Aaeon PCM-5895 Manual
  1. Manuals
  2. Brands
  3. Aaeon Manuals
  4. Motherboard
  5. PCM-5895
  6. Manual

Aaeon PCM-5895 Manual

Onboard amd geode lx 800/900 processor up to 24-bit lvds lcd 184-pin ddr 333/400 memory up to 1gb 4 usb 2.0 / 8-bit digital i/o / 4 com
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
C o m p a c t B o a r d
P C M - 5 8 9 5 R e v . B
PCM-5895 Rev.B
Onboard AMD Geode LX 800/900 Processor
Up to 24-bit LVDS LCD
184-pin DDR 333/400 Memory Up to 1GB
4 USB 2.0 / 8-bit Digital I/O / 4 COM
PCM-5895 Rev.B Manual 2
nd
Ed.
December 22, 2014

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PCM-5895 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Aaeon PCM-5895

Summary of Contents for Aaeon PCM-5895

  • Page 1 P C M - 5 8 9 5 R e v . B PCM-5895 Rev.B Onboard AMD Geode LX 800/900 Processor Up to 24-bit LVDS LCD 184-pin DDR 333/400 Memory Up to 1GB 4 USB 2.0 / 8-bit Digital I/O / 4 COM PCM-5895 Rev.B Manual 2 December 22, 2014...

  • Page 2: Copyright Notice

    AAEON assumes no liabilities resulting from errors or omissions in this document, or from the use of the information contained herein. AAEON reserves the right to make changes in the product design without notice to its users.
  • Page 3 C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B Acknowledgments All other products’ name or trademarks are properties of their respective owners. Award is a trademark of Award Software International, Inc. CompactFlash™...

  • Page 4: Packing List

    P C M - 5 8 9 5 R e v . B Packing List Before you begin installing your card, please make sure that the following materials have been shipped: • 1 PCM-5895 Rev.B CPU Card • 1 Quick Installation Guide • 1 CD-ROM for manual (in PDF format) and drivers •...
  • Page 5 C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B Contents Chapter 1 General Information 1.1 Introduction..............1-2 1.2 Features ..............1-3 1.3 Specifications ............1-4 Chapter 2 Quick Installation Guide 2.1 Safety Precautions ............
  • Page 6 C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B 2.17 Front Panel (CN7) ........... 2-13 2.18 USB Port #3 & Port #4 (CN8)........2-14 2.19 PC/104 ISA Interface (CN9)........
  • Page 7 C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B Chapter 3 Award BIOS Setup 3.1 System Test and Initialization........3-2 3.2 Award BIOS Setup ............ 3-3 Chapter 4 Driver Installation 4.1 Software Drivers............
  • Page 8 C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B Chapter General Information 1- 1 Chapter 1 General Information...

  • Page 9: Introduction

    Regarding the multimedia performance of PCM-5895 Rev.B, it features CRT/LCD simultaneous display. The LVDS/TTL TFT LCD is up to 24-bit and the rich audio I/O interface that PCM-5895 Rev.B possesses supports MIC-in, Line-in, Line-out and CD-in functions. In addition, PCM-5895 Rev.B deploys 4 COM ports--three RS-232 ports (COM3, 4 only support Tx, Rx) and one RS-232/422/485 port.

  • Page 10: Features

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B 1.2 Features Onboard AMD Geode LX 800/900 Processor One DIMM DDR 333/400 up to 1GB Up to 24-bit LVDS TFT Panel, TTL/LVDS LCD, CRT Dual 10/100Base-TX Ethernet Supports PC/104+ Expansion Slot...

  • Page 11: Specifications

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B 1.3 Specifications System Onboard AMD Geode LX800 (900 optional) Processors System Memory 184-pin DDR DIMM x 1, Max.
  • Page 12 C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B Board Size 8”(L) x 5.72” (W) (203mm x 146mm) Gross Weight 1.2 lb (0.5 kg) Display: Supports CRT/LCD Simultaneous display Chipset AMD Geode LX800/900...
  • Page 13 C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B IrDA One IrDA Tx/Rx header Audio Realtek ALC203 2CH AC97 Codec, Mic-in/ Line-in/ Line-out/ CD-in CAN Bus Optional dual CAN Bus 1- 6...
  • Page 14 C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B Chapter Quick Installation Guide Notice: The Quick Installation Guide is derived from Chapter 2 of user manual. For other chapters further installation...

