Dodge Challenger SRT 2016 Owner's Manual

Table of Contents

Quick Links

Download this manual

Challenger

2 0 1 6

O W N E R ' S M A N U A L

SRT/Hellcat

Table of Contents

Chapters

Table of Contents

Summary of Contents for Dodge Challenger SRT 2016

Page 1 Challenger 2 0 1 6 O W N E R ’ S M A N U A L SRT/Hellcat...
Page 2 This manual illustrates and describes the operation of VEHICLES SOLD IN CANADA With respect to any Vehicles Sold in Canada, the name FCA features and equipment that are either standard or op- US LLC shall be deemed to be deleted and the name FCA tional on this vehicle.
Page 3: Introduction 3
TABLE OF CONTENTS SECTION PAGE INTRODUCTION ............. . . 3 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE .
Page 5: Table Of Contents
INTRODUCTION CONTENTS INTRODUCTION ......4 VEHICLE IDENTIFICATION NUMBER ..6 HOW TO USE THIS MANUAL ....4 VEHICLE MODIFICATIONS/ALTERATIONS .
Page 6: Introduction
4 INTRODUCTION INTRODUCTION When it comes to service, remember that your authorized dealer knows your vehicle best, has factory-trained tech- Congratulations on selecting your new FCA US LLC nicians and genuine MOPAR® parts, and cares about vehicle. Be assured that it represents precision workman- your satisfaction.
Page 7 INTRODUCTION 5...
Page 8: Vehicle Identification Number
6 INTRODUCTION WARNINGS AND CAUTIONS This Owner’s Manual contains WARNINGS against operating procedures that could result in a collision, bodily injury and/or death. It also contains CAUTIONS against procedures that could result in damage to your vehicle. If you do not read this entire Owner’s Manual, you may miss important information.
Page 9: Vehicle Modifications/Alterations
INTRODUCTION 7 VEHICLE MODIFICATIONS/ALTERATIONS WARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death. VIN Location NOTE: It is illegal to remove or alter the VIN.
Page 11 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE CONTENTS ▫ Rearming Of The System ....19 A WORD ABOUT YOUR KEYS ... . .12 ▫...
Page 12 10 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ▫ Programming Additional RKE Key Fobs ..25 DOOR LOCKS ......31 ▫...
Page 13 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 11 OCCUPANT RESTRAINT SYSTEMS ..43 SAFETY TIPS ......95 ▫...
Page 14: A Word About Your Keys
12 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A WORD ABOUT YOUR KEYS (side opposite of the emergency key) of the RKE Key Fob against the engine START/STOP button and push to Your vehicle uses a keyless ignition system. This system operate the ignition.
Page 15: Rke Key Fobs
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 13 RKE Key Fobs NOTE: SRT vehicles, equipped with the 6.2L Super- charged engine, come with three key fobs (two red and one black) that allow for different engine power levels. Please refer to the Drive Modes in the “Uconnect Settings”...
Page 16: Ignition Or Accessory On Message
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Ignition Or Accessory On Message When opening the driver’s door when the ignition is in ACC or ON (engine not running), a chime will sound to remind you to cycle the ignition to OFF. In addition to the chime, the ignition or accessory on message will display in the cluster.
Page 17 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 15 WARNING! WARNING! (Continued) do not leave the ignition of a vehicle equipped • Before exiting a vehicle, always shift the transmis- with Keyless Enter-N-Go in the ACC or ON/RUN sion into PARK, apply the parking brake, turn the mode.
Page 18: General Information
16 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE General Information SENTRY KEY The following regulatory statement applies to all Radio The Sentry Key Immobilizer system prevents unauthor- Frequency (RF) devices equipped in this vehicle: ized vehicle operation by disabling the engine. The system does not need to be armed or activated.
Page 19: Replacement Rke Key Fobs
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 17 After placing the ignition to the ON/RUN position, the CAUTION! (Continued) Vehicle Security Light will turn on for three seconds for a the immobilization system may result in a loss of bulb check. If the light remains on after the bulb check, it security protection.
Page 20: Customer Rke Key Fob Programming
18 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Customer RKE Key Fob Programming CAUTION! Programming RKE Key Fobs may be performed at an • Always remove the Key Fobs from the vehicle and authorized dealer. lock all doors when leaving the vehicle unattended. •...
Page 21: Vehicle Security Alarm
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19 VEHICLE SECURITY ALARM To Arm The System The Vehicle Security Alarm monitors the vehicle doors Follow these steps to arm the Vehicle Security Alarm: and trunk for unauthorized entry and the ignition switch 1.
Page 22: To Disarm The System
20 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Push the LOCK button on the exterior Passive Entry NOTE: Door Handle with a valid RKE Key Fob available in • The driver’s door key cylinder and the Trunk button the same exterior zone (refer to Keyless Enter-N-Go on the RKE Key Fob cannot arm or disarm the Vehicle —...
Page 23: Security System Manual Override
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 21 you are in the vehicle or not. If you remain in the vehicle ILLUMINATED ENTRY and open a door, the alarm will sound. If this occurs, The courtesy lights will turn on when you use the RKE disarm the Vehicle Security Alarm.
Page 24: Remote Keyless Entry (Rke)
22 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE REMOTE KEYLESS ENTRY (RKE) The RKE system allows you to lock or unlock the doors, open the trunk, or activate the Panic Alarm from dis- tances up to approximately 66 ft (20 m) using a hand-held Key Fob with RKE transmitter (RKE Key Fob).
Page 25: To Lock The Doors
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23 If the vehicle is equipped with Passive Entry, refer to Headlight Illumination On Approach “Keyless Enter-N-Go — Passive Entry” under “Things To This feature activates the headlights for up to 90 seconds Know Before Starting Your Vehicle”...
Page 26: To Unlatch The Trunk
24 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Sound Horn With Lock second and release. When the Panic Alarm is activated, the turn signals will flash, the horn will pulse on and off, This feature will cause the horn to chirp when the doors and the interior lights will turn on.
Page 27: Programming Additional Rke Key Fobs
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 25 Programming Additional RKE Key Fobs Programming RKE Key Fobs may be performed at an authorized dealer. RKE Key Fob Battery Replacement The recommended replacement battery is one CR2032 battery. NOTE: • Perchlorate Material — special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate •...
Page 28: General Information
26 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE new battery with your fingers. Skin oils may cause battery deterioration. If you touch a battery, clean it with rubbing alcohol. 4. To assemble the RKE Key Fob case, snap the two halves together, reposition and secure the screw as shown in step #2 for removal.
Page 29: Remote Starting System - If Equipped
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 27 NOTE: Changes or modifications not expressly approved How To Use Remote Start by the party responsible for compliance could void the All of the following conditions must be met before the user’s authority to operate the equipment. engine will remote start: REMOTE STARTING SYSTEM —...
Page 30: Remote Start Abort Message
28 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Remote Start Aborted — Trunk Open WARNING! • Remote Start Aborted — Fuel Low • Do not start or run an engine in a closed garage or • Remote Start Disabled — Start Vehicle To Reset confined area.
Page 31: To Exit Remote Start Mode Without Driving The Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 29 NOTE: To Exit Remote Start Mode Without Driving The Vehicle • If an engine fault is present, the vehicle will start and Push and release the REMOTE START button one time or then shut down 10 seconds later.
Page 32: Cancel Remote Start
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE NOTE: For vehicles equipped with the Keyless Enter- General Information N-Go — Ignition feature, the message “Remote start active The following regulatory statement applies to all Radio - Push start button” will display in the Driver Information Frequency (RF) devices equipped in this vehicle: Display (DID) until you push the START button.
Page 33: Door Locks
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31 DOOR LOCKS If the door lock knob is down when you shut the door, the door will lock. Therefore, make sure the Key Fob is Manual Door Locks not inside the vehicle before closing the door. To lock each door, push the door lock knob on each door trim panel downward.
Page 34: Power Door Locks
32 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Power Door Locks WARNING! (Continued) The power door lock switch is located on each door trim • When leaving the vehicle, always remove the key panel. Use this switch to lock or unlock the doors. from the ignition and lock your vehicle.
Page 35 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 33 The doors can also be locked and unlocked with the auto door lock feature can be enabled or disabled by your Keyless Enter-N-Go — Passive Entry system. Refer to authorized dealer. The auto door lock feature is enabled/ “Keyless Enter-N-Go —...
Page 36: Keyless Enter-N-Go - Passive Entry
34 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Automatic Unlock Doors On Exit Programming — NOTE: If Equipped • Passive Entry may be programmed ON/OFF; refer to “Uconnect Settings” in “Understanding Your Instru- The Automatic Unlock Doors On Exit feature can be ment Panel”...
Page 37 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 35 To Unlock From The Passenger Side: With a Passive Entry RKE Key Fob within 5 ft (1.5 m) of the passenger door handle, grab the front passenger door handle to unlock both doors automatically. The interior door panel lock knob will raise when the door is un- locked.
Page 38 36 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE FOBIK-Safe only executes in vehicles with passive entry. vehicle, and no valid Passive Entry RKE Key Fob is There are three situations that trigger a FOBIK-Safe detected outside the vehicle. The vehicle will not unlock search in any passive entry vehicle.
Page 39 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 37 To Lock The Vehicle’s Doors: With one of the vehicle’s Passive Entry RKE Key Fobs within 5 ft (1.5 m) of the driver or passenger front door handles, push the door handle LOCK button to lock both doors.
Page 40 38 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Do NOT grab the door handle, when pushing the door NOTE: handle button. This could unlock the door(s). • After pushing the door handle button, you must wait two seconds before you can lock or unlock the doors, using either Passive Entry door handle.
Page 41: General Information
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 39 General Information WINDOWS The following regulatory statement applies to all radio Power Windows frequency (RF) devices equipped in this vehicle: The window controls on the driver’s door control both of This device complies with Part 15 of the FCC Rules and the door windows.
Page 42: Auto-Down Feature - If Equipped
40 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE There is a single window control on the passenger’s door WARNING! trim panel that operates the window on the passenger’s door. The window controls will operate only when the Never leave children unattended in a vehicle, and do ignition switch is in the ON/RUN or ACC position.
Page 43: Trunk Lock And Release
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 41 To open the window part way, push the window switch NOTE: The transmission must be in PARK before the to the first detent and release it when you want the button will operate. If equipped with a manual transmis- window to stop.
Page 44: Trunk Safety Warning
42 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE With the ignition switch in the ON/RUN position, the TRUNK SAFETY WARNING Trunk Open symbol will display in the instrument cluster indicating that the trunk is open. The odometer display WARNING! will reappear once the trunk is closed. Do not allow children to have access to the trunk, With the ignition switch in the OFF position or the key either by climbing into the trunk from outside, or...
Page 45: Occupant Restraint Systems
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 43 In the event of an individual being locked inside the OCCUPANT RESTRAINT SYSTEMS trunk, the trunk can be opened by actuating the glow-in- Some of the most important safety features in your the-dark handle attached to the trunk latching mecha- vehicle are the restraint systems: nism.
Page 46 44 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Here are some simple steps you can take to minimize the 5. You should read the instructions provided with your risk of harm from a deploying air bag: child restraint to make sure that you are using it properly.
Page 47: Seat Belt Systems
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 45 from the vehicle. Seat belts reduce the possibility of WARNING! ejection and the risk of injury caused by striking the • Never place a rear-facing child restraint in front of inside of the vehicle. Everyone in a motor vehicle should be belted at all times.
Page 48 46 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE ignition switch is first turned to the START or ON/RUN driver and occupied outboard front seat passenger seat position the Seat Belt Reminder Light will turn on and belts are buckled. The driver should instruct all occu- remain on until both outboard front seat belts are buck- pants to buckle their seat belts.
Page 49 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 47 BeltAlert can be activated or deactivated by your autho- will lock and reduce your risk of striking the inside of the rized dealer. FCA US LLC does not recommend deacti- vehicle or being thrown out of the vehicle. vating BeltAlert.
Page 50 48 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! (Continued) WARNING! (Continued) • It is dangerous to ride in a cargo area, inside or • Two people should never be belted into a single outside of a vehicle. In a collision, people riding in seat belt.
Page 51 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 49 WARNING! (Continued) WARNING! (Continued) • A seat belt that is buckled into the wrong buckle bones. Wear the seat belt over your shoulder so that will not protect you properly. The lap portion could your strongest bones will take the force in a colli- ride too high on your body, possibly causing inter- sion.
Page 52 50 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door. Sit back and adjust the seat. 2. The seat belt latch plate is above the back of the front seat, and next to your arm in the rear seat (for vehicles equipped with a rear seat).
Page 53 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 51 Inserting Latch Plate Into Buckle Positioning The Lap Belt 4. Position the lap belt so that it is snug and lies low 5. Position the shoulder belt across the shoulder and across your hips, below your abdomen. To remove chest with minimal, if any slack so that it is comfort- slack in the lap belt portion, pull up on the shoulder able and not resting on your neck.
Page 54 52 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 6. To release the belt, push the red button on the buckle. 3. Slide the latch plate upward over the folded webbing. The seat belt will automatically retract to its stowed The folded webbing must enter the slot at the top of position.
Page 55 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 53 Seat Belts And Pregnant Women WARNING! • ONLY use a Seat Belt Extender if it is physically required in order to properly fit the original seat belt system. DO NOT USE the Seat Belt Extender if, when worn, the distance between the front edge of the Seat Belt Extender buckle and the center of the occupant’s body is LESS than 6 inches.
Page 56 54 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Position the lap belt snug and low below the abdomen The pretensioners are triggered by the Occupant Re- and across the strong bones of the hips. Place the straint Controller (ORC). Like the air bags, the preten- shoulder belt across the chest and away from the neck.
Page 57 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 55 retract completely in this case and then carefully pull out only the amount of webbing necessary to comfortably wrap around the occupant’s mid-section. Slide the latch plate into the buckle until you hear a click. In Automatic Locking Mode, the shoulder belt is auto- matically pre-locked.
