1. Manuals
  2. Brands
  3. Aaeon Manuals
  4. Motherboard
  5. PCM-5893L
  6. User manual

Aaeon PCM-5893L User Manual

All-in-one amd geode gx 466/500/533 processor compact board with lcd, ethernet, audio & 4 coms
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
C o m p a c t B o a r d
P C M - 5 8 9 3 / 5 8 9 3 L
PCM-5893/5893L
All-in-one AMD Geode GX
466/500/533 Processor
Compact Board
With LCD, Ethernet,
Audio & 4 COMs
PCM-5893/5893L Rev. A Manual 1st Ed.
Jun. 2006

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PCM-5893L and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Aaeon PCM-5893L

Summary of Contents for Aaeon PCM-5893L

  • Page 1 C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L PCM-5893/5893L All-in-one AMD Geode GX 466/500/533 Processor Compact Board With LCD, Ethernet, Audio & 4 COMs PCM-5893/5893L Rev.
  • Page 2 AAEON assumes no liabilities resulting from errors or omissions in this document, or from the use of the information contained herein. AAEON reserves the right to make changes in the product design without notice to its users.
  • Page 3 C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L Acknowledgments Award is a trademark of Award Software International, Inc. ™ CompactFlash is a trademark of the Compact Flash Association.
  • Page 4 • 1 Jumper Cap - 9657666600 • 1 Quick Installation Guide • 1 PCM-5893 / PCM-5893L CPU Board • 1 Utility CD If any of these items should be missing or damaged, please contact your distributor or sales representative immediately.

  • Page 5: Table Of Contents

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L Contents Chapter 1 General Information 1.1 Introduction..............1-2 1.2 Features ..............1-3 1.3 Specifications ............1-4 Chapter 2 Quick Installation Guide 2.1 Safety Precautions ............
  • Page 6 C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L 2.17 TFT LCD (CN5) ............2-14 2.18 USB Port #1 and Port #2 (CN6) ......2-14 2.19 Front Panel (CN7) ...........
  • Page 7 C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L Chapter 4 Driver Installation 4.1 Software Drivers............4-2 4.2 Necessary to Know ........... 4-3 4.3 Installing VGA Driver ..........

  • Page 8: Chapter 1 General Information

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L Chapter General Information 1- 1 Chapter 1 General Information...

  • Page 9: Introduction

    AAEON＇s PC/104 peripheral module and Mini PCI module series. It makes PCM-5893 / PCM-5893L so flexible to adapt to legacy devices or middle-high level devices, to be robust in electromagnetically noisy environments and to expand more peripheral interfaces.

  • Page 10: Features

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L 1.2 Features • Onboard AMD Geode™ GX 466/500(Optional) /533 Series Processor • 18/24-bit TTL TFT LCD / 24-bit DSTN LCD (PCM-5893 only) •...

  • Page 11: Specifications

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L 1.3 Specifications System • CPU: Onboard AMD Geode™ GX 466/500(optional) /533 (333/366/400MHz) CPU Memory: 184-pin DDR SDRAM x 1, Max.
  • Page 12 Board Size: 8”(L) x 5.75”(W) (203mm x 146mm) Gross Weight: 1.2lb (0.5kg) Operating Temperature: 32°F~140°F (0°C~60°C) Display Chip: AMD Geode™ GX ( PCM-5893L SMI SM712 ( PCM-5893 Memory: Built-in 4MB SDRAM (PCM-5893) Shared System Memory up to 16MB ( PCM-5893L...
  • Page 13 C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L RS-232/422/485 x 1, Parallel x 1 IrDA: One IrDA Tx/Rx Header Audio: MIC-in, Line-in, Line-out, CD-in (include Stereo Amplifier) USB: Two 5 x 2 Pin Headers Support...

  • Page 14: Chapter 2 Quick Installation Guide

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L Chapter Quick Installation Guide Notice: The Quick Installation Guide is derived from Chapter 2 of user manual. For other chapters further installation...

