Enabling And Disabling Parksense - Dodge Charger SRT 392 2017 Operating Information Manual

Rear Distance Greater than
(in/cm) 79 inches
(200 cm)
Audible Alert None
Chime
Arc — Left None
Rear
Arc — Center None
Rear
Arc — Right None
Rear
Radio Volume No
Reduced

Enabling And Disabling ParkSense

ParkSense can be enabled and disabled with
the ParkSense switch, located on the switch
panel below the Uconnect display.
94
WARNING ALERTS
79-59 inches 59-47 inches
(200-150 cm) (150-120 cm)
Single 1/2- Slow
Second Tone (for rear center
(for rear center only)
only)
None None
6th Solid 5th Solid
None None
Yes Yes
ParkSense Switch
47-39 inches 39-25 inches
(120-100 cm) (100-65 cm)
Slow Fast
(for rear center (for rear center
only) only)
None None
4th Solid 3rd Flashing
None None
Yes Yes
Cluster Display" in "Understanding Your Instru-
ment Panel" for further information. When the
gear selector is moved to REVERSE and the
system is disabled, the instrument cluster dis-
play will feature the "PARKSENSE OFF" mes-
sage for as long as the vehicle is in REVERSE.
The ParkSense switch LED will be on when
ParkSense is disabled or defective. The
ParkSense switch LED will be off when the
25-12 inches Less than
(65-30 cm) 12 inches
(30 cm)
Fast Continuous
2nd Flashing 1st Flashing
2nd Flashing 1st Flashing
2nd Flashing 1st Flashing
Yes Yes
When the ParkSense system is dis-
abled, the instrument cluster dis-
play will display the "PARKSENSE
OFF" message for approximately
five seconds. Refer to "Instrument