Page 58 56 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Mode and activate the vehicle sensitive (emergency) WARNING! (Continued) locking mode. 12 years or younger, including a child in a rear- facing child restraint. WARNING! • Only use a rear-facing child restraint in a vehicle •...
Page 59: Supplemental Restraint System (Srs)
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 57 • Seat Belt Pretensioners Supplemental Restraint System (SRS) • Seat Belt Buckle Switch Air Bag System Components • Seat Track Position Sensors Your vehicle may be equipped with the following air bag system components: Advanced Front Air Bags •...
Page 60 58 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE WARNING! • Being too close to the steering wheel or instrument panel during Advanced Front Air Bag deployment could cause serious injury, including death. Air bags need room to inflate. Sit back, comfortably extending your arms to reach the steering wheel or instrument panel.
Page 61 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 59 Advanced Front Air Bag Features WARNING! The Advanced Front Air Bag system has multistage • No objects should be placed over or near the air driver and front passenger air bags. This system provides bag on the instrument panel or steering wheel output appropriate to the severity and type of collision as because any such objects could cause harm if the...
Page 62 60 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Advanced Front Air Bag Operation Seat belts are necessary for your protection in all colli- sions, and also are needed to help keep you in position, Advanced Front Air Bags are designed to provide addi- away from an inflating air bag.
Page 63 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 61 WARNING! • Do not drill, cut, or tamper with the knee impact bolsters in any way • Do not mount any accessories to the knee impact bolsters such as alarm lights, stereos, citizen band radios, etc.
Page 64 62 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE When the SAB deploys, it opens the seam on the out- 2. Supplemental Side Air Bag Inflatable Curtains board side of the seatback’s trim cover. The inflating SAB (SABICs): Located above the side windows. The trim deploys through the seat seam into the space between the covering the SABICs is labeled “SRS AIRBAG”...
Page 65 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 63 SABICs may help reduce the risk of head or other injuries WARNING! to front and rear seat outboard occupants in certain side • Your vehicle is equipped with left and right impacts and/or vehicle rollover events, in addition to the injury reduction potential provided by the seat belts and Supplemental Side Air Bag Inflatable Curtains body structure.
Page 66 64 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE The SABICs and SABs (“Side Air Bags”) are designed to Bags. To get the best protection from the Side Air Bags, activate in certain side impacts and certain rollover occupants must wear their seat belts properly and sit events.
Page 67 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 65 The Side Air Bags will not deploy in all side collisions, WARNING! (Continued) including some collisions at certain angles, or some side In some collisions, Side Air Bags won’t deploy at all. collisions that do not impact the area of the passenger Always wear your seat belt even though you have compartment.
Page 68 66 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE A faster-developing event may deploy the seat belt deploy and unfold. The abrasions are similar to fric- pretensioners as well as the Side Air Bags on both sides of tion rope burns or those you might get sliding along a the vehicle.
Page 69 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 67 Do not drive your vehicle after the air bags have de- Enhanced Accident Response System ployed. If you are involved in another collision, the air In the event of an impact, if the communication network bags will not be in place to protect you.
Page 70 68 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Enhanced Accident Response System Reset the OFF position or in the ACC position, the air bag Procedure system is not on and the air bags will not inflate. In order to reset the Enhanced Accident Response System The ORC contains a backup power supply system that functions after an event, the ignition switch must be may deploy the air bags even if the battery loses power or...
Page 71 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 69 While the air bag system is designed to be maintenance WARNING! free, if any of the following occurs, have an authorized Ignoring the Air Bag Warning Light in your instru- dealer service the air bag system immediately. ment panel could mean you won’t have the air bags •...
Page 72 70 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE If the Redundant Air Bag Warning Light comes on WARNING! (Continued) intermittently or remains on while driving have an • It is dangerous to try to repair any part of the air authorized dealer service the vehicle immediately.
Page 73 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 71 Event Data Recorder (EDR) These data can help provide a better understanding of the circumstances in which crashes and injuries occur. This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in NOTE: EDR data are recorded by your vehicle only if a certain crash or near crash-like situations, such as an air non-trivial crash situation occurs;...
Page 74: Child Restraints
72 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Child Restraints WARNING! (Continued) Everyone in your vehicle needs to be buckled up at all great that you could not hold the child, no matter times, including babies and children. how strong you are. The child and others could be badly injured.
Page 75 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 73 • Canadian residents should refer to Transport Canada’s NOTE: website for additional information: www.tc.gc.ca/eng/ • For additional information, refer to www.seatcheck.org motorvehiclesafety/safedrivers-childsafety-index-53.htm or call 1-866-732-8243. Summary Of Recommendations For Restraining Children In Vehicles Child Size, Height, Weight Or Age Recommended Type Of Child Restraint Infants and Toddlers...
Page 76 74 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Child Size, Height, Weight Or Age Recommended Type Of Child Restraint Larger Children Children who have out-grown their Belt Positioning Booster Seat and the forward-facing child restraint, but are vehicle seat belt, seated in the rear seat too small to properly fit the vehicle’s of the vehicle seat belt...
Page 77 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75 remain in a forward-facing child seat with a harness for WARNING! as long as possible, up to the highest weight or height • Never place a rear-facing child restraint in front of allowed by the child seat.
Page 78 76 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Children Too Large For Booster Seats WARNING! (Continued) Children who are large enough to wear the shoulder belt killed. Follow the child restraint manufacturer’s comfortably, and whose legs are long enough to bend directions exactly when installing an infant or over the front of the seat when their back is against the child restraint.
Page 79 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 77 4. Is the lap part of the belt as low as possible, touching WARNING! the child’s thighs and not their stomach? Never allow a child to put the shoulder belt under an 5.
Page 80 78 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Recommendations For Attaching Child Restraints Restraint Type Combined Use any attachment method shown with an “X” Below Weight of the LATCH – Seat Belt Only LATCH – Seat Belt + Top Child + Child Lower Anchors Lower Anchors Tether Anchor...
Page 81 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 79 Lower Anchors And Tethers For CHildren Your vehicle is equipped with the child restraint anchor- (LATCH) Restraint System age system called LATCH, which stands for Lower Anchors and Tethers for CHildren. The LATCH system has three vehicle anchor points for installing LATCH- equipped child seats.
Page 82 80 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE LATCH Positions For Installing Child Restraints In This Vehicle • Lower Anchorage Symbol 2 anchorages per seating position • Top Tether Anchorage Symbol...
Page 83 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81 Frequently Asked Questions About Installing Child Restraints With LATCH What is the weight limit (child’s weight 65 lbs (29.5 kg) Use the LATCH anchorage system until + weight of the child restraint) for using the combined weight of the child and the the LATCH anchorage system to attach child restraint is 65 lbs (29.5 kg).
Page 84 82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Frequently Asked Questions About Installing Child Restraints With LATCH Can two child restraints be attached Never “share” a LATCH anchorage with using a common lower LATCH two or more child restraints. If the center anchorage? position does not have dedicated LATCH lower anchorages, use the seat belt to...
Page 85 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 83 Locating LATCH Anchorages The lower anchorages are round bars that are found at the rear of the seat cushion where it meets the seatback, below the anchorage sym- bols on the seatback. They are just visible when you lean into the rear seat to install the child restraint.
Page 86 84 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Locating Tether Anchorages There are tether strap anchorages behind each rear seating position located in the panel be- tween the rear seatback and the rear window. They are found under a plastic cover with the tether anchorage symbol on it.
Page 87 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 85 tether strap. The tether strap will have a hook at the end Always follow the directions of the child restraint to attach to the top tether anchorage and a way to tighten manufacturer when installing your child restraint.
Page 88 86 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE restraint to get a better fit. If the rear seat can be moved 6. Test that the child restraint is installed tightly by forward and rearward in the vehicle, you may wish to pulling back and forth on the child seat at the belt move it to its rear-most position to make room for the path.
Page 89 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 87 the seat belt. Remind all children in the vehicle that the Installing Child Restraints Using The Vehicle Seat seat belts are not toys and that they should not play with Belt them. The seat belts in the passenger seating positions are equipped with a Switchable Automatic Locking Retractor WARNING!
Page 90 88 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Lap/Shoulder Belt Systems for Installing Child Restraints in this Vehicle • ALR = Switchable Automatic Locking Retractor • Top Tether Anchorage Symbol...
Page 91 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 89 Frequently Asked Questions About Installing Child Restraints With Seat Belts What is the weight limit (child’s Weight limit of the Always use the tether anchor when weight + weight of the child re- Child Restraint using the seat belt to install a for- straint) for using the Tether Anchor...
Page 92 90 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Installing A Child Restraint With A Switchable 4. Pull on the webbing to make the lap portion tight Automatic Locking Retractor (ALR) against the child seat. 1. Place the child seat in the center of the seating 5.
Page 93 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 91 8. If the child restraint has a top tether strap and the Installing Child Restraints Using The Top Tether seating position has a top tether anchorage, connect Anchorage the tether strap to the anchorage and tighten the tether WARNING! strap.
Page 94 92 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 1. Look behind the seating position where you plan to install the child restraint to find the tether anchorage. You may need to move the seat forward to provide better access to the tether anchorage.
Page 95: Transporting Pets
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 93 4. Attach the tether strap hook of the child restraint to Transporting Pets the top tether anchorage as shown in the diagram. Air Bags deploying in the front seat could harm your pet. An unrestrained pet will be thrown about and possibly 5.
Page 96 94 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE • Depress the accelerator pedal slowly and not more It is recommended for the operator to observe the follow- ing driving behaviors during the new vehicle break-in than halfway to avoid rapid acceleration in lower period: gears (1st to 3rd gears).
Page 97: Safety Tips
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 95 483 to 805 km (300 to 500 miles): SAFETY TIPS • Exercise the full engine rpm range, shifting manually Transporting Passengers (paddles or gear shift) at higher rpms when possible. NEVER TRANSPORT PASSENGERS IN THE CARGO •...
Page 98: Exhaust Gas
96 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Exhaust Gas WARNING! (Continued) • If it is necessary to sit in a parked vehicle with the WARNING! engine running, adjust your heating or cooling Exhaust gases can injure or kill. They contain carbon controls to force outside air into the vehicle.
Page 99: Safety Checks You Should Make Inside The Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 97 Safety Checks You Should Make Inside The during starting, stays on, or turns on while driving, Vehicle have the system inspected at an authorized dealer as soon as possible. This light will illuminate with a Seat Belts single chime when a fault with the Air Bag Warning Inspect the seat belt system periodically, checking for...
Page 100 98 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Floor Mat Safety Information WARNING! (Continued) Always use floor mats designed to fit the footwell of your secured to prevent them from moving and interfer- vehicle. Use only floor mats that leave the pedal area ing with the pedals or the ability to control the unobstructed and that are firmly secured so that they vehicle.
Page 101: Periodic Safety Checks You Should Make Outside The Vehicle
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 99 Lights WARNING! (Continued) Have someone observe the operation of brake lights and • If required, mounting posts must be properly in- exterior lights while you work the controls. Check turn stalled, if not equipped from the factory. signal and high beam indicator lights on the instrument Failure to properly follow floor mat installation or panel.
Page 103 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CONTENTS MIRRORS ......106 BLIND SPOT MONITORING (BSM) — IF EQUIPPED.
Page 104 102 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Manual Front Seatback Recline ...132 ▫ Lights-On Reminder ....144 ▫...
Page 105 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 103 ▫ Rain Sensing Wipers — If Equipped ..151 ADAPTIVE CRUISE CONTROL (ACC) — IF EQUIPPED ......160 MANUAL TILT/TELESCOPING STEERING ▫...
Page 106 104 UNDERSTANDING THE FEATURES OF YOUR VEHICLE ▫ Display Warnings And Maintenance ..174 ▫ ParkSense Warning Display ....189 ▫ Precautions While Driving With ACC ..176 ▫...
Page 107 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 105 ▫ Programming A Rolling Code ... . .203 ▫ Venting Sunroof — Express ....212 ▫...
Page 108: Mirrors
106 UNDERSTANDING THE FEATURES OF YOUR VEHICLE MIRRORS Automatic Dimming Mirror — If Equipped The mirror head can be adjusted up, down, left, and right for various drivers. The mirror should be adjusted to center on the view through the rear window. This mirror automatically adjusts for headlight glare from vehicles behind you.
Page 109 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 107 ASSIST Call WARNING! The ASSIST Button is used to automatically connect you ALWAYS obey traffic laws and pay attention to the to any one of the following support centers: road. Some Uconnect Access services, including 9-1-1 •...
Page 110 108 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 9-1-1 Call 3. Once a connection between the vehicle and a 9-1-1 operator is made, the 9-1-1 Call system may transmit 1. Push the 9-1-1 Call button on the Rearview Mirror. the following important vehicle information to a 9-1-1 NOTE: In case the 9-1-1 Call button is pushed in error, operator: there will be a 10 second delay before the 9-1-1 Call...
Page 111 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109 NOTE: WARNING! • Your vehicle may be transmitting data as authorized • If anyone in the vehicle could be in danger (e.g., by the subscriber. fire or smoke is visible, dangerous road conditions •...
Page 112 110 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 9-1-1 Call System Limitations WARNING! (Continued) Vehicles sold in Canada and Mexico DO NOT have 9-1-1 equipment to the vehicle’s electrical system. This Call system capabilities. may prevent your vehicle from sending a signal to initiate an emergency call.
Page 113 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 111 • The vehicle’s electrical systems are not intact. WARNING! • The 9-1-1 Call system software and/or hardware are • Ignoring the Rearview Mirror light could mean you damaged during a crash. will not have 9-1-1 Call services. If the Rearview •...
Page 114 112 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information WARNING! This device complies with Part 15 of the FCC Rules. ALWAYS obey traffic laws and pay attention to the Operation is subject to the following two conditions: (1) road. Some Uconnect Access services, including 9-1-1 This device may not cause harmful interference, and (2) and Assist, will NOT work without an operable 1X this device must accept any interference received, includ-...