  • Page 15: Safety Precautions

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L 2.1 Safety Precautions Always completely disconnect the power cord from your board whenever you are working on it.

  • Page 16: Location Of Connectors And Jumpers

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L 2.2 Location of Connectors and Jumpers Component Side CN20 CN18 CN21 CN19 CN17 CN16 CN14 CN15 DIMM1...
  • Page 17 C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L Solder Side CFD1 2 - 4 Chapter 2 Quick Installation Guide...

  • Page 18: Mechanical Drawing

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L 2.3 Mechanical Drawing Component Side 17.80 14.40 8.50 198.12 194.95 193.04 193.04 187.48 187.85 187.21 185.42 180.50...
  • Page 19 C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L Solder Side 198.10 180.11 0.00 5.08 2 - 6 Chapter 2 Quick Installation Guide...

  • Page 20: List Of Jumpers

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L 2.4 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application.

  • Page 21: List Of Connectors

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L 2.5 List of Connectors The board has a number of connectors that allow you to configure your system to suit your application.
  • Page 22 C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L CN20 Floppy CN21 Ethernet 10/100 Base-TX RJ-45 Phone Jack MPCI1 Mini PCI CFD1 Compact Flash Disk PCI1 PCI Slot CN13...

  • Page 23: Setting Jumpers

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L 2.6 Setting Jumpers You configure your card to match the needs of your application by setting jumpers.

  • Page 24: Lcd Clock Operating Mode (Jp1)

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L 2.7 LCD Clock Operating Mode (JP1) Function Normal Shift Clock (default) 2.8 CRT/TFT LCD mode Selection (JP2) (Optional function) Function TFT LCD CRT (default)

  • Page 25: At/Atx Power Type Selection (Jp5)

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L Disable Function (Default) Open Short Short 2.10 AT/ATX Power Type Selection (JP5) Function 1-2(short) ATX Power Supply (default) 1-2(open) AT Power Supply...

  • Page 26: Com Ports Ri/+5V/+12V Selection

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L 2.13 COM Ports RI/+5V/+12V Selection COM1 (JP8) Function +12V RI (default) COM2 (JP10) JP10 Function +12V 9-10...

  • Page 27: Irda (Cn2)

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L +12V FAN Sense 2.15 IrDA (CN2) Signal CIR_TX (Optional) CIR_RX (Optional) 2.16 CAN BUS (CN4) (Optional function) Signal Signal CANH...

  • Page 28: Usb Port #1 And Port #2 (Cn6)

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L Clock VSYNC HSYNC VEE Enable Note: Please change BIOS setup as below when you want to use simultaneous display or dual view display.

  • Page 29: Front Panel (Cn7)

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L 2.19 Front Panel (CN7) Signal ATX Power-on Button HDD Active LED External Speaker Power LED 9-10 System Reset Button 2.20 USB Port #3 and Port #4 (CN8)
  • Page 30 C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L IRQ11 LS21 IRQ12 LS20 IRQ15 LS19 IRQ14 LA18 DACK0# LA17 DRQ0 MEMR# DACK5# MEMW# DRQ5 DACK6# DRQ6...
  • Page 31 C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L IOW# IOR# DACK3# DRQ3 DACK1# DRQ1 REFRESH# SYSCLK IRQ7 IRQ6 IRQ5 IRQ4 IRQ3 DACK2# BALE PCM-5893/5893L does not support PC/104 way legacy ISA-DMA mode cause by AMD architecture.

  • Page 32: Atx Power Socket (Cn10)

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L Retrieve the resource of the PC/104 card. The information is typically contained in the manual of the PC/104 card. Push a function key “Delete”...

  • Page 33: At Power Socket (Cn11)

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L 5VSB +12V 2.23 AT Power Socket (CN11) Signal +12V -12V 2.24 IDE Hard Drive (CN12) Signal Signal RESET#...

  • Page 34: Crt Display (Cn14)

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L DREQ IOW# IOR# IORDY DACK# IRQ14 PDIAG# CS#1 CS#3 Active LED# 2.25 CRT Display (CN14) Signal Signal GREEN...

