Satel INT-AV Manual

INT-AV
AUDIO ALARM VERIFICATION MODULE
The INT-AV module enables audio alarm verification to reduce the number of false alarms.
After having received alarm message from the control panel, the operator of telephone
monitoring station is able to listen-in on the sounds coming from the premises to confirm
whether there is an intrusion. Owing to the module, the operator can try to contact the people
on the premises to determine if the alarm is real or false. The listen-in and talk features are
also available to the alarm system users. They can call the control panel number and, after
entering the telephone code, get access to these features at any time.
Listen-in and communication with the people on the protected premises are possible due to
the INT-AVT terminals. The terminal is equipped with a microphone and a speaker. The
module delivery set includes one INT-AVT terminal. Up to four INT-AVT terminals can be
connected to the module.
The module works with the INTEGRA / INTEGRA Plus control panels (firmware version 1.12
or newer). This manual applies to the module electronics version 1.4 and firmware version
1.00 (or newer).
Notes:
 Only one INT-AV module can be connected to the control panel.
 If an INT-VG module is connected to the control panel, the module firmware version must
be 1.02 or newer.
1. INT-AV module features
 Two-way (listen-in / talk) audio alarm verification.
 Keeping telephone connection with the monitoring station open after the control panel has
sent alarm message (line hold mode).
 Receiving phone calls from the monitoring station after the control panel has sent alarm
information (call back mode).
 Availability of the listen-in / talk features to the users having a telephone code.
 Support for up to four INT-AVT terminals.
2. Specifications
Supply voltage ................................................................................................... 12 V DC ±15%
Standby current consumption ..........................................................................................35 mA
Maximum current consumption (INT-AV + 1xINT-AVT) .................................................160 mA
Maximum current consumption (INT-AV + 4xINT-AVT) .................................................500 mA
Environmental class according to EN50130-5 ......................................................................... II
Operating temperature range..................................................................................-10...+55 °C
Maximum humidity .......................................................................................................... 93±3%
Dimensions
INT-AV (electronics board) ............................................................ 57 x 80 mm
INT-AVT (enclosure).............................................................35 x 127 x 22 mm
int-av_en 08/13