Page 115: Outside Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 113 Outside Mirrors Outside Mirrors Folding Feature To receive maximum benefit, adjust the outside mirror(s) The mirrors are equipped with a rotational hinge. The to center on the adjacent lane of traffic and a slight mirrors have one detent (clockwise) towards the rear of overlap of the view obtained from the inside mirror.
Page 116: Power Mirrors
114 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Mirrors The power mirror controls consist of mirror select but- tons and a four-way mirror control switch. To adjust a The power mirror controls are located on the driver-side mirror, push either the L (left) or R (right) to select the door trim panel.
Page 117: Vanity Mirrors
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 115 Vanity Mirrors A vanity mirror is located on the sun visor. To use the mirror, rotate the sun visor downward and swing the mirror cover upward. Illuminated Vanity Mirrors An illuminated vanity mirror is on the sun visor. To use the mirror, rotate the sun visor downward and swing the mirror cover upward.
Page 118: Slide-On-Rod" And Extender Features Of Sun Visor
116 UNDERSTANDING THE FEATURES OF YOUR VEHICLE “Slide-On-Rod” And Extender Features Of Sun Visor To use the “Slide-On-Rod” feature of the sun visor, rotate the sun visor downward and swing the sun visor so it is parallel to the side window, grabbing the sun visor with your left hand pull rearwards until the sun visor is in the desired position.
Page 119: Blind Spot Monitoring (Bsm) - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 117 BLIND SPOT MONITORING (BSM) — IF EQUIPPED The Blind Spot Monitoring (BSM) system uses two radar- based sensors, located inside the rear bumper fascia, to detect highway licensable vehicles (automobiles, trucks, motorcycles, etc.) that enter the blind spot zones from the rear/front/side of the vehicle.
Page 120 118 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Automatic Transmission Vehicles The BSM system sensors operate when the vehicle is in any forward gear or REVERSE and enters stand-by mode when the vehicle is in PARK. Manual Transmission Vehicles The BSM system sensors operate when the vehicle is in any gear and enters stand-by mode when the Park Brake is engaged, the vehicle is not in REVERSE, and the vehicle is stationary.
Page 121 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 119 both sides of the vehicle when the vehicle speed reaches The area on the rear fascia where the radar sensors are approximately 6 mph (10 km/h) or higher and will alert located must remain free of snow, ice, and dirt/road the driver of vehicles in these areas.
Page 122 120 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Entering From The Side Entering From The Rear Vehicles that move into your adjacent lanes from either Vehicles that come up from behind your vehicle on either side of the vehicle. side and enter the rear detection zone with a relative speed of less than 30 mph (48 km/h).
Page 123 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 121 Overtaking Traffic The BSM system is designed not to issue an alert on stationary objects such as guardrails, posts, walls, foliage, If you pass another vehicle slowly (with a relative speed berms, etc. However, occasionally the system may alert of less than 10 mph (16 km/h) and the vehicle remains in on such objects.
Page 124 122 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The BSM system will not alert you of objects that are traveling in the opposite direction of the vehicle in adjacent lanes. Opposing Traffic WARNING! Stationary Objects The Blind Spot Monitoring system is only an aid to help detect objects in the blind spot zones.
Page 125: Rear Cross Path - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 123 WARNING! (Continued) system is not designed to detect pedestrians, bicy- clists, or animals. Even if your vehicle is equipped with the BSM system, always check your vehicle’s mirrors, glance over your shoulder, and use your turn signal before changing lanes.
Page 126: Modes Of Operation
124 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: In a parking lot situation, oncoming vehicles can Modes Of Operation be obscured by vehicles parked on either side. If the Three selectable modes of operation are available in the sensors are blocked by other structures or vehicles, the Uconnect System.
Page 127 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 125 Blind Spot Alert Lights/Chime When the system is in RCP, the system shall respond with both visual and audible alerts when a detected object is When operating in Blind Spot Alert Lights/Chime mode, present.
Page 128: General Information
126 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information SEATS This vehicle has systems that operate on radio frequency Seats are a part of the Occupant Restraint System of the that comply with Part 15 of the Federal Communications vehicle. Commission (FCC) rules and with Industry Canada Standards RSS- GEN/210/220/310.
Page 129: Power Seats
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 127 Power Seats Adjusting The Seat Forward Or Rearward The power seat switches are located on the outboard side The seat can be adjusted both forward and rearward. of the front seat cushions. The power seat switches are Push the seat switch forward or rearward.
Page 130 128 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power Lumbar — If Equipped Vehicles equipped with power driver or passenger seats are also equipped with power lumbar. The power lumbar switch is located on the outboard side of the power seat. Push the switch forward to increase the lumbar support.
Page 131: Front Heated Seats - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 129 WARNING! (Continued) CAUTION! (Continued) control which could cause a collision and serious the seat controls. Seat travel may become limited if injury or death. movement is stopped by an obstruction in the seat’s •...
Page 132 130 UNDERSTANDING THE FEATURES OF YOUR VEHICLE If the HI-level setting is selected, the system will auto- WARNING! matically switch to LO-level after approximately 60 min- • Persons who are unable to feel pain to the skin utes of continuous operation. At that time, the display will change from HI to LO, indicating the change.
Page 133: Front Ventilated Seats - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 131 Front Ventilated Seats — If Equipped NOTE: The engine must be running for the ventilated seats to operate. Located in the seat cushion and seat back are fans that draw the air from the passenger compartment and move Vehicles Equipped With Remote Start air through fine perforations in the seat cover to help On models that are equipped with remote start, the...
Page 134: Manual Front Seatback Recline
132 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked.
Page 135: Passenger Seat Easy Entry
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 133 WARNING! Do not ride with the seatback reclined so that the shoulder belt is no longer resting against your chest. In a collision you could slide under the seat belt, which could result in serious injury or death. Passenger Seat Easy Entry On the passenger seat, pull forward on the lever located on the side of the seatback in order to dump the seatback...
Page 136: Head Restraints
134 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Head Restraints NOTE: Do not reverse the head restraints (making the rear of the head restraint face forward) in an attempt to Head restraints are designed to reduce the risk of injury gain additional clearance to the back of your head. by restricting head movement in the event of a rear impact.
Page 137 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 135 To raise the head restraint, pull upward on the head restraint. To lower the head restraint, push the adjust- ment button located at the base of the head restraint and push downward on the head restraint. To remove the head restraint, remove the seat belt from the seat belt loop.
Page 138: Folding Rear Seat
136 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Folding Rear Seat WARNING! (Continued) The rear seatbacks can be folded forward to provide an stow removed head restraints in a location outside additional storage area. Pull on the loops located on the the occupant compartment.
Page 139 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 137 Folding Rear Seatback Loop Folded Rear Seat When the seatback is folded to the upright position, make sure it is latched by strongly pulling on the top of the seatback above the seat strap.
Page 140: To Open And Close The Hood
138 UNDERSTANDING THE FEATURES OF YOUR VEHICLE TO OPEN AND CLOSE THE HOOD WARNING! Two latches must be released to open the hood. • Be certain that the seatback is securely locked into 1. Pull the hood release lever located under the left side position.
Page 141 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 139 2. Move to the outside of the vehicle, the safety catch is located under the center front edge of the hood. Hood Safety Catch CAUTION! Hood Safety Catch Location To prevent possible damage, do not slam the hood to 3.
Page 142: Lights
140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE operation of the headlights, parking lights, instrument CAUTION! (Continued) panel lights, instrument panel light dimming, and inte- closed for both latches. Never drive vehicle unless rior lights. hood is fully closed, with both latches engaged. WARNING! Be sure the hood is fully latched before driving your vehicle.
Page 143: Automatic Headlights - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 141 Rotate the headlight switch clockwise to the first detent Headlights On With Wipers (Available With for parking light and instrument panel light operation. Automatic Headlights Only) Rotate the headlight switch to the second detent for When this feature is active, the headlights will turn on headlight, parking light and instrument panel light op- after the wipers are turned on if the headlight switch is...
Page 144 142 UNDERSTANDING THE FEATURES OF YOUR VEHICLE mounted on the inside rearview mirror. This camera Sensitivity Control (not recommended), toggle high- detects vehicle specific light and automatically switches beam lever 6 full on/off cycles within 10 seconds of from high beams to low beams until the approaching ignition ON.
Page 145: Headlight Time Delay
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143 To Deactivate NOTE: The lights must be turned off within 45 seconds of turning the ignition OFF to activate this feature. 1. Pull the multifunction lever toward you (or rearward If you turn the headlights, park lights or ignition switch in vehicle) to manually deactivate the system (normal ON again, the system will cancel the delay.
Page 146: Lights-On Reminder
144 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: If allowed by law in the country in which the vehicle was purchased the Daytime Running Lights can be turned on and off using the Uconnect System, refer to “Uconnect Settings” in “Understanding Your Instrument Panel”...
Page 147: Lane Change Assist
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 145 NOTE: High/Low Beam Switch • If either light remains on and does not flash, or there is Push the multifunction lever away from you to switch the headlights to high beam. Pull the multifunction lever a very fast flash rate, check for a defective outside light toward you to switch the headlights back to low beam.
Page 148: Interior Lights
146 UNDERSTANDING THE FEATURES OF YOUR VEHICLE These lights also turn on when a door is opened, or when Interior Lights the UNLOCK button on the Remote Keyless Entry (RKE) The interior lights come on when a door is opened. Key Fob is pushed, or when the dimmer control is turned To protect the battery, the interior lights will turn off fully upward, past the second detent.
Page 149 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 147 Dimmer Controls With the parking lights or headlights on, rotating the left dimmer control upward will increase the brightness of The dimmer control is part of the headlight switch and is the instrument panel lights and lighted cupholders (if located on the left side of the instrument panel.
Page 150: Windshield Wipers And Washers
148 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Dome Light Position WINDSHIELD WIPERS AND WASHERS Rotate the left dimmer control completely upward to the The multifunction lever operates the windshield second detent to turn on the interior lights. The interior wipers and washer when the ignition is placed in lights will remain on when the dimmer control is in this the ON/RUN or ACC position.
Page 151: Intermittent Wiper System
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 149 Rotate the end of the multifunction lever to the first are four delay settings, which allow you to regulate the detent past the intermittent settings for low-speed wiper wipe interval from a minimum of one cycle every second operation, or to the second detent past the intermittent to a maximum of approximately 36 seconds between settings for high-speed wiper operation.
Page 152: Windshield Washers
150 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Windshield Washers WARNING! (Continued) To use the washer, push the multifunction lever inward vehicles or other obstacles. To avoid sudden icing of (toward the steering column) and hold it for as long as the windshield during freezing weather, warm the washer spray is desired.
Page 153: Rain Sensing Wipers - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 151 ON, and the front wipers complete a minimum of 5 wipe The sensitivity of the system can be adjusted with the cycles within 60 seconds. multifunction lever. Wiper delay position 1 is the least sensitive, and wiper delay position 4 is the most sensi- In this case (auto wipes) the headlights will turn off if no tive.
Page 154: Manual Tilt/Telescoping Steering Column
152 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The Rain Sensing system has protection features for the MANUAL TILT/TELESCOPING STEERING COLUMN wiper blades and arms, and will not operate under the This feature allows you to tilt the steering column following conditions: upward or downward.
Page 155: Power Tilt/Telescoping Steering Column - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 153 To unlock the steering column, pull the lever downward. POWER TILT/TELESCOPING STEERING COLUMN To tilt the steering column, move the steering wheel — IF EQUIPPED upward or downward as desired. To lengthen or shorten This feature allows you to tilt the steering column the steering column, pull the steering wheel outward or upward or downward.
Page 156: Heated Steering Wheel - If Equipped
154 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To tilt the steering column, move the lever up or down as steering wheel has been turned on it can operate for up to desired. To lengthen or shorten the steering column, pull 100 minutes before automatically shutting off.
Page 157: Electronic Speed Control - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 155 Vehicles Equipped With Remote Start WARNING! (Continued) On models that are equipped with remote start, the • Do not place anything on the steering wheel that heated steering wheel can be programmed to come on insulates against heat, such as a blanket or steering during a remote start through the Uconnect system.
Page 158: To Activate
156 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: In order to ensure proper operation, the Elec- tronic Speed Control System has been designed to shut down if multiple Speed Control functions are operated at the same time. If this occurs, the Electronic Speed Control System can be reactivated by pushing the Electronic Speed Control ON/OFF button and resetting the desired vehicle set speed.
Page 159: To Set A Desired Speed
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 157 To Deactivate WARNING! A soft tap on the brake pedal, pushing the CANCEL Leaving the Electronic Speed Control system on button, or normal brake pressure while slowing the when not in use is dangerous. You could accidentally vehicle will deactivate the Electronic Speed Control with- set the system or cause it to go faster than you want.
Page 160 158 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • If the button is continually pushed, the set speed will The drivers preferred units can be selected through the instrument panel settings if equipped. Refer to “Under- continue to increase until the button is released, then standing Your Instrument Panel”...
Page 161: To Accelerate For Passing
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 159 • If the button is continually pushed, the set speed will NOTE: The Electronic Speed Control system maintains continue to decrease until the button is released, then speed up and down hills. A slight speed change on the new set speed will be established.
Page 162: Understanding The Features Of Your Vehicle
160 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • If the ACC sensor detects a vehicle ahead, ACC will ADAPTIVE CRUISE CONTROL (ACC) — IF EQUIPPED apply limited braking or acceleration (not to exceed the original set speed) automatically to maintain a Adaptive Cruise Control (ACC) increases the driving preset following distance, while matching the speed of convenience provided by cruise control while traveling...
Page 163 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 161 You can change the mode by using the Cruise Control WARNING! (Continued) buttons. The two control modes function differently. • The ACC system: Always confirm which mode is selected. • Does not react to pedestrians, oncoming vehicles, and stationary objects (e.g., a stopped vehicle in a WARNING! traffic jam or a disabled vehicle).
Page 164: Adaptive Cruise Control (Acc) Operation
162 UNDERSTANDING THE FEATURES OF YOUR VEHICLE WARNING! (Continued) • When entering a turn lane or highway off ramp; when driving on roads that are winding, icy, snow- covered, slippery, or have steep uphill or downhill slopes. • When towing a trailer up or down steep slopes. •...
