Aaeon PCM-5890 Manual page 40

3. At the prompt, enter the new BIN file which supports your
display. When you are sure that you have entered the file name
correctly press <Enter>.
4. The screen will ask "Do you want to save BIOS?" If you
change your mind or have made a mistake, press N to abort and
end the setup procedure. Press Y if you wish to save the
existing configuration before changing it. Then type the name
under which you want to save the current configuration.
5. The prompt will then ask "Are you sure to program?" Press Y
if you want the new file to be written into the BIOS. Press N
to exit the program.
The new VGA configuration will then write to the ROM BIOS
chip. This configuration will remain the same until you run the
AWDFLASH.EXE program and change the settings.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Chapter 3 Software Configuration 31