  • Page 35: Audio Input/Output/ Cd-In/ Mic (Cn15)

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L 2.26 Audio Input/ Output/ CD-in/ MIC (CN15) Signal Signal MIC Vcc Audio Ground CD_GND LINE_IN L CD_L LINE_IN R...

  • Page 36: Digital I/O (Cn18)

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L 2.28 KB/MS Connector (CN17) Signal Signal Keyboard Data Keyboard Clock Mouse Data Mouse Clock 2.29 Digital I/O (CN18) Signal Signal...

  • Page 37: Serial Port (Cn19)

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L 2.30 Serial Port (CN19) Note: COM 1 & COM 2 support full modem control signals and COM 3 & COM 4 support TX &...

  • Page 38: Floppy (Cn20)

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L COM / RS-422 mode Signal Signal TXD- RXD+ TXD+ RXD- COM / RS-485 mode Signal Signal TXD-...

  • Page 39: Ethernet 10/100Base-Tx Rj-45 Phone Jack (Cn21)

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L WDATA# WGATE# TRK0# WPT# RDATA# HDSEL# DSKCHG# 2.32 Ethernet 10/100 Base-TX RJ-45 Phone Jack (CN21) Signal Signal TXD+...

  • Page 40: Pci Slot (Pci1)

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L CS#1 CS#3 IOR# IOW# +5V. IRQ14 CSEL# RESET# IORDY DREQ DACK# DASP# PDIAG# IO16# 2.35 PCI Slot (PCI1) Standard Specification.

  • Page 41: Lan Led (Cn13) (Eeprom 10)

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L 2.36 LAN LED (CN13) (EEPROM 10) Signal Signal +3.3V +3.3V +3.3V 2.37 DOC (U11) Standard Specification.

  • Page 42: Chapter 3 Award Bios Setup

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L Chapter Award BIOS Setup Chapter 3 Award BIOS Setup 3-1...

  • Page 43: System Test And Initialization

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L 3.1 System Test and Initialization These routines test and initialize board hardware. If the routines encounter an error during the tests, you will either hear a few short beeps or see an error message on the screen.

  • Page 44: Award Bios Setup

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L 3.2 Award BIOS Setup Awards BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration.
  • Page 45 C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L Advanced Chipset Features Use this menu to change the values in the chipset registers and optimize your system performance.
  • Page 46 Save CMOS value changes to CMOS and exit setup. Exit Without Saving Abandon all CMOS value changes and exit setup. You can refer to the "AAEON BIOS Item Description.pdf" file in the CD for the meaning of each setting in this chapter.
  • Page 47 C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L Chapter Driv Installation 4 - 1 Chapter 4 Driver Installation...

  • Page 48: Chapter 4 Driver Installation

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L 4.1 Software Drivers This chapter describes the operation and installation of the display drivers supplied on the Supporting CD-ROM that are shipped with your product.

  • Page 49: Necessary To Know

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L 4.2 Necessary to Know The instructions in this manual assume that you understand elementary concepts of MS-DOS and the IBM Personal Computer. Before you attempt to install any driver from the Supporting CD-ROM, you should: Know how to copy files from a CD-ROM to a directory on the...

  • Page 50: Installing Vga Driver

    P C M - 5 8 9 3 / 5 8 9 3 L 4.3 Installing VGA Driver Win XP (PCM-5893) / WinXP_Xpe (PCM-5893L) VGA Place the Driver CD-ROM into your CD-ROM drive and pull up the CD-ROM file on your screen.
  • Page 51 C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L 14. Click on Next. 15. Click on Yes. 16. Click on Finish. Note: The user must install this system driver before install other device drivers.

  • Page 52: Installing Pci To Isa Bridge Driver

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L 4.4 Installing PCI to ISA Bridge Driver Win XP / Win XPe System Place the Driver CD-ROM into your CD-ROM drive and pull up the CD-ROM file on your screen.

  • Page 53: Installing Audio Driver

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L 4.5 Installing Audio Driver Win XP / Win XPe Audio Place the Driver CD-ROM into your CD-ROM drive and pull up the CD-ROM file on your screen.

