Aaeon PCM-5890 Manual page 37

The PCM-5890 system BIOS and custom drivers are located in a
128 Kbyte, 32-pin (JEDEC spec.) Flash ROM device, designated
U12. A single Flash chip holds the system BIOS, VGA BIOS, and
network Boot ROM image. The display can be configured via
software. This method minimizes the number of chips and eases
configuration. You can change the display BIOS simply by
reprogramming the Flash chip.
The PCM-5890 is supplied with a software utility disk. This disk
contains the necessary file for setting up the VGA display and
Ethernet controller. Directories and files on the disk are as
follows:
RSET8029.EXE
This program enables you to view the current Ethernet configura-
tion, reconfigure the Ethernet interface (medium type, etc.), and
execute useful diagnostic functions.
AWDFLASH.EXE
This program allows you to write the VGA display driver files to
the BIOS Flash ROM. The VGA files all come ready formatted
for the PCM-5890 with .BIN extensions. See README.DOC.
These files support various CRT and flat panel displays. They are
custom written and can be made available upon request.
28 PCM-5890 User's Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
README.DOC
NET (Dir)
DISPLAY (Dir)
RSET8029.EXE
AWDFLASH.EXE
5890_SYS.BIN
5890_CRT.BIN
5890_TFT.BIN
5890_STN.BIN
5890_STN.512
5890_MON.BIN
5890_EL.BIN
CBROM.EXE