  • Page 15: Safety Precautions

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B 2.1 Safety Precautions Always completely disconnect the power cord from your board whenever you are working on it.

  • Page 16: Location Of Connectors And Jumpers

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B 2.2 Location of Connectors and Jumpers Component Side Chapter 2 Quick Installation Guide...
  • Page 17 C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B Solder Side 2- 4 Chapter 2 Quick Installation Guide...

  • Page 18: Mechanical Drawing

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B 2.3 Mechanical Drawing Component Side Chapter 2 Quick Installation Guide...
  • Page 19 C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B Solder Side 2- 6 Chapter 2 Quick Installation Guide...

  • Page 20: List Of Jumpers

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B 2.4 List of Jumpers The board has a number of jumpers that allow you to configure your system to suit your application.

  • Page 21: List Of Connectors

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B 2.5 List of Connectors The board has a number of connectors that allow you to configure your system to suit your application.
  • Page 22 C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B CN23 TFT LCD Connector CN24 LVDS Connector CN25 LAN2 LED CN26 Ethernet 10/100Base-TX RJ-45 Phone Jack (LAN1) CN27 LCD Inverter Connector CN28...

  • Page 23: Setting Jumpers

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B 2.6 Setting Jumpers You configure your card to match the needs of your application by setting jumpers.

  • Page 24: At/Atx Power Type Selection (Jp2)

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B 2.7 AT/ATX Power Type Selection (JP2) Function ATX Power Supply (Default) AT Power Supply 2.8 CFD Master/Slave Selection (JP6) Function Slave (Default) Master...

  • Page 25: Lcd Power & Clock Selection (Jp12)

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B RI (Default) COM3, COM4 JP11 Function +12V +5V (Default) 2.11 LCD Power & Clock Selection (JP12) JP12 Function Normal (Default)

  • Page 26: Fan Control Circuit Power Selection (Jp18)

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B 2.14 Fan Control Circuit Power Selection (JP18) JP18 Function +12V (Default) 2.15 FAN Connector (CN1) Signal +12V FAN Sense...

  • Page 27: Usb Port #3 & Port #4 (Cn8)

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B Power LED 9-10 System Reset Button 2.18 USB Port #3 & Port #4 (CN8) Signal Signal VDD3 VDD4...
  • Page 28 C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B SMEMW* SMEMR* IOW* IOR* DACK3* DRQ3 DACK1* DRQ1 REFRESH* SYSCLK IRQ7 IRQ6 IRQ5 IRQ4 IRQ3 DACK2* BALE 2-15...
  • Page 29 DACK0* LA17 DRQ0 MEMR* DACK5* MEMW* DRQ5 DACK6* DRQ6 SD10 DACK7* SD11 DRQ7 SD12 SD13 MASTER* SD14 SD15 GND/KEY PCM-5895 Rev.B does not support PC/104 way legacy ISA-DMA mode cause by AMD architecture. 2- 16 Chapter 2 Quick Installation Guide...

  • Page 30: Atx Power Socket (Cn10)

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B I/O Resource Allocation Method of PC/104 card is for the PCM-5895 Rev.B. PC/104 connector at the PCM-5895 Rev.B cannot automatically get related I/O resource when a new PC/104 card is added because of AMD Geode’s...

  • Page 31: At Power Socket (Cn11)

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B 5VSB +12V 2.21 AT Power Socket (CN11) Signal +12V -12V 2.22 IDE Hard Drive (CN12) Signal Signal RESET#...

  • Page 32: Crt Display (Cn 14)

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B DREQ IOW# IOR# IORDY DACK# IRQ14 PDIAG# CS#1 CS#3 Active LED# 2.23 CRT Display (CN14) Signal Signal GREEN...

  • Page 33: Audio Input/ Output/ Cd-In/ Mic (Cn15)

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B VSYNC DDCSCL 2.24 Audio Input/ Output/ CD-in/ MIC (CN15) Signal Signal MIC_VCC Audio Ground CD_GND LINE_IN L CD_L LINE_IN R...

