Aftermarket Ordering Procedure - Hitachi SRL Series Instruction Manual

Standard Specifications (continued)
Model
Output
Maximum Rated Pressure
Factory Pressure Settings
Operating Ambient Temperature Range ° F (℃ )
Free Air Delivery
Power Requirements
Main Electric Motor Amp Draw
Total Package Amp Draw
Scroll Head Revolutions
Compressed Air Discharge Connection Size
Inside Air Receiver
Package Dimensions
Weight
Sound Level
NOTE:
1. The capacity is the compressed air value for which the air quantity is discharged at maximum pressure
and is converted to an atmospheric condition.
2. The sound level is measured at 59 in. in the front and at a height of 39 in. at full-load in an anechoic
room.
3. It is necessary to add a remote air receiver with a volume that exceeds 80 Gallons.
4. The specification and design of the SRL air compressor may be subject to change without notice.
5. The package dimensions represent the enclosure panel dimensions.
6. The total package amp draw includes the amperage draw of the electric motor and ventilating fan of
the air compressor package.
● Do not use the air compressor to compress any gas other than air.
Using the air compressor to compress any gas other than air may lead to damage of the air compressor.
● SRL air compressors are not designed, intended or approved for breathing air applications. Hitachi
does not approve specialized equipment for breathing air applications and assumes no responsibility
or liability for compressors used for breathing air services.
● If the scroll air compressor is used for any important production equipment, it is highly recommended
to utilize a back up air compressor.
A back up air compressor will keep production running in the event of a failure to an air compressor.

Aftermarket Ordering Procedure

Ordering Replacement Parts
1. Use genuine HITACHI parts.
2. Verify the information on the compressor nameplate (see page 4)
prior to contacting the local Hitachi distributor for parts and/or service.
3. Review the Parts List on page 33 prior to contacting the local Hitachi
distributor.
SRL -
HP(kW)
PSIG (MPa)
PSIG (MPa)
CFM (L/min)
V/ Φ /Hz
A
A
-1
min
[L × W × H] Inch (mm)
lb (kg)
dB[A]
M6
Maximum rated pressure check :
L : 122PSIG, H : 145PSIG
Power requirement check :
L : AC208/230V, M : AC460V
Output check : 7.5, 11 or 16.5kW
SRL-7.5M6MH SRL-11M6MH
10 (7.7)
ON : 115 (0.79) － OFF : 145 (1.0)
32 － 104 (0 － 40)
23.7 (670)
AC 460/3-ph/60
4.1 ＋ 9.3
14.4
3,015 (2.2kW)
2,785 (5.5kW)
"3/4" NPT Male
Without (External air receiver should exceed 80 Gallons)
38.58 × 27.95 × 52.95
(980 × 710 × 1,345)
814 (369)
57
WARNING
37
SRL-16.5M6MH
15 (11)
145 (1.0)
32.7 (925) 48.9 (1,385)
9.3 × 2
19.3
2,785
"1" NPT Male
50.39 × 30.31 × 58.86
(1,280 × 770 × 1,495)
891 (404) 1,283 (582)
59
22 (16.5)
9.3 × 3
28.8
2,785
61