Page 165: Activating Adaptive Cruise Control (Acc)
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 163 NOTE: Any chassis/suspension or tire size modifications When the system is OFF, the DID displays “Adaptive to the vehicle will effect the performance of the Adaptive Cruise Control (ACC) Off.” Cruise Control and Forward Collision Warning System. NOTE: You cannot engage ACC under the following Activating Adaptive Cruise Control (ACC) conditions:...
Page 166: To Activate/Deactivate
164 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Activate/Deactivate To turn the system OFF, push and release the Adaptive Cruise Control (ACC) ON/OFF button again. At this Push and release the Adaptive Cruise Control (ACC) time, the system will turn off and the DID will display ON/OFF button.
Page 167: To Set A Desired Acc Speed
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 165 Remove your foot from the accelerator pedal. If you do WARNING! not, the vehicle may continue to accelerate beyond the set speed. If this occurs: Leaving the Adaptive Cruise Control (ACC) system on when not in use is dangerous. You could acciden- •...
Page 168: To Turn Off
166 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The gear selector is removed from the Drive position. To Resume • The Electronic Stability Control/Traction Control Sys- If there is a set speed in memory push the RES (resume) button and then remove your foot from the accelerator tem (ESC/TCS) activates.
Page 169: To Vary The Speed Setting
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 167 • If the button is continually pushed, the set speed will To Vary The Speed Setting continue to increase in 5 mph increments until the To Increase Speed button is released. The increase in set speed is reflected While ACC is set, you can increase the set speed by in the DID.
Page 170 168 UNDERSTANDING THE FEATURES OF YOUR VEHICLE To Decrease Speed Metric Speed (km/h) • Pushing the SET - button once will result in a 1 km/h While ACC is set, the set speed can be decreased by pushing the SET - button. decrease in set speed.
Page 171: Setting The Following Distance In Acc
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 169 • The ACC system applies the brake down to 15 mph (24 km/h) when following a target vehicle. • The ACC system maintains set speed when driving up hill and down hill. However, a slight speed change on moderate hills is normal.
Page 172 170 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Distance Setting 3 Bars (Long) Distance Setting 2 Bars (Medium)
Page 173 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 171 To increase the distance setting, push the Distance Setting — Increase button and release. Each time the button is pushed, the distance setting increases by one bar (longer). To decrease the distance setting, push the Distance Set- ting —...
Page 174 172 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The vehicle will then maintain the set distance until: maintain the set distance. If this occurs, a visual alert “BRAKE” will flash in the DID and a chime will sound • The vehicle ahead accelerates to a speed above the set while ACC continues to apply its maximum braking speed.
Page 175: Overtake Aid
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 173 NOTE: The “Brake!” Screen in the DID is a warning for Push the ADAPTIVE CRUISE CONTROL (ACC) ON/ the driver to take action and does not necessarily mean OFF button (located on the steering wheel) until one of that the Forward Collision Warning system is applying the following displays in the DID: the brakes autonomously.
Page 176: Display Warnings And Maintenance
174 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The ACC screen may display once again if any ACC This most often occurs at times of poor visibility, such as activity occurs, which may include any of the following: in snow or heavy rain. The ACC system may also become temporarily blinded due to obstructions, such as mud, •...
Page 177 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 175 If weather conditions are not a factor, the driver should When the condition that deactivated the system is no examine the sensor. It may require cleaning or removal of longer present, the system will return to the “Adaptive an obstruction.
Page 178: Precautions While Driving With Acc
176 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Service ACC/FCW Warning Towing A Trailer If the system turns off, and the DID displays “ACC/FCW Towing a trailer is not advised when using ACC. Unavailable Service Required” or “Cruise/FCW Unavail- Offset Driving able Service Required”, there may be an internal system ACC may not detect a vehicle in the same lane that is fault or a temporary malfunction that limits ACC func-...
Page 179 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177 the vehicle is out of the curve the system will resume your original Set Speed. This is a part of normal ACC system functionality. NOTE: On tight turns ACC performance may be limited. Offset Driving Condition Example Turns And Bends When driving on a curve with ACC engaged, the system...
Page 180 178 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Using ACC On Hills Lane Changing When driving on hills, ACC may not detect a vehicle in ACC may not detect a vehicle until it is completely in the your lane. Depending on the speed, vehicle load, traffic lane in which you are traveling.
Page 181 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 179 Narrow Vehicles Some narrow vehicles traveling near the outer edges of the lane or edging into the lane are not detected until they have moved fully into the lane. There may not be sufficient distance to the vehicle ahead.
Page 182: General Information
180 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Stationary Objects And Vehicles General Information ACC does not react to stationary objects and stationary This vehicle has systems that operate on radio frequency vehicles. For example, ACC will not react in situations that comply with Part 15 of the Federal Communications where the vehicle you are following exits your lane and Commission (FCC) rules and with Industry Canada...
Page 183: Normal (Fixed Speed) Electronic Speed Control Mode
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 181 Normal (Fixed Speed) Electronic Speed Control WARNING! Mode In the normal Cruise Control mode, the system will In addition to Adaptive Cruise Control mode, a Normal not react to vehicles ahead. In addition, the proximity (Fixed Speed) Electronic Speed Control mode is available warning does not activate and no alarm will sound for cruising at fixed speeds.
Page 184 182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Once a speed has been set a message (CRUISE CON- U.S. Speed (mph) TROL SET TO MPH/KM) will appear indicating what • Pushing the SET + button once will result in a 1 mph speed was set.
Page 185 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 183 To Decrease Speed Metric Speed (km/h) • Pushing the SET - button once will result in a 1 km/h When the Normal (Fixed Speed) Cruise Control is set, you can decrease speed by pushing the SET - button. decrease in set speed.
Page 186 184 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • The Electronic Stability Control/Traction Control Sys- To Turn Off tem (ESC/TCS) activates. The system will turn off and erase the set speed in • The vehicle parking brake is applied. memory if: •...
Page 187: Forward Collision Warning (Fcw) - If Equipped
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 185 FORWARD COLLISION WARNING (FCW) — IF EQUIPPED Forward Collision Warning (FCW) Operation The Forward Collision Warning (FCW) system provides the driver with audible warnings, visual warnings (within the DID), to warn the driver when it detects a potential frontal collision.
Page 188: Turning Fcw On Or Off
186 UNDERSTANDING THE FEATURES OF YOUR VEHICLE NOTE: WARNING! (Continued) • The minimum speed for FCW activation is 5 mph responsibility to avoid a collision by controlling the (10 km/h). vehicle via braking and steering. Failure to follow this warning could lead to serious injury or death. •...
Page 189: Changing Fcw Status
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 187 Changing the FCW status to “Off” prevents the system Changing the FCW status to the “Near” setting, allows from warning you of a possible collision with the vehicle the system to warn you of a possible collision with the in front of you.
Page 190: Service Fcw Warning
188 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Service FCW Warning ParkSense will retain the last system state (enabled or disabled) from the last ignition cycle when the ignition is If the system turns off, and the DID displays: changed to the ON/RUN position. •...
Page 191: Parksense Warning Display
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 189 ParkSense Warning Display The system will indicate a detected obstacle by showing a single arc in one or more regions based on the obstacle’s The ParkSense Warning screen will only be displayed if distance and location relative to the vehicle.
Page 192 190 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Single 1/2 Second Tone/Solid Arc Slow Tone/Solid Arc...
Page 193 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 191 Fast Tone/Flashing Arc Continuous Tone/Flashing Arc...
Page 194 192 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The vehicle is close to the obstacle when the warning display shows one flashing arc and sounds a continuous tone. The following chart shows the warning alert opera- tion when the system is detecting an obstacle: WARNING ALERTS Rear Greater...
Page 195 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 193 WARNING ALERTS Arc — Left None None None None None 2nd Flash- 1st Flashing Rear Arc — None 6th Solid 5th Solid 4th Solid 3rd Flash- 2nd Flash- 1st Flashing Center Rear Arc — None None None...
Page 196: Enabling And Disabling Parksense
194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Enabling And Disabling ParkSense When the ParkSense system is disabled, the Drivers Information Display (DID) will display ParkSense can be enabled and disabled with the the “PARKSENSE OFF” message for approxi- ParkSense switch, located on the switch panel below the mately five seconds.
Page 197: Service The Parksense Rear Park Assist System
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 Service The ParkSense Rear Park Assist System If “PARKSENSE UNAVAILABLE WIPE REAR SEN- SORS” appears in the Driver Information Display (DID), During vehicle start up, when the ParkSense Rear Park make sure the outer surface and the inside of the rear Assist System has detected a faulted condition, the fascia/bumper is clean and clear of snow, ice, mud, dirt instrument cluster will actuate a single chime, once...
Page 198: Parksense System Usage Precautions
196 UNDERSTANDING THE FEATURES OF YOUR VEHICLE • ParkSense will reduce the volume of the radio when it ParkSense System Usage Precautions is sounding an audio tone. NOTE: • Clean the ParkSense sensors regularly, taking care not • Ensure that the rear bumper is free of snow, ice, mud, to scratch or damage them.
Page 199 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 197 CAUTION! WARNING! • ParkSense is only a parking aid and it is unable to Drivers must be careful when backing up even when recognize every obstacle, including small obstacles. using the Rear Park Assist system. Always check Parking curbs might be temporarily detected or not carefully behind your vehicle, and be sure to check detected at all.
Page 200: Parkview Rear Back Up Camera - If Equipped
198 UNDERSTANDING THE FEATURES OF YOUR VEHICLE PARKVIEW REAR BACK UP CAMERA — If your vehicle is equipped with the Camera Delay IF EQUIPPED feature and it is turned ON, the rear camera image will be displayed for up to 10 seconds when the vehicle is shifted Your vehicle may be equipped with the ParkView Rear out of REVERSE unless the forward vehicle speed ex- Back Up Camera that allows you to see an on-screen...
Page 201 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199 Different colored zones indicate the distance to the rear of The following table shows the approximate distances for the vehicle. each zone: Zone Distance to the rear of the vehicle 0 - 1 ft (0 - 30 cm) Yellow 1 ft - 6.5 ft (30 cm - 2 m) Green...
Page 202: Overhead Console
200 UNDERSTANDING THE FEATURES OF YOUR VEHICLE OVERHEAD CONSOLE CAUTION! The overhead console contains courtesy/reading lights • To avoid vehicle damage, ParkView should only be and sunglass storage. Universal Garage Door Opener used as a parking aid. The ParkView camera is (HomeLink) button and a power sunroof switch may also unable to view every obstacle or object in your be included, if equipped.
Page 203: Courtesy/Reading Lights
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 201 Courtesy/Reading Lights GARAGE DOOR OPENER — IF EQUIPPED At the forward end of the overhead console are two HomeLink replaces up to three hand-held transmitters courtesy/reading lights. that operate devices such as garage door openers, motor- ized gates, lighting or home security systems.
Page 204: Before You Begin Programming Homelink
202 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Before You Begin Programming HomeLink Be sure that your vehicle is parked outside of the garage before you begin programming. For more efficient programming and accurate transmis- sion of the radio-frequency signal, it is recommended that a new battery be placed in the hand-held transmitter of the device that is being programmed to the HomeLink system.
Page 205: Programming A Rolling Code
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 203 NOTE: • Erasing all channels should only be performed when programming HomeLink for the first time. Do not erase channels when programming additional buttons. • If you have any problems, or require assistance, please call toll-free 1-800-355-3515 or, on the Internet at HomeLink.com for information or assistance.
Page 206 204 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 1. Place the ignition in the ON/RUN position. Firmly push and release the “LEARN” or “TRAIN- ING” button. On some garage door openers/devices 2. Place the hand-held transmitter 1 to 3 inches (3 to 8 cm) there may be a light that blinks when the garage door away from the HomeLink button you wish to program opener/device is in the LEARN/TRAIN mode.
Page 207: Programming A Non-Rolling Code
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 205 Reprogramming A Single HomeLink Button Programming A Non-Rolling Code (Rolling Code) For programming Garage Door Openers manufactured To reprogram a channel that has been previously trained, before 1995: follow these steps: 1. Place the ignition in the ON/RUN position. 1.
Page 208: Canadian/Gate Operator Programming
206 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 5. Push and hold the programmed HomeLink button 3. Without releasing the button, proceed with “Pro- and observe the indicator light. gramming A Non-Rolling Code” step 2 and follow all • If the indicator light stays on constantly, program- remaining steps.
Page 209 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 207 It may be helpful to unplug the device during the cycling 4. Watch for the HomeLink indicator to change flash process to prevent possible overheating of the garage rates. When it changes, it is programmed. It may take door or gate motor.
Page 210: Using Homelink
208 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Reprogramming A Single HomeLink Button system, entry door lock, home/office lighting, etc.) The (Canadian/Gate Operator) hand-held transmitter of the device may also be used at any time. To reprogram a channel that has been previously trained, follow these steps: Security 1.
Page 211: Troubleshooting Tips
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 209 Troubleshooting Tips WARNING! If you are having trouble programming HomeLink, here • Vehicle exhaust contains carbon monoxide, a dan- are some of the most common solutions: gerous gas. Do not run your vehicle in the garage •...
Page 212: General Information
210 UNDERSTANDING THE FEATURES OF YOUR VEHICLE General Information This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2.
Page 213: Opening Sunroof - Express
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 211 Opening Sunroof — Express WARNING! (Continued) Push the switch rearward and release it within one-half accessible to children. Do not leave the ignition of second. The sunroof and sunshade will open automati- a vehicle equipped with Keyless Enter-N-Go in the cally from any position.
Page 214: Closing Sunroof - Manual Mode
212 UNDERSTANDING THE FEATURES OF YOUR VEHICLE position. The sunroof will close fully and stop automati- NOTE: If three consecutive sunroof close attempts result cally. This is called “Express Close.” During Express in Pinch Protect reversals, the fourth close attempt will be Close operation, any other actuation of the switch will a Manual Close movement with Pinch Protect disabled.
