a wide range
of popular LCD, EL, gas plasma flat panel displays and traditional
analog CRT monitors. The interface can drive CRT displays with
resolutions up to 1024 x 768 in 256 colors. It is also capable of
driving color panel displays with resolutions of 640 x 480 in 64K
colors. The VGA interface is configured completely via the
software utility, so you don't have to set any jumpers. Configure
the VGA display as follows:
1. Apply power to the PCM-5890 with a color TFT display
NOTE:
2. At the prompt, type AWDFLASH.EXE and press <Enter>. The
30 PCM-5890 User's Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
attached. This is the default setting for the PCM-5890. Ensure
that the AWDFLASH.EXE and *.BIN files are located in the
working drive.
Ensure that you do not run AWDFLASH.EXE
while your system is operating in EMM386
mode.
VGA configuration program will then display the following:
VGA Setup screen