Aaeon PCM-5890 Manual page 62

To change the password, choose the PASSWORD SETTING
option form the Setup main menu and press <Enter>.
1. If the CMOS is bad or this option has never been used, there is
default password which is stored in the ROM. The screen will
display the following messages:
Press <Enter>.
2. If the CMOS is good or this option has been used to change
the default password, the user is asked for the password stored
in the CMOS. The screen will display the following message:
Enter the current password and press <Enter>.
3. After pressing <Enter> (ROM password) or the current
password (user-defined), you can change the password stored
in the CMOS. The password can be at most 8 characters long.
Remember - to enable this feature, you must first select either
Setup or System in the BIOS FEATURES SETUP.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Enter Password:
Confirm Password:
Chapter 4 Award BIOS Setup 53