  • Page 34: Keyboard/ Mouse Connector (Cn17)

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B PTD7 ACK# BUSY SLCT 2.26 Keyboard/Mouse Connector (CN17) Signal Signal Keyboard Data Keyboard Clock Mouse Data Mouse Clock 2.27 Digital I/O (CN18) (Mapping with GPIO pins of super I/O)

  • Page 35: Serial Port (Cn19)

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B Port 4 CN18. pin 4 Bit 4 U40. pin 23 (GPIO24) Port 5 CN18. pin 5 Bit 3 U40.
  • Page 36 C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B RXD4 TXD4 +5V/+12V COM/ RS-422 mode Signal Signal TXD- RXD+ TXD+ RXD- COM/ RS-485 mode Signal Signal TXD-...

  • Page 37: Lan Led (Cn13, Cn25)

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B RXD+ NC (N GND) NC (N GND) RXD- NC (C GND) NC (C GND) 2.30 LAN LED (CN13, CN25) Signal Signal +3.3V...
  • Page 38 C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B LCD_CLK LCD_VS LCD_DE LCD_HS For 18-bit TFT LCD Signal Signal +5VLCD +5VLCD +3.3VLCD +3.3VLCD BKL_EN 2-25 Chapter 2 Quick Installation Guide...

  • Page 39: Lvds (Cn24)

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B LCD_CLK LCD_VS LCD_DE LCD_HS 2.32 LVDS (CN24) Signal Signal BKL_EN VLCD LVDS_CLK# LVDS_CLK VLCD TX0# TX1# TX2# TX3#...

  • Page 40: Ethernet 10/100Base-Tx Connector (Cn26)

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B 2.33 Ethernet 10/100Base-TX Connector (CN26) Signal Signal RXD- RXD+ NC (N GND) NC (N GND) NC (C GND) NC (C GND) TXD+...

  • Page 41: Can Bus Connector (Cn30, Cn31)

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B 2.36 CAN Bus Connector (CN30, CN31) Signal Signal CAN_L ISO_GND CAN_H 2.37 CompactFlash Disk Slot (CFD1) Signal Signal CS#0...
  • Page 42 C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B CSEL# RESET# IORDY DREQ DACK# DASP# PDIAG# IO16# Note: There is a limitation when supports Compact Flash and a hard disk drive on the same IDE channel.

  • Page 43: Pci-104 Slot (Pci1)

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B The problem is related to the fact that one device is on the cable and the other is populated on the motherboard.
  • Page 44 C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B Below Table for China RoHS Requirements 产品中有毒有害物质或元素名称及含量 AAEON Main Board/ Daughter Board/ Backplane 有毒有害物质或元素 部件名称 铅...

  • Page 45: Bios Setup

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B Chapter Award BIOS Setup Chapter 3 Award BIOS Setup 3-1...

  • Page 46: System Test And Initialization

    3. The CMOS memory has lost power and the configuration information has been erased. The PCM-5895 Rev.B CMOS memory has an integral lithium battery backup for data retention. However, you will need to replace the complete unit when it finally runs down.

  • Page 47: Award Bios Setup

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B 3.2 Award BIOS Setup Awards BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration.
  • Page 48 Save CMOS value changes to CMOS and exit setup. Exit Without Saving Abandon all CMOS value changes and exit setup. You can refer to the "AAEON BIOS Item Description.pdf" file in the CD for the meaning of each setting in this chapter. Chapter 3 Award BIOS Setup 3-4...
  • Page 49 C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B Chapter Driver Installation 4 - 1 Chapter 4 Driver Installation...

  • Page 50: Software Drivers

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B 4.1 Software Drivers This chapter describes the operation and installation of the display drivers supplied on the Supporting CD-ROM that are shipped with your product.

  • Page 51: Necessary To Know

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B 4.2 Necessary to Know The instructions in this manual assume that you understand elementary concepts of MS-DOS and the IBM Personal Computer. Before you attempt to install any driver from the Supporting CD-ROM, you should: Know how to copy files from a CD-ROM to a directory on the...

  • Page 52: Installing Vga Driver

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B 4.3 Installing VGA Driver Win XP / Win XPe VGA Place the Driver CD-ROM into your CD-ROM drive and follow the steps below to install.

  • Page 53: Installing Aes Driver

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B 4.4 Installing AES Driver Win XP / Win XPe AES Place the Driver CD-ROM into your CD-ROM drive and follow the steps below to install.