Page 215: Wind Buffeting
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 213 Wind Buffeting Ignition Off Operation Wind buffeting can be described as the perception of The power sunroof switch will remain active for up to pressure on the ears or a helicopter-type sound in the approximately ten minutes after the ignition switch is ears.
Page 216 214 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Power outlets labeled with a “key” can be powered when The front power outlet is located next to the storage area the ignition is in the ON or ACC position, while the on the integrated center stack of the instrument panel. outlets labeled with a “battery”...
Page 217 UNDERSTANDING THE FEATURES OF YOUR VEHICLE 215 Power Outlet — Center Console Power Outlet Fuse Locations NOTE: All accessories connected to these powered out- 1 — #12 Fuse 20A Yellow Power Outlet Integrated Center Stack lets should be removed or turned off when the vehicle is 2 —...
Page 218 216 UNDERSTANDING THE FEATURES OF YOUR VEHICLE CAUTION! WARNING! (Continued) • Do not touch with wet hands. • Do not exceed the maximum power of 160 Watts • Close the lid when not in use and while driving the (13 Amps) at 12 Volts. If the 160 Watt (13 Amp) vehicle.
Page 219: Cupholders
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 217 CUPHOLDERS CAUTION! (Continued) Front Cupholders • Accessories that draw higher power (i.e., coolers, vacuum cleaners, lights, etc.), will degrade the The front cupholders are located in the center console battery even more quickly. Only use these intermit- and in the door panels.
Page 220: Rear Cupholders
218 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Rear Cupholders The rear seat cupholders are located in the center armrest between the rear seats. The cupholders are positioned forward in the armrest and side-by-side to provide conve- nient access to beverage cans or bottles while maintaining a resting place for the rear occupant’s elbows.
Page 221: Storage
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 219 STORAGE Glove Compartment The glove compartment is located on the passenger side of the instrument panel. Opened Glove Compartment Glove Compartment...
Page 222: Console Storage
220 UNDERSTANDING THE FEATURES OF YOUR VEHICLE Console Storage The center console has a storage compartment located underneath the armrest. The compartment contains a 12 Volt power outlet, and a molded-in coin holder (designed to hold various size coins). The center console may also be equipped with a Universal Consumer Inter- face (UCI).
Page 223: Rear Window Features
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 221 REAR WINDOW FEATURES CAUTION! Rear Window Defroster Failure to follow these cautions can cause damage to the heating elements: The rear window defroster button is located on • Use care when washing the inside of the rear the climate control (Mode) knob.
Page 225 UNDERSTANDING YOUR INSTRUMENT PANEL CONTENTS INSTRUMENT PANEL FEATURES ..227 DRIVER INFORMATION DISPLAY (DID) ..261 ▫ Engine Oil Life Reset ....264 INSTRUMENT CLUSTER —...
Page 226 224 UNDERSTANDING YOUR INSTRUMENT PANEL UCONNECT SETTINGS ....283 SRT DRIVE MODES .....313 ▫...
Page 227 UNDERSTANDING YOUR INSTRUMENT PANEL 225 iPod/USB/MP3 CONTROL — IF EQUIPPED . . .332 UCONNECT VOICE RECOGNITION QUICK TIPS ......349 STEERING WHEEL AUDIO CONTROLS —...
Page 228 226 UNDERSTANDING YOUR INSTRUMENT PANEL ▫ Register (8.4A/8.4AN) ....361 ▫ Siri Eyes Free — If Equipped ... . .367 ▫...
Page 229: Instrument Panel Features
UNDERSTANDING YOUR INSTRUMENT PANEL 227 INSTRUMENT PANEL FEATURES 1 — Air Outlets 5 — Keyless Start/Stop Button 2 — Instrument Cluster 6 — Trunk Release Button 3 — Glove Compartment 7 — Headlight Switch 4 — Media Center...
Page 230: Instrument Cluster - Srt
228 UNDERSTANDING YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER — SRT Instrument Cluster For SRT 6.4L...
Page 231 UNDERSTANDING YOUR INSTRUMENT PANEL 229 1. Tachometer 5. Temperature Gauge • Indicates the engine speed in revolutions per minute • The temperature gauge shows engine coolant tem- (RPM x 1000). perature. Any reading within the normal range indi- cates that the engine cooling system is operating 2.
Page 232 230 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! (Continued) remains on the “H”, turn the engine off immediately and call an authorized dealer for service. WARNING! A hot engine cooling system is dangerous. You or others could be badly burned by steam or boiling coolant.
Page 233: Instrument Cluster - Srt
UNDERSTANDING YOUR INSTRUMENT PANEL 231 INSTRUMENT CLUSTER — SRT Instrument Cluster For SRT 6.2L Supercharged...
Page 234 232 UNDERSTANDING YOUR INSTRUMENT PANEL • 1. Tachometer The fuel pump symbol points to the side of the • Indicates the engine speed in revolutions per minute vehicle where the fuel door is located. (RPM x 1000). 5. Temperature Gauge •...
Page 235: Warning And Indicator Lights
UNDERSTANDING YOUR INSTRUMENT PANEL 233 WARNING AND INDICATOR LIGHTS CAUTION! (Continued) IMPORTANT: The warning / indicator lights switch on “H” pull over and stop the vehicle. Idle the vehicle in the instrument panel together with a dedicated mes- with the air conditioner turned off until the pointer sage and/or acoustic signal when applicable.
Page 236: Red Telltale Indicator Lights
234 UNDERSTANDING YOUR INSTRUMENT PANEL Red Telltale Indicator Lights Seat Belt Reminder Warning Light Red Telltale What It Means Light Seat Belt Reminder Warning Light When the ignition switch is first turned to ON/RUN, this light will turn on for four to eight seconds as a bulb check.
Page 237 UNDERSTANDING YOUR INSTRUMENT PANEL 235 Air Bag Warning Light Red Telltale What It Means Light Air Bag Warning Light This light will turn on for four to eight seconds as a bulb check when the ignition switch is first turned to ON/RUN. If the light is either not on during startup, stays on, or turns on while driving, have the system inspected at an authorized dealer as soon as possible.
Page 238 236 UNDERSTANDING YOUR INSTRUMENT PANEL Brake Warning Light Red Telltale What It Means Light Brake Warning Light This light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on it may indicate that the parking brake is applied, that the brake fluid level is low, or that there is a problem with the anti-lock brake system reservoir.
Page 239 UNDERSTANDING YOUR INSTRUMENT PANEL 237 The light will remain on until the cause is corrected. Operation of the Brake Warning Light can be checked by turning the ignition switch from the OFF position to the NOTE: The light may flash momentarily during sharp ON/RUN position.
Page 240 238 UNDERSTANDING YOUR INSTRUMENT PANEL Vehicle Security Warning Light — If Equipped Red Telltale What It Means Light Vehicle Security Warning Light — If Equipped This light will flash at a fast rate for approximately 15 seconds when the vehicle security alarm is arming, and then will flash slowly until the vehicle is disarmed.
Page 241 UNDERSTANDING YOUR INSTRUMENT PANEL 239 Red Warning What It Means Light If the light turns on while driving, safely pull over and stop the vehicle. If the A/C system is on, turn it off. Also, shift the transmission into NEUTRAL and idle the vehicle. If the tem- perature reading does not return to normal, turn the engine off immediately and call for ser- vice.
Page 242 240 UNDERSTANDING YOUR INSTRUMENT PANEL Oil Pressure Warning Light Red Telltale What It Means Light Oil Pressure Warning Light This light indicates low engine oil pressure. If the light turns on while driving, stop the vehicle and shut off the engine as soon as possible. A chime will sound when this light turns on.
Page 243 UNDERSTANDING YOUR INSTRUMENT PANEL 241 Electronic Throttle Control (ETC) Warning Light Red Telltale What It Means Light Electronic Throttle Control (ETC) Warning Light This light informs you of a problem with the Electronic Throttle Control (ETC) system. If a problem is detected while the engine is running, the light will either stay on or flash de- pending on the nature of the problem.
Page 244 242 UNDERSTANDING YOUR INSTRUMENT PANEL Transmission Temperature Warning Light Red Telltale What It Means Light Transmission Temperature Warning Light This light indicates that the transmission fluid temperature is running hot. This may occur with severe usage. If this light turns on, safely pull over and stop the vehicle. Then, place the transmission into NEUTRAL and run the engine at idle speed or apply light foot pressure to increase the engine speed RPM until the Transmission Temperature light turns off.
Page 245 UNDERSTANDING YOUR INSTRUMENT PANEL 243 Electric Power Steering Fail Warning — If Equipped Red Telltale What It Means Light Electric Power Steering Fail Warning — If Equipped This light is used to manage the electrical warning of the EPS (Power Steering System). Refer to “Power Steering”...
Page 246 244 UNDERSTANDING YOUR INSTRUMENT PANEL Trunk Open Warning Light Red Telltale What It Means Light Trunk Open Warning Light This indicator will illuminate when the trunk is open and not fully closed. NOTE: If the vehicle is moving, there a single chime will sound.
Page 247: Yellow Telltale Indicator Lights
UNDERSTANDING YOUR INSTRUMENT PANEL 245 Yellow Telltale Indicator Lights Engine Check/Malfunction Indicator Light (MIL) Yellow Telltale What It Means Light Engine Check/Malfunction Indicator Light (MIL) The Engine Check/Malfunction Indicator Light (MIL) is a part of an Onboard Diagnostic System called OBD II that monitors engine and automatic transmission control systems. The light will illuminate when the ignition is in the ON position before engine start.
Page 248 246 UNDERSTANDING YOUR INSTRUMENT PANEL CAUTION! Prolonged driving with the Malfunction Indicator Light (MIL) on could cause damage to the engine control system. It also could affect fuel economy and driveability. If the MIL is flashing, severe catalytic converter damage and power loss will soon occur. Immediate service is required.
Page 249 UNDERSTANDING YOUR INSTRUMENT PANEL 247 Electronic Stability Control (ESC) Indicator Light — If Equipped Yellow Telltale What It Means Light Electronic Stability Control (ESC) Indicator Light — If Equipped The “ESC Indicator Light” in the instrument cluster will come on when the ignition switch is turned to the ON/RUN position, and when ESC is activated.
Page 250 248 UNDERSTANDING YOUR INSTRUMENT PANEL Electronic Stability Control (ESC) OFF Indicator Light — If Equipped Yellow Telltale What It Means Light Electronic Stability Control (ESC) OFF Indicator Light — If Equipped This light indicates the Electronic Stability Control (ESC) is off. Low Washer Fluid Indicator Light —...
Page 251 UNDERSTANDING YOUR INSTRUMENT PANEL 249 Tire Pressure Monitoring Indicator Light Yellow Telltale What It Means Light Tire Pressure Monitoring Indicator Light The warning light switches on and a message is displayed to indicate that the tire pressure is lower than the recommended value and/or that slow pressure loss is occurring. In these cases, optimal tire duration and fuel consumption may not be guaranteed.
Page 252 250 UNDERSTANDING YOUR INSTRUMENT PANEL As an added safety feature, your vehicle has been Your vehicle has also been equipped with a TPMS equipped with a Tire Pressure Monitoring System malfunction indicator to indicate when the system is not (TPMS) that illuminates a low tire pressure telltale when operating properly.
Page 253 UNDERSTANDING YOUR INSTRUMENT PANEL 251 CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system opera- tion or sensor damage may result when using re- placement equipment that is not of the same size, type, and/or style.
Page 254 252 UNDERSTANDING YOUR INSTRUMENT PANEL Anti-Lock Brake (ABS) Indicator Light Yellow Telltale What It Means Light Anti-Lock Brake (ABS) Indicator Light This light monitors the Anti-Lock Brake System (ABS). The light will turn on when the igni- tion switch is placed in the ON/RUN position and may stay on for as long as four seconds. If the ABS light remains on or turns on while driving, then the Anti-Lock portion of the brake system is not functioning and service is required.
Page 255 UNDERSTANDING YOUR INSTRUMENT PANEL 253 Low Fuel Indicator Light Yellow Telltale What It Means Light Low Fuel Indicator Light When the fuel level reaches approximately 1.5 gal (5.8 L) this light will turn on, and remain on until fuel is added. Adaptive Cruise Control Fault Indicator Light —...
Page 256 254 UNDERSTANDING YOUR INSTRUMENT PANEL Service Forward Collision Warning Indicator Light — If Equipped Yellow Telltale What It Means Light Service Forward Collision Warning Indicator Light — If Equipped This telltale will turn on when there is a fault in the Forward Collision Warning system. Contact your authorized dealership.
Page 257: Green Telltale Indicator Lights
UNDERSTANDING YOUR INSTRUMENT PANEL 255 Green Telltale Indicator Lights Front Fog Indicator Light — If Equipped Green Telltale What It Means Light Front Fog Indicator Light — If Equipped This indicator will illuminate when the front fog lights are on. Park/Headlight ON Indicator Light Green Telltale What It Means...
Page 258 256 UNDERSTANDING YOUR INSTRUMENT PANEL ECO Mode Indicator Light Green Telltale Light What It Means ECO Mode Indicator Light This light will turn on when ECO Mode is active. Turn Signal Indicator Lights Green Telltale What It Means Light Turn Signal Indicator Lights The instrument cluster directional arrow will flash independently for the LEFT or RIGHT turn signal as selected, as well as the exterior turn signal lamp(s) (front and rear) as selected when the multifunction lever is moved down (LEFT) or up (RIGHT).
Page 259: Blue Telltale Indicator Lights
UNDERSTANDING YOUR INSTRUMENT PANEL 257 Cruise Control Engaged Indicator Light Green Telltale What It Means Light Cruise Control Engaged Indicator Light This light will turn on when the cruise control has been set to a certain speed. Blue Telltale Indicator Lights High Beam Indicator Light Blue Telltale What It Means...
Page 260: White Telltale Indicator Lights
258 UNDERSTANDING YOUR INSTRUMENT PANEL White Telltale Indicator Lights Electronic Speed Control ON Indicator Light White Telltale What It Means Light Electronic Speed Control ON Indicator Light This light will turn on when the electronic speed control is ON, but not set.
