Dodge Charger SRT 392 2017 Operating Information Manual page 138

The ACC screen may display once again if any
ACC activity occurs, which may include any of
the following:
• Distance Setting Change
• System Cancel
• Driver Override
• System Off
• ACC Proximity Warning
• ACC Unavailable Warning
For further information, refer to "Adaptive Cruise
Control (ACC) — If Equipped" in "Understanding
The Features Of Your Vehicle."
LaneSense — If Equipped
The instrument cluster display displays the cur-
rent LaneSense system settings. The informa-
tion displayed depends on LaneSense system
status and the conditions that need to be met.
For further information, refer to "LaneSense — If
Equipped" in "Understanding The Features Of
Your Vehicle."
Fuel Economy
Two submenu pages one with Current Value
(instantaneous calculation of the fuel economy)
displayed and one without the Current Value
displayed (toggle the left or right arrow button
to select one):
• Current Fuel Economy (MPG, L/100 km,
or km/l).
• Range To Empty (miles or km).
• Average Fuel Economy (MPG, L/100 km,
or km/l).
• The Max and Min values will correspond to
the particular engine requirements.
• Lower end of gauge will be displayed in an
amber color and turn green as Fuel Economy
improves.
• Hold the OK button to reset average fuel
economy information.
Trip Info
Push and release the up or down arrow button
until the Trip Menu item is displayed in the
instrument cluster display. Toggle the left or
right arrow button to select Trip A or Trip B. The
Trip information will display the following:
• Distance – Shows the total distance (mi
or km) traveled for Trip A or Trip B since the
last reset.
• Average Fuel Economy – Shows the average
fuel economy (MPG, L/100km or km/l) of Trip
A or Trip B since the last reset.
• Elapsed Time – Shows the total elapsed time
of travel since the last reset.
Hold the OK button to reset feature information.
Audio
This feature shows the audio information.
Stored Messages
This feature shows the number of stored warn-
ing messages, if any. Pushing the right or left
arrow button will allow you to scroll through the
stored messages.
Screen Setup
Push and release the up or down arrow button
until the Screen Setup Menu displays in the
instrument cluster display. Push and release the
OK button to enter the submenus. The Screen
Setup feature allows you to change what infor-
mation is displayed in the instrument cluster as
well as the location that information is displayed.
1. Upper Left
• Compass
• Outside Temp.
• Time
• Range to Empty (default)
• Average (MPG, L/100 km, or km/l)
• Current (MPG, L/100 km, or km/l)
• Trip A Distance
• Trip B Distance
• None
2. Upper Right
• Compass
• Outside Temp (default)
• Time
• Range to Empty
• Average (MPG, L/100 km, or km/l)
135