Windows 95; Dos - Aaeon PCM-5890 Manual

After you change display drivers, you may notice that the color
scheme used by Windows looks strange. This is because different
drivers have different default colors. You can correct this by choos-
ing the same color scheme or a new color scheme. First select the
Control Panel from the Main window. Select the Color icon. You
will be shown the current color scheme. Choose a new color scheme
and click the OK button.
1. Install Windows as you normally would for a VGA display. Run
Windows to make sure that it is working correctly. Then exit from
Windows.
2. Place the Display Driver Diskette #1 in drive A. Type A: <EN-
TER> to make this the default drive.
3. Type SETUP <ENTER> to run the driver SETUP program. Press
any key to get to the applications list.
4. Using the arrow keys, select Windows Version 3.1 and press the
<ENTER> key. Press the <ENTER> key to select All Resolu-
tions, then press <END> to begin the installation.
5. At this point you will be asked for the path to your Windows
System directory (default C:\WINDOWS). When the installation
is complete, press any key to continue. Press <ESC> followed by
Y to exit to DOS.
6. Change to the directory where you installed Windows (usually
C:\WINDOWS).
7. Type SETUP <ENTER> to run the Windows Setup program. It
will show the current Windows configuration. Use the up arrow
key to move to the Display line and press <ENTER>.
8. A list of display drivers will be shown. Use the arrow keys to
select one of the drivers starting with an asterisk (*) and press
<ENTER>.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com