  • Page 54: Installing Ethernet Driver

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L 4.6 Installing Ethernet Driver Win XP / Win XPe Ethernet Place the Driver CD-ROM into your CD-ROM drive and pull up the CD-ROM file on your screen.

  • Page 55: Ethernet Software Configuration

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L 4.7 Ethernet Software Configuration The onboard Ethernet interface supports all major network operating systems. I/O addresses and interrupts are easily configured via the Insyde BIOS Setup.
  • Page 56 C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L 1. Run EEPROM test 2. Run Diagnostics on Board 3. Run Diagnostics on Network Each option has its own display screen, which shows the format and result of any diagnostic tests undertaken.

  • Page 57: Appendix A Programming The Watchdog Timer

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L Appendi Programming the Watchdog Timer A - 1 Appendix A Programming the Watchdog Timer...

  • Page 58: Programming

    PCM-5893/5893L utilizes ITE 8712 chipset as its watchdog timer controller. Below are the procedures to complete its configuration and the AAEON intial watchdog timer program is also attached based on which you can develop customized program to fit your application.
  • Page 59 C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L There are three steps to complete the configuration setup: (1) Enter the MB PnP Mode; (2) Modify the data of configuration registers;...
  • Page 60 C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L WatchDog Timer Configuration Registers Configure Control (Index=02h) This register is write only. Its values are not sticky; that is to say, a hardware reset will automatically clear the bits, and does not require the software to clear them.
  • Page 61 C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L WatchDog Timer Control Register (Index=71h, Default=00h) WatchDog Timer Configuration Register (Index=72h, Default=00h) WatchDog Timer Time-out Value Register (Index=73h, Default=00h) A - 5 Appendix A Programming the Watchdog Timer...

  • Page 62: Ite8712 Watchdog Timer Initial Program

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L A.2 ITE8712 Watchdog Timer Initial Program .MODEL SMALL .CODE Main: CALL Enter_Configuration_mode CALL Check_Chip mov cl, 7 call Set_Logic_Device ;time setting...
  • Page 63 C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L ; game port enable mov cl, 9 call Set_Logic_Device Initial_OK: CALL Exit_Configuration_mode MOV AH,4Ch INT 21h Enter_Configuration_Mode PROC NEAR MOV SI,WORD PTR CS:[Offset Cfg_Port]...
  • Page 64 C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L Exit_Configuration_Mode ENDP Check_Chip PROC NEAR MOV AL,20h CALL Read_Configuration_Data CMP AL,87h JNE Not_Initial MOV AL,21h CALL Read_Configuration_Data CMP AL,12h JNE Not_Initial...
  • Page 65 C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L MOV DX,WORD PTR CS:[Cfg_Port+06h] IN AL,DX Read_Configuration_Data ENDP Write_Configuration_Data PROC NEAR MOV DX,WORD PTR CS:[Cfg_Port+04h] OUT DX,AL XCHG AL,AH MOV DX,WORD PTR CS:[Cfg_Port+06h]...
  • Page 66 C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L Set_Logic_Device proc near push ax push cx xchg al,cl mov cl,07h call Superio_Set_Reg pop cx pop ax Set_Logic_Device endp ;Select 02Eh->Index Port, 02Fh->Data Port...

  • Page 67: Appendix B I/O Information

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L Appendix I/O Information B - 1 Appendix B I/O Information...

  • Page 68: I/O Address Map

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L B.1 I/O Address Map Address Description User Address 000-01F DMA Controller #1 000-000F 020-03F Interrupt Controller #1, Master 020-021 040-05F...

  • Page 69: Irq Mapping Chart

    C o m p a c t B o a r d P C M - 5 8 9 3 / 5 8 9 3 L B.3 IRQ Mapping Chart IRQ0 System Timer IRQ8 System CMOS / Real time clock IRQ1 Keyboard IRQ9 Microsoft ACPI –...

This manual is also suitable for:

Pcm-5893

Table of Contents