Page 261 UNDERSTANDING YOUR INSTRUMENT PANEL 259 Sport Mode Indicator Light White Telltale What It Means Light Sport Mode Indicator Light This light will turn on when Sport Mode is active. Refer to “Drive Modes” in “Starting And Operating” for further information. Track Mode Indicator Light White Telltale What It Means...
Page 262 260 UNDERSTANDING YOUR INSTRUMENT PANEL Custom Mode Indicator Light White Telltale What It Means Light Custom Mode Indicator Light This light will turn on when Custom Mode is active. Refer to “Drive Modes” in “Starting And Operating” for further information. Valet Mode Indicator Light White Telltale What It Means...
Page 263: Driver Information Display (Did)
UNDERSTANDING YOUR INSTRUMENT PANEL 261 DRIVER INFORMATION DISPLAY (DID) This system conveniently allows the driver to select a variety of useful information by pushing the arrow The Driver Information Display (DID) features an inter- buttons located on the left side of the steering wheel. The active display which is located in the instrument cluster.
Page 264 262 UNDERSTANDING YOUR INSTRUMENT PANEL The system allows the driver to select information by UP And DOWN Arrow Buttons: pushing the following buttons mounted on the steering Using the UP or DOWN arrows allows you to wheel: cycle through the Main Menu Items. Changes the Main Screen area and Menu Title area.
Page 265 UNDERSTANDING YOUR INSTRUMENT PANEL 263 NOTE: For Screen Setup: • Holding the UP/DOWN or LEFT/RIGHT arrow but- • OK button allows user to enter menu and submenus. ton will loop the user through the currently selected • Within each submenu layer, the UP and DOWN menu or options presented on the screen.
Page 266: Engine Oil Life Reset
264 UNDERSTANDING YOUR INSTRUMENT PANEL Engine Oil Life Reset Vehicles Equipped With Keyless Enter-N-Go — Ignition Oil Change Required Your vehicle is equipped with an engine oil change Your vehicle is equipped with an engine oil change indicator system. The “Oil Change Required” message indicator system.
Page 267 UNDERSTANDING YOUR INSTRUMENT PANEL 265 2. Push and release the DOWN arrow button to Secondary Method Of Resetting Engine Oil Life scroll downward through the main menu to “Ve- 1. Without pushing the brake pedal, push the ENGINE hicle Info.” START/STOP button and place the ignition to the 3.
Page 268: Performance Shift Indicator (Psi) - If Equipped
266 UNDERSTANDING YOUR INSTRUMENT PANEL Performance Shift Indicator (PSI) – If Equipped Cruise Control The Performance Shift Indicator (PSI) is enabled on This area will show reconfigurable white caution tell- vehicles with manual transmission, or when a vehicle tales. These telltales include: with automatic transmission is in manual shift mode.
Page 269 UNDERSTANDING YOUR INSTRUMENT PANEL 267 Speedometer Oil Pressure Push and release the UP or DOWN arrow button until Oil Life the Speedometer menu is displayed in the DID. Push and Battery Voltage release the OK button to toggle units (km/h or mph) of the digital speedometer Intake Air Temp Vehicle Info...
Page 270 268 UNDERSTANDING YOUR INSTRUMENT PANEL Performance Features — If Equipped The Performance Features include the following: • 0-60 MPH (0-100 km/h) Timer WARNING! – Best Measurement of vehicle statistics with the Perfor- – Last mance Features is intended for off-highway or off- –...
Page 271 UNDERSTANDING YOUR INSTRUMENT PANEL 269 • 1/4 Mile (400 meters) Timer The following describes each feature and its operation: – Best 0-60 MPH (0-100 km/h) – Last When selected, this screen displays the time it takes for – Current the vehicle to go from 0 to 60 MPH (0 to 100 km/h) –...
Page 272 270 UNDERSTANDING YOUR INSTRUMENT PANEL 0 to 100 MPH (0 to 161 km/h) words ’GO’ is your reaction time. If wheel speed is greater than 0 MPH before ’GO’, the reaction time will be When selected, this screen displays the time it takes for a negative time.
Page 273 UNDERSTANDING YOUR INSTRUMENT PANEL 271 • To clear the vehicle’s best 1/8 mile (200 meters) run, Braking Distance push and hold the OK button for five seconds. When selected, this screen displays the vehicle’s braking distance, and the speed at which the brake pedal was 1/4 Mile (400 Meters) pushed.
Page 274 272 UNDERSTANDING YOUR INSTRUMENT PANEL • Pushing the OK button will start “current” timer from Current G-Force 0:00.0. When selected, this screen displays the current G-Force • When the OK button is pushed, the times are updated (lateral and longitudinal) that displays the directions of the forces.
Page 275 UNDERSTANDING YOUR INSTRUMENT PANEL 273 • The timer will stop when the driver navigates away Top Speed from this page. When selected, this screen displays the Top Speed since last reset: Lap History • Populates a top speed from first drive cycle and every When selected, this screen displays the Lap History, and will color highlight the time that is the best time from the time that speed is exceeded that number is stored here...
Page 276 274 UNDERSTANDING YOUR INSTRUMENT PANEL Push the ADAPTIVE CRUISE CONTROL (ACC) ON/ The ACC screen may display once again if any ACC OFF button (located on the steering wheel) until one of activity occurs, which may include any of the following: the following displays in the DID: •...
Page 277 UNDERSTANDING YOUR INSTRUMENT PANEL 275 Fuel Economy Trip Info Two submenu pages one with Current value (instanta- Toggle the LEFT or RIGHT arrow button to neous calculation of the fuel economy) displayed and one select Trip A or Trip B. The Trip information will without the Current Value displayed (toggle the LEFT display the following: or RIGHT...
Page 278 276 UNDERSTANDING YOUR INSTRUMENT PANEL • Range to Empty (default) Stored Messages • Average L/100km (or MPG) This feature shows the number of stored warning mes- • Current L/100km (or MPG) sages, if any. Pushing the RIGHT or LEFT arrow •...
Page 279 UNDERSTANDING YOUR INSTRUMENT PANEL 277 3. Center 4. Current Gear • Menu Title (default) • On • Compass • Off (default) • Outside Temp. 5. Odometer • Time • Show (default) • Range to Empty • Hide • Average L/100km (or MPG) 6.
Page 280: Battery Saver On/Battery Saver Mode Message - Electrical Load Reduction Actions - If Equipped
278 UNDERSTANDING YOUR INSTRUMENT PANEL • If the menu is exited before the end of codes is reached Diagnostics — If Equipped - when the driver re-enters the list will be restarted This feature allows the driver to view engine and emis- from the beginning.
Page 281 UNDERSTANDING YOUR INSTRUMENT PANEL 279 • If the Battery Charge Warning Light is on it may Load reduction is only active when the engine is running. It will display a message if there is a risk of battery indicate a problem with the charging system. Refer to depletion to the point where the vehicle may stall due to “Battery Charge Warning Light”...
Page 282 280 UNDERSTANDING YOUR INSTRUMENT PANEL • The vehicle was parked for an extended period of time Loss of the battery charge may indicate one or more of the following conditions: (weeks, months). • The charging system cannot deliver enough electrical •...
Page 283: Cybersecurity
UNDERSTANDING YOUR INSTRUMENT PANEL 281 – Check what may be plugged in to power outlets CYBERSECURITY +12V, 115V AC, USB ports Your vehicle may be a connected vehicle and may be – Check HVAC settings (blower, temperature) equipped with both wired and wireless networks. These –...
Page 284 282 UNDERSTANDING YOUR INSTRUMENT PANEL The risk of unauthorized and unlawful access to your WARNING! (Continued) vehicle systems may still exist, even if the most recent may increase the possibility for vehicle systems to version of vehicle software (such as Uconnect software) is be breached.
Page 285: Uconnect Settings
UNDERSTANDING YOUR INSTRUMENT PANEL 283 Privacy of any wireless and wired communications can- not be assured. Third parties may unlawfully intercept information and private communications without your consent. For further information, refer to “Privacy Prac- tices – If Equipped with Uconnect 8.4 radio” in “All About Uconnect Access”...
Page 286: Buttons On The Faceplate
284 UNDERSTANDING YOUR INSTRUMENT PANEL Buttons On The Faceplate Buttons On The Touchscreen Buttons on the faceplate are located below the Uconnect Buttons on the touchscreen are accessible on the system in the center of the instrument panel. In addition, Uconnect display.
Page 287 UNDERSTANDING YOUR INSTRUMENT PANEL 285 NOTE: Display • Only one touchscreen area may be selected at a time. After pressing the “Display” button on the touchscreen, the following settings will be available: • Depending on the vehicles options, feature settings •...
Page 288 286 UNDERSTANDING YOUR INSTRUMENT PANEL • Display Brightness With Headlights OFF • Set Language When in this display, you may select the brightness with When in this display, you may select one of multiple the headlights off. Adjust the brightness from (1–10) with languages (English / Français / Español) for all display the “+”...
Page 289 UNDERSTANDING YOUR INSTRUMENT PANEL 287 • Control Screen Time-Out — If Equipped Units After pressing the “Units” button on the touchscreen you When this feature is selected, the Controls Screen will may select each unit of measure independently displayed stay open for five seconds before the screen times out. in the Driver Information Display (DID), and navigation With the feature deselected, the screen will stay open system (if equipped).
Page 290 288 UNDERSTANDING YOUR INSTRUMENT PANEL • Temperature • Show Command List Select from: “°C,” or “°F.” When in this display, you may change the Show Com- mand List settings. To change the Show Command List • Power settings, press the “Always,” “With Help” or “Never” Select from: “HP”...
Page 291 UNDERSTANDING YOUR INSTRUMENT PANEL 289 • Set Time Hours • Show Time In Status Bar — If Equipped This feature will allow you to adjust the hours. The “Sync This feature will allow you to turn on or shut off the time with GPS”...
Page 292 290 UNDERSTANDING YOUR INSTRUMENT PANEL away. This gives you the most reaction time. To change with Sound Only, or Sound and Display. To change the the setting for more dynamic driving, select the Near ParkSense status, press and release the “Sound Only” or setting.
Page 293 UNDERSTANDING YOUR INSTRUMENT PANEL 291 • ParkView Backup Camera Active Guidelines in your blind spot. The Blind Spot Alert feature can be activated in “Lights” mode. When this mode is selected, Your vehicle may be equipped with the ParkView Rear the Blind Spot Monitor (BSM) system is activated and Back Up Camera Active Guidelines that allows you to see will only show a visual alert in the exterior mirrors.
Page 294 292 UNDERSTANDING YOUR INSTRUMENT PANEL • Hill Start Assist — If Equipped vehicle is shifted out of REVERSE (with camera delay turned ON), the rear view image with dynamic grid lines When this feature is selected, the Hill Start Assist (HSA) will be displayed for up to 10 seconds after shifting out of system is active.
Page 295 UNDERSTANDING YOUR INSTRUMENT PANEL 293 • Headlight Illumination On Approach • Auto Dim High Beams — If Equipped When this feature is selected, the headlights will activate When this feature is selected, the high beam headlights and remain on for 0, 30, 60 or 90 seconds when the doors will activate/deactivate automatically under certain con- are unlocked with the Remote Keyless Entry (RKE) Key ditions.
Page 296 294 UNDERSTANDING YOUR INSTRUMENT PANEL • Flash Lights With Lock button on the touchscreen, until a check-mark appears next to the setting, showing that the setting has been When this feature is selected, the hazard lights will flash selected. when the doors are locked or unlocked with the Remote •...
Page 297 UNDERSTANDING YOUR INSTRUMENT PANEL 295 • Sound Horn With Remote Start 1st Press Of Key Fob Unlocks “Driver Door” is pro- grammed, only the driver’s door will unlock when the When this feature is selected, the horn will sound when driver’s door is grasped.
Page 298 296 UNDERSTANDING YOUR INSTRUMENT PANEL • Personal Settings Linked to Key Fob — If Equipped Auto Comfort Systems — If Equipped After pressing the “Auto-On Comfort” button on the This feature provides automatic recall of all settings touchscreen the following settings will be available: stored to a memory location (driver’s seat, exterior mirrors, steering column position and radio station pre- •...
Page 299 UNDERSTANDING YOUR INSTRUMENT PANEL 297 Engine Off Options button on the touchscreen to select your desired time interval, and choose from “0 seconds,” “45 seconds,” “5 After pressing the “Engine Off Options” button on the minutes” or “10 minutes.” touchscreen the following settings will be available: •...
Page 300 298 UNDERSTANDING YOUR INSTRUMENT PANEL • Equalizer • AUX Volume Offset — If Equipped This feature allows you to adjust the Bass, Mid and Treble This feature provides the ability to tune the audio level settings. Adjust the settings with the “+” and “–” setting for portable devices connected through the AUX input.
Page 301 UNDERSTANDING YOUR INSTRUMENT PANEL 299 • Paired Audio Sources services, it will be necessary to access the information on the Subscription Information screen to re-subscribe. This feature shows which audio devices are paired to the Phone/Bluetooth system. For further information, refer Press the “Subscription Info”...
Page 302: Srt Performance Pages
300 UNDERSTANDING YOUR INSTRUMENT PANEL pop-up will appear asking Are you sure you want to System Information reset your settings to default?” select “OK” to restore, After pressing the “System Information” button on the “Cancel” or “X” to exit without making changes. Once touchscreen the following information will be available: the settings are restored, a pop up appears stating •...
Page 303 UNDERSTANDING YOUR INSTRUMENT PANEL 301 Press the desired button on the touchscreen to access that The Performance Pages include the following: specific Performance Page. • Home • Timers WARNING! • Gauges 1 Measurement of vehicle statistics with the SRT Per- formance Pages is intended for off-highway or off- •...
Page 304: Home
302 UNDERSTANDING YOUR INSTRUMENT PANEL The following describes each feature and its operation: When Home is selected, the following features will be available: Home • A series of six images which can be selected by the user. • A left and right arrow to allow the user to scroll through vehicle images.
