Hanseatic MC-IF7222H1CC User Manual page 48

Page GB-18 Timer function
Setting the cooking time limit
Sensor Action
Touch the sensor of
the desired cooking
/
zone/area.
10
Touch.
(9)
Swipe to set single
minute unit.
(14)
15
Touch.
(9)
Swipe to set ten
(14) minute unit.
Touch.
The countdown
begins.
The cooking zone/
area will switch off
35
after 35 minutes.
(9)
One dot in the heat
setting display
signals that the
cooking time limit is
active.
Notes on cooking time limit
– You can set cooking time limits for all cook-
ing zones/areas.
– If a cooking time limit is active for several
cooking zones/areas, the red dot for the
cooking zone/area with the shortest cook-
ing time limit flashes.
– Once the cooking time limit of a cooking
zone/area is reached, this cooking zone/
area switches off automatically.
– If all cooking zones/areas are switched off,
the hob also switches off automatically af-
ter a short time.
Changing the cooking time limit
You can change a pre-set cooking time limit
D i s p l a y /
at any time.
Example
1. Touch the sensor of the cooking zone/
area for which you would like to change
4
the cooking time limit.
The heat setting display of the selected
cooking zone/area flashes.
1 0
2. Touch the timer sensor (9).
The remaining cooking time flashes for a
1 5
few seconds. While the display is flashing,
the setting can be changed as described
above.
1 5
Removing the cooking time limit
3 5
Sensor
3 5
/
26
(9)
4 ·
(14)
20
(9)
(14)
00
(9)
D i s p l a y /
Action
Example
Touch the sensor of
the desired cooking
zone/area.
Touch.
The remaining
2 6
cooking time is dis-
played.
Swipe left, until "0"
2 0
is displayed.
Touch.
2 0
Swipe left, until "0"
0 0
is displayed.
Touch.
The cooking time
- -
limit is deactivated.
The dot in the heat
setting display is
gone.
4 ·
4