  • Page 54: Installing Pci To Isa Bridge Driver

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B 4.5 Installing PCI to ISA Bridge Driver Win XP / Win XPe System Place the Driver CD-ROM into your CD-ROM drive and follow the following steps to install.

  • Page 55: Installing Lan Driver

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B 4.6 Installing LAN Driver 1. Click on the Step 4 –lan folder and double click on the Setup.exe 2.

  • Page 56: Installing Audio Driver

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B information. After you have made your selections and the configuration is what you want, press <ESC>. A prompt will appear asking if you want to save the configuration.

  • Page 57: Installing Can Bus Driver

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B 8. Click on Next 9. Select Search for a suitable driver…, then click on Next 10.

  • Page 58: Watchdog Timer

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B Appendix Programming the Watchdog Timer A - 1 Appendix A Programming the Watchdog Timer...

  • Page 59: A.1 Programming

    P C M - 5 8 9 5 R e v . B A.1 Programming PCM-5895 Rev.B utilizes ITE 8712 chipset as its watchdog timer controller. ( K version ) Below are the procedures to complete its configuration and the AAEON intial watchdog timer program is also attached based on which you can develop customized program to fit your application.
  • Page 60 C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B (1) Enter the MB PnP Mode To enter the MB PnP Mode, four special I/O write operations are to be performed during Wait for Key state.
  • Page 61 C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B Returns to the Wait for Key state. This bit is used when the configuration sequence is completed. Resets all logical devices and restores configuration registers to their power-on states.

  • Page 62: A.2 Ite 8712 Watchdog Timer Initial Program

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B A.2 ITE8712 Watchdog Timer Initial Program .MODEL SMALL .CODE Main: CALL Enter_Configuration_mode CALL Check_Chip mov cl, 7 call Set_Logic_Device ;time setting mov cl, 10 ;...
  • Page 63 C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B ; game port enable mov cl, 9 call Set_Logic_Device Initial_OK: CALL Exit_Configuration_mode MOV AH,4Ch INT 21h Enter_Configuration_Mode PROC NEAR MOV SI,WORD PTR CS:[Offset Cfg_Port] MOV DX,02Eh...
  • Page 64 C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B Exit_Configuration_Mode ENDP Check_Chip PROC NEAR MOV AL,20h CALL Read_Configuration_Data CMP AL,87h JNE Not_Initial MOV AL,21h CALL Read_Configuration_Data CMP AL,12h JNE Not_Initial...
  • Page 65 C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B MOV DX,WORD PTR CS:[Cfg_Port+06h] IN AL,DX Read_Configuration_Data ENDP Write_Configuration_Data PROC NEAR MOV DX,WORD PTR CS:[Cfg_Port+04h] OUT DX,AL XCHG AL,AH MOV DX,WORD PTR CS:[Cfg_Port+06h]...
  • Page 66 C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B Set_Logic_Device proc near push ax push cx xchg al,cl mov cl,07h call Superio_Set_Reg pop cx pop ax Set_Logic_Device endp ;Select 02Eh->Index Port, 02Fh->Data Port...
  • Page 67 C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B Appendix I/O Information B - 1 Appendix B I/O Information...

  • Page 68: B.1 I/O Address Map

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B B.1 I/O Address Map User Address Description Address 000-01F DMA Controller #1 000-000F 020-03F Interrupt Controller #1, Master 020-021 040-05F System Time...

  • Page 69: B.3 Irq Mapping Chart

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B B.3 IRQ Mapping Chart IRQ0 System Timer IRQ8 System CMOS / Real time clock IRQ1 Keyboard IRQ9 Microsoft ACPI –...
  • Page 70 C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B Appendix Mating Connecotor C - 1 Appendix C Mating Connector...

  • Page 71: C.1 List Of Mating Connectors And Cables

    C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B C.1 List of Mating Connectors and Cables The table notes mating connectors and available cables. Connector Function Mating Connector Available...
  • Page 72 C o m p a c t B o a r d P C M - 5 8 9 5 R e v . B 【2.0mm】 CN16 Parallel Astron Parallel 1701260200 Port Port 26-4101-213-1G-R Cable 【2.0mm】 CN17 KB/MS Keyboard 1700060152 Connector Base &...

Table of Contents