Page 305: Timers
UNDERSTANDING YOUR INSTRUMENT PANEL 303 Timers When the Timers Page is selected you will be able to select from following “Tickets”: • Current Pressing the “Current” button displays a “real time” summary of the performance timers. • Last Pressing the “Last” button displays the last recorded run of performance timers.
Page 306 304 UNDERSTANDING YOUR INSTRUMENT PANEL • Save • With a USB jump drive installed, press the “USB” button to save runs to the jump drive. Pressing the “Save” button will let you save the current, • With an SD Card installed, press the “SD Card” to save last or best page currently being viewed.
Page 307 UNDERSTANDING YOUR INSTRUMENT PANEL 305 • ¼ Mile (400 meter) NOTE: • Positive values closest to zero are best, negative values Displays the time it takes for the vehicle to go an ¼ mile mean you have faulted the start and the value won’t be (400 meters).
Page 308: Gauges 1
306 UNDERSTANDING YOUR INSTRUMENT PANEL Gauges 1 SRT Performance Pages — Gauges 1 (6.2L Automatic Transmission) SRT Performance Pages — Gauges 1 (6.2L Manual When selected, this screen displays the following values: Transmission) • Coolant Temperature Shows the actual coolant temperature.
Page 309 UNDERSTANDING YOUR INSTRUMENT PANEL 307 • Oil Pressure Shows the actual oil pressure. • Oil Temperature Shows the actual oil temperature. • Battery Voltage Shows the actual battery voltage. • Trans Oil Temp (Auto Transmission Only) Shows the actual automatic transmission oil temperature. SRT Performance Pages —...
Page 310: Gauges 2
308 UNDERSTANDING YOUR INSTRUMENT PANEL • Oil Pressure Shows the actual oil pressure. Gauges 2 SRT Performance Pages — Gauges 2 (6.4L Automatic Transmission) When selected, this screen displays the following values: • Battery Voltage Shows the actual battery voltage. SRT Performance Pages —...
Page 311 UNDERSTANDING YOUR INSTRUMENT PANEL 309 • Intake Air Temperature When selected, this screen displays the following values: • Boost Pressure Shows the actual intake air temperature. • Transmission Temperature (Automatic Transmission Shows the current value for boost pressure. Only) • Air Fuel Ratio Shows the actual transmission temperature.
Page 312: G-Force
310 UNDERSTANDING YOUR INSTRUMENT PANEL G-Force When G-Force is selected, the following features will be available: • Lateral G-Force Left and Right The lateral g-force measures the (sideways) left and right force of the vehicle. • Longitudinal G-Force Fore and Aft The longitudinal g-force measures the acceleration and braking force of the vehicle.
Page 313: Engine
UNDERSTANDING YOUR INSTRUMENT PANEL 311 • Vehicle Speed Engine Vehicle Speed measures the current speed of the vehicle in either mph or km/h, starting at 0 with no maximum value. • Steering Wheel Angle Steering Wheel Angle utilizes the steering angle sensor to measure the degree of the steering wheel relative to zero.
Page 314 312 UNDERSTANDING YOUR INSTRUMENT PANEL Shows the instantaneous horsepower. • Instantaneous Torque Shows the instantaneous torque. • Oil Pressure (6.4L Only) Shows the actual oil pressure. • Gear (Automatic Transmission Only) Shows the current (or pending) operating gear of the vehicle.
Page 315: Srt Drive Modes
UNDERSTANDING YOUR INSTRUMENT PANEL 313 SRT DRIVE MODES RED key FOB unlocks the full potential of the engine’s output, and allows the driver to select from two power Key FOB 6.2L Supercharged Engine — If Equipped levels within Drive Modes Set-Up. Red Key FOB Black Key FOB If your vehicle is equipped with the 6.2L supercharged...
Page 316 314 UNDERSTANDING YOUR INSTRUMENT PANEL the SRT Drive Modes interface, and can be accessed by Your SRT vehicle is equipped with a Drive Modes feature pressing the “KEY FOB” button on the touchscreen in the which allows for coordinating the operation of various SRT Drive Modes menu.
Page 317 UNDERSTANDING YOUR INSTRUMENT PANEL 315 Engine/ Red Key/ Black Key/ Trans- Paddle Suspen- Transmis- Steering Traction 700+ HP 500 HP mission Shifters sion sion 6.2L Auto 6.2L Manual 6.4L Auto 6.4L Manual The SRT Drive Modes main screen displays the current “Street.”...
Page 318: Track Mode
316 UNDERSTANDING YOUR INSTRUMENT PANEL Listed below are the available Drive Modes: are all set to their “Track” settings highlighted in red. The Paddle Shifters are enabled. Track Mode Sport Mode Drive Modes (Track) Drive Modes (Sport) Pressing the “Track” button on the touchscreen will Pressing the “Sport”...
Page 319: Default Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 317 The Traction, Transmission, Steering, and Suspension This mode is for typical driving conditions where the systems are all set to their “Sport” settings highlighted in Traction and Transmission will be operating in their orange. The Paddle Shifters are enabled. Street settings, which cannot be changed while in this mode.
Page 320: Custom Mode
318 UNDERSTANDING YOUR INSTRUMENT PANEL Custom Mode screen. Custom Mode allows the you to create a custom configuration that is saved for quick selection of your favorite settings. While in Custom Mode, the Power, Traction, Transmission, Steering, Suspension, and Paddle Shifter settings are shown in their current configuration.
Page 321 UNDERSTANDING YOUR INSTRUMENT PANEL 319 While in the Custom Drive Mode screen, press the Power — If Equipped With 6.2L Supercharged “Custom Set-Up” button on the touchscreen to access the Engine selectable options. In the Custom Mode Set-Up screen the individual current configuration will be displayed.
Page 322 320 UNDERSTANDING YOUR INSTRUMENT PANEL • 700+ Transmission Press the “700+” button on the touchscreen to modify the output power of the engine to 700+. NOTE: This selection is only available with the RED RKE Key Fob. • 500 Press the “500” button on the touchscreen to modify the output power of the engine to 500.
Page 323 UNDERSTANDING YOUR INSTRUMENT PANEL 321 • Sport Paddle Shifters – If Equipped With Automatic Transmission Press the “Sport” button on the touchscreen to provide faster shift speeds and will have a moderate comfort trade-off. • Street Press the “Street” button on the touchscreen to provide a balance of shift speed and comfort for typical daily driving.
Page 324 322 UNDERSTANDING YOUR INSTRUMENT PANEL • OFF • Track Press the “OFF” button on the touchscreen to disable Press the “Track” button on the touchscreen to modify steering wheel paddle shifters. traction control to optimize track performance with the least stability control. Traction •...
Page 325 UNDERSTANDING YOUR INSTRUMENT PANEL 323 • Track Suspension Press the “Track” button on the touchscreen to provide the firmest possible suspension stiffness with the highest amount of comfort trade-off. • Sport Press the “Sport” button on the touchscreen to provide a firmer suspension stiffness with moderate comfort trade- off.
Page 326 324 UNDERSTANDING YOUR INSTRUMENT PANEL • Track Steering — If Equipped With 6.4L Engine Press the “Track” button on the touchscreen to adjust the steering effort to the highest level. • Sport Press the “Sport” button on the touchscreen to adjust the steering effort to the higher level.
Page 327: Race Options
UNDERSTANDING YOUR INSTRUMENT PANEL 325 RACE OPTIONS Launch Control screen. Within Race Options, you can activate, deactivate, and adjust the RPM values for the Launch Control and Shift Light features. Launch Control WARNING! Launch Mode is intended for off-highway or off-road use only and should not be used on any public roadways.
Page 328 326 UNDERSTANDING YOUR INSTRUMENT PANEL bank then selecting the “Race Options” button on the touchscreen. Press the “Activate Launch Control” button on the touchscreen to activate the feature. Press the “Launch RPM Set-Up” to set the holding RPM. Launch Mode can be turned on or off by either pushing the Launch Control button on the instrument panel switch bank (if activated), or by pressing the “Cancel Launch Mode”...
Page 329: Shift Light
UNDERSTANDING YOUR INSTRUMENT PANEL 327 For further information refer to “Drive Modes” in “Start- ing and Operating”. Shift Light Launch RPM Set-Up — Manual Transmission To adjust the Launch RPM, drag the slider bar or press the arrows on the touchscreen to adjust the holding RPM. The launch RPM limits will vary between the automatic transmissions (1500–3500 RPM) and manual transmis- Shift Light...
Page 330 328 UNDERSTANDING YOUR INSTRUMENT PANEL Your vehicle is equipped with a shift light feature that illuminates the back lighting of the tachometer (in red) within the Driver Information Display (DID). This fea- ture is a visual cue to manually up-shift using the paddle shifters or the transmission gear selector in manual shift mode.
Page 331: Valet Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 329 Pressing and releasing the up/down arrow buttons on VALET MODE the touchscreen above and below each listed gear, the RPM values will change in increments of 250 RPM. Pressing and holding the arrows will change the RPM values in increments of 500 RPM, ranging from 2000–...
Page 332 330 UNDERSTANDING YOUR INSTRUMENT PANEL • The ESC Off button is disabled. will be asked to enter a 4 digit PIN code. The PIN code is not set, so you are free to select any 4 digit numeric • The Launch Control button is disabled. combination that will be easy to remember.
Page 333 UNDERSTANDING YOUR INSTRUMENT PANEL 331 To exit Valet Mode, you must enter the same 4 digit PIN The Valet Mode Deactivation key pad will then prompt that was used to enter the mode. The unlock keypad can you for your 4 digit PIN code. Enter your PIN code, and be accessed by either pushing the SRT button on the press the “OK”...
Page 334: Eco Mode - If Equipped With Automatic Transmission
332 UNDERSTANDING YOUR INSTRUMENT PANEL ECO MODE — IF EQUIPPED WITH AUTOMATIC economy at a trade-off with acceleration performance. TRANSMISSION Increased engine exhaust noise and/or vibration may be noticed while Eco is active. This is normal and a result of the increased amount of operating conditions where the vehicle is allowed to operate in four cylinder shutoff mode (6.4L Only).
Page 335 UNDERSTANDING YOUR INSTRUMENT PANEL 333 Located in the front storage area of the center console, iPod control supports Mini, 4G, Photo, Nano, 5G iPod this feature allows an iPod/MP3 player, or an external and iPhone devices. Some iPod software versions may USB device, to be connected to the audio system.
Page 336: Steering Wheel Audio Controls
334 UNDERSTANDING YOUR INSTRUMENT PANEL STEERING WHEEL AUDIO CONTROLS — The right-hand control is a rocker-type switch with a IF EQUIPPED push-button in the center and controls the volume and mode of the sound system. Pushing the top of the rocker The remote sound system controls are located on the rear switch will increase the volume, and pushing the bottom surface of the steering wheel.
Page 337: Media Mode
UNDERSTANDING YOUR INSTRUMENT PANEL 335 The button located in the center of the left-hand control not harmful to the radio. If your radio performance does will tune to the next preset station that you have pro- not satisfactorily “clear” by the repositioning of the grammed in the radio preset button.
Page 338 336 UNDERSTANDING YOUR INSTRUMENT PANEL The radio manufacturer believes the internal wireless NOTE: radio is safe for use by consumers. The level of energy • This equipment has been tested and found to comply emitted is far less than the electromagnetic energy emit- with the limits for a Class B digital device, pursuant to ted by wireless devices such as mobile phones.
Page 339: Climate Controls
UNDERSTANDING YOUR INSTRUMENT PANEL 337 • Increase the separation between the equipment and General Overview receiver. Buttons On The Faceplate • Consult the dealer or an experienced radio technician The buttons on the faceplate are located below the for help. Uconnect screen.
Page 340 338 UNDERSTANDING YOUR INSTRUMENT PANEL Buttons On The Touchscreen Button Descriptions (Applies To Both Buttons On The Faceplate And Buttons On The Touchscreen) Buttons on the touchscreen are accessible on the Uconnect 1. MAX A/C Button system screen. Press and release to change the current setting, the indicator illuminates when MAX A/C is ON.
Page 341 UNDERSTANDING YOUR INSTRUMENT PANEL 339 4. AUTO Operation Button 6. Rear Defrost Button Automatically controls the interior cabin temperature by Press and release this button to turn on the rear window adjusting airflow distribution and amount. Performing defroster and the heated outside mirrors (if equipped). this function will cause the system to switch between An indicator will illuminate when the rear window manual mode and automatic modes.
Page 342 340 UNDERSTANDING YOUR INSTRUMENT PANEL 8. Passenger Temperature Control Down Button CAUTION! (Continued) (Uconnect 8.4 Radio Only) • Do not use scrapers, sharp instruments, or abrasive Provides the passenger with independent temperature window cleaners on the interior surface of the control.
Page 343 UNDERSTANDING YOUR INSTRUMENT PANEL 341 10. Blower Control Blower can also be selected by pressing the blower bar area between the icons. Blower control is used to regulate the amount of air 11. Modes forced through the climate system. There are seven blower speeds available.
Page 344 342 UNDERSTANDING YOUR INSTRUMENT PANEL • Bi-Level Mode 12. Climate Control OFF Button Air comes from the instrument panel outlets Press and release this button to turn the Climate Control and floor outlets. A slight amount of air is ON/OFF. directed through the defrost and side window demis- 13.
Page 345: Climate Control Functions
UNDERSTANDING YOUR INSTRUMENT PANEL 343 14. Driver Temperature Control Up Button button to turn off the air conditioning and manually (Uconnect 8.4 Only) adjust the blower and airflow mode settings. Also, make sure to select only Panel, Bi-Level or Floor modes. Provides the driver with independent temperature con- trol.
Page 346: Automatic Temperature Control (Atc)
344 UNDERSTANDING YOUR INSTRUMENT PANEL MAX A/C selected. Press the button a second time to turn off the Recirculation mode and allow outside air into the vehicle. MAX A/C sets the control for maximum cooling perfor- mance. NOTE: In cold weather, use of recirculation mode may lead to excessive window fogging.
Page 347 UNDERSTANDING YOUR INSTRUMENT PANEL 345 • The temperature can be displayed in U.S. or Metric 2. Adjust the temperature you would like the system to maintain by adjusting the driver and passenger tem- units selecting Uconnect customer- perature buttons on the faceplate or buttons on the programmable feature.
Page 348: Operating Tips
346 UNDERSTANDING YOUR INSTRUMENT PANEL The operator can also select the direction of the airflow coolant that meets the requirements of FCA Material by selecting one of the available mode settings. A/C Standard MS.90032 and 50% water is recommended. operation and Recirculation control can also be manually Refer to “Maintenance Procedures”...
Page 349 UNDERSTANDING YOUR INSTRUMENT PANEL 347 Window Fogging Outside Air Intake Interior fogging on the windshield can be quickly re- Make sure the air intake, located directly in front of the moved by turning the mode selector to Defrost. The windshield, is free of obstructions such as leaves. Leaves Defrost/Floor mode can be used to maintain a clear collected in the air intake may reduce airflow, and if they windshield and provide sufficient heating.
Page 350 348 UNDERSTANDING YOUR INSTRUMENT PANEL Control Setting Suggestions For Various Weather Conditions...
Page 351: Personalized Menu Bar
UNDERSTANDING YOUR INSTRUMENT PANEL 349 PERSONALIZED MENU BAR 1. Press the “Apps ” button to open the App screen. The Uconnect features and services in the main menu bar 2. Press and hold, then drag the selected App to replace are easily changed for your convenience.
Page 352: Get Started
350 UNDERSTANDING YOUR INSTRUMENT PANEL Get Started All you need to control your Uconnect system with your voice are the buttons on your steering wheel. 1. Visit UconnectPhone.com to check mobile device and feature compatibility and to find phone pairing in- structions.
Page 353 UNDERSTANDING YOUR INSTRUMENT PANEL 351 4. Each time you give a Voice Command, you must first push either the VR or Phone button, wait until after the beep, then say your Voice Command. 5. You can interrupt the help message or system prompts by pushing the VR or Phone button and saying a Voice Command from current category.
Page 354: Basic Voice Commands
352 UNDERSTANDING YOUR INSTRUMENT PANEL Basic Voice Commands The basic Voice Commands below can be given at any point while using your Uconnect system. Push the VR button . After the beep, say • Cancel to stop a current voice session •...
Page 355: Radio
UNDERSTANDING YOUR INSTRUMENT PANEL 353 Radio Use your voice to quickly get to the AM, FM or SiriusXM Satellite Radio stations you would like to hear. (Subscrip- tion or included SiriusXM Satellite Radio trial required.) Push the VR button . After the beep, say •...
Page 356: Media
354 UNDERSTANDING YOUR INSTRUMENT PANEL Media TIP: Press the Browse button on the touchscreen to see all of the music on your AUX or USB device. Your Voice Uconnect offers connections via USB, SD, Bluetooth and Command must match exactly how the artist, album, auxiliary ports (If Equipped).
Page 357: Phone
UNDERSTANDING YOUR INSTRUMENT PANEL 355 Phone TIP: When providing a Voice Command, push the Phone button and say “Call,” then pronounce the name Making and answering hands-free phone calls is easy exactly as it appears in your phone book. When a with Uconnect.
Page 358: Voice Text Reply
356 UNDERSTANDING YOUR INSTRUMENT PANEL Voice Text Reply PRE-DEFINED VOICE TEXT REPLY RESPONSES Uconnect will announce incoming text messages. Push Okay. Where are you? I will be the Phone button and say Listen. (Must have com- <number> Are you there Call me.
Page 359: Climate (8.4A/8.4An)
UNDERSTANDING YOUR INSTRUMENT PANEL 357 TIP: Voice Text Reply is not compatible with iPhone, but if your vehicle is equipped with Siri Eyes Free, you can use your voice to send a text message. Climate (8.4A/8.4AN) Too hot? Too cold? Adjust vehicle temperatures hands- free and keep everyone comfortable while you keep moving ahead.
Page 360: Navigation (8.4A/8.4An)
358 UNDERSTANDING YOUR INSTRUMENT PANEL TIP: Voice Command for Climate may only be used to Navigation (8.4A/8.4AN) adjust the interior temperature of your vehicle. Voice The Uconnect navigation feature helps you save time and Command will not work to adjust the heated seats or become more productive when you know exactly how to steering wheel if equipped.
Page 361: Uconnect Access (8.4A/8.4An)
UNDERSTANDING YOUR INSTRUMENT PANEL 359 TIP: To start a POI search, push the VR button . After Uconnect Access (8.4A/8.4AN) the beep, say: “ Find nearest coffee shop.” WARNING! ALWAYS obey traffic laws and pay attention to the road. Some Uconnect Access services, including 9-1-1 and Assist, will NOT work without an operable 1X (voice/data) or 3G (data) network connection.
Page 362: Vehicle Health Alert
360 UNDERSTANDING YOUR INSTRUMENT PANEL NOTE: Uconnect Access is available only on equipped Roadside Assistance Call vehicles purchased within the continental United States, WiFi Hotspot*** Alaska and Hawaii. Services can only be used where **If vehicle is equipped. coverage is available; see coverage map for details. ***Extra charges apply.
Page 363: Register (8.4A/8.4An)
UNDERSTANDING YOUR INSTRUMENT PANEL 361 Register (8.4A/8.4AN) 2. Press the “Uconnect Care” button on the touchscreen. To unlock the full potential of Uconnect Access in your 3. A helpful Uconnect Care Agent will register your vehicle, you first need to register with Uconnect Access. vehicle and handle all of the details.
Page 364: Understanding Your Instrument Panel
362 UNDERSTANDING YOUR INSTRUMENT PANEL Mobile App (8.4A/8.4AN) To link your internet radio accounts: You’re only a few steps away from using remote com- 1. Download the Uconnect Access App to your mobile mands and playing your favorite music in your vehicle. device.
Page 365: Voice Texting (8.4A/8.4An)
UNDERSTANDING YOUR INSTRUMENT PANEL 363 NOTE: Voice Texting (8.4A/8.4AN) • You can also complete this process on the web. Simply 1. To send a message, push the Phone button . After visit moparownerconnect.com log in and click Set Up the beep, say the following command: “Send mes- Via Mobile Profile (under Quick Links).
Page 366 364 UNDERSTANDING YOUR INSTRUMENT PANEL You must be registered with Uconnect Access and have a compatible MAP – enabled smartphone to use your voice to send a personalized text message. For details about MAP, visit UconnectPhone.com. Apple iPhone iOS6 or later supports reading incoming text messages only.
Page 367: Yelp (8.4A/8.4An)
UNDERSTANDING YOUR INSTRUMENT PANEL 365 TIP: Yelp (8.4A/8.4AN) • Voice Texting is not compatible with iPhone, but if Once registered with Uconnect Access, you can use your voice to search for the most popular places or things your vehicle is equipped with Siri Eyes Free, you can around you.
Page 368: Siriusxm Travel Link (8.4A/8.4An)
366 UNDERSTANDING YOUR INSTRUMENT PANEL TIP: Once you perform a search, you can reorganize the SiriusXM Travel Link (8.4A/8.4AN) results by selecting either the Best Match, Rating or Need to find a gas station, view local movie listings, Distance tab on the top of the touchscreen display. check a sports score or the 5 - day weather forecast? SiriusXM Travel Link is a suite of services that brings a wealth of information right to your Uconnect 8.4AN...
Page 369: Siri Eyes Free - If Equipped
UNDERSTANDING YOUR INSTRUMENT PANEL 367 TIP: Traffic alerts are not accessible with Voice Com- Siri Eyes Free — If Equipped mand. If your vehicle is equipped with Siri Eyes Free, you can use your voice to send text messages, schedule meetings, set reminders, and more.
Page 370: General Information
368 UNDERSTANDING YOUR INSTRUMENT PANEL Automatic reply messages can be: General Information • “I am driving right now, I will get back to you shortly.” This device complies with FCC rules Part 15 and Industry Canada RSS-210. Operation is subject to the following •...
Page 371: Additional Information
UNDERSTANDING YOUR INSTRUMENT PANEL 369 Additional Information © 2015 FCA US LLC. All rights reserved. Mopar and Uconnect are registered trademarks and Mopar Owner Connect is a trademark of FCA US LLC. Android is a trademark of Google Inc. SiriusXM and all related marks and logos are trademarks of SiriusXM Radio Inc.
Page 373 STARTING AND OPERATING CONTENTS STARTING PROCEDURES ....375 MANUAL TRANSMISSION — IF EQUIPPED . .383 ▫ Manual Transmission — If Equipped ..375 ▫...
Page 374 372 STARTING AND OPERATING AUTOSTICK ......397 POWER STEERING — 6.4L ENGINE ..417 ▫...
Page 375 STARTING AND OPERATING 373 ▫ Traction Control System (TCS) ... .429 ▫ Radial Ply Tires ..... .451 ▫...
Page 376 374 STARTING AND OPERATING TIRE PRESSURE MONITOR SYSTEM (TPMS) . .459 ADDING FUEL ......470 ▫ Premium System ..... .462 ▫...
Page 377: Starting Procedures
STARTING AND OPERATING 375 STARTING PROCEDURES WARNING! (Continued) Before starting your vehicle, adjust your seat, adjust the • Do not leave the Key Fob in or near the vehicle (or inside and outside mirrors, fasten your seat belt, and if in a location accessible to children), and do not present, instruct all other occupants to buckle their seat leave the ignition (of a vehicle equipped with...
Page 378: Automatic Transmission - If Equipped
376 STARTING AND OPERATING Normal Starting With Integrated Key — Manual WARNING! (Continued) Transmission can be dangerous if done improperly, so follow the Normal starting of either a cold or a warm engine does procedure carefully. Refer to “Jump-Starting” in “What not require pumping or pressing the accelerator pedal.
Page 379: Keyless Enter-N-Go - Ignition
STARTING AND OPERATING 377 motor will continue to run, and it will disengage auto- CAUTION! (Continued) matically when the engine is running. If the engine fails • Shift into PARK only after the vehicle has come to to start, the starter will disengage automatically in 10 a complete stop.
Page 380: Normal Starting
378 STARTING AND OPERATING Normal Starting Using The ENGINE START/STOP Button — Manual Transmission Only Using The ENGINE START/STOP Button — Automatic Transmission Only 1. Press and hold the clutch pedal while pushing and holding the ENGINE START/STOP button. 1. The transmission must be in PARK or NEUTRAL. 2.
Page 381 STARTING AND OPERATING 379 To Turn Off The Engine Using ENGINE Never leave a vehicle out of the PARK position, or it START/STOP Button — Automatic Transmission could roll. Only NOTE: If the ignition switch is left in the ACC or RUN 1.
Page 382 380 STARTING AND OPERATING NOTE: Keyless Enter-N-Go Functions — With Driver’s Foot OFF The Brake Pedal/Clutch Pedal (In PARK • If the ignition switch is left in the ACC position, the Or NEUTRAL Position) system will automatically time out after 30 minutes of The Keyless Enter-N-Go feature operates similar to an inactivity and the ignition will switch to the OFF ignition switch.
Page 383: Extreme Cold Weather
STARTING AND OPERATING 381 Extreme Cold Weather (Below –22°F Or −30°C) WARNING! (Continued) To ensure reliable starting at these temperatures, use of engine has started, ignite and damage the converter an externally powered electric engine block heater (avail- and vehicle. able from your authorized dealer) is recommended.
Page 384: After Starting
382 STARTING AND OPERATING the way to the floor and hold it, then push and release the After Starting ENGINE START/STOP button once. The starter motor The idle speed is controlled automatically, and it will will engage automatically, run for 10 seconds, and then decrease as the engine warms up.
Page 385: Manual Transmission - If Equipped
STARTING AND OPERATING 383 WARNING! CAUTION! • Never drive with your foot resting on the clutch Remember to disconnect the engine block heater cord before driving. Damage to the 110-115 Volt pedal, or try to hold the vehicle on a hill with the electrical cord could cause electrocution.
Page 386 384 STARTING AND OPERATING NOTE: During cold weather, you may experience in- NOTE: creased effort in shifting until the transmission fluid • Your vehicle is equipped with a transmission reverse warms up. This is normal. inhibitor system. When vehicle speed is greater than 3 mph (5 km/h), the reverse inhibitor activates to help prevent shifts into REVERSE.
Page 387: Shifting
STARTING AND OPERATING 385 Also, this may be more noticeable when the transmis- sion is warm. This is a normal condition and is not an indication of a problem with your clutch or transmis- sion. Shifting Fully press the clutch pedal and lift your foot off the accelerator pedal before shifting gears.
Page 388: Recommended Shift Speeds
386 STARTING AND OPERATING The spring will try to pull the gear selector toward third You must always use first gear (or REVERSE) when and fourth gear. Make sure you move the gear selector starting from a standing position. into second or fifth gear. If you let the gear selector move Recommended Shift Speeds in the direction of the pulling, you may end shifting from To utilize your manual transmission efficiently for fuel...
Page 389: 1-4 Skip Shift
STARTING AND OPERATING 387 Earlier upshifts during cruise conditions (relatively steady Downshifting speeds) may result in increased fuel economy. To maintain a safe speed and prolong brake life, downshift Higher upshift speeds may be used to obtain a desired to maintain a safe speed when descending a steep grade. acceleration rate.
Page 390: Automatic Transmission
388 STARTING AND OPERATING AUTOMATIC TRANSMISSION WARNING! (Continued) transmission into FIRST gear or REVERSE, apply WARNING! the parking brake, turn the engine OFF, remove the • It is dangerous to shift out of PARK or NEUTRAL key fob from the vehicle and lock your vehicle. if the engine speed is higher than idle speed.
Page 391: Key Ignition Park Interlock
STARTING AND OPERATING 389 NOTE: You must press and hold the brake pedal while WARNING! (Continued) shifting out of PARK. • Do not leave the Key Fob in or near the vehicle (or Key Ignition Park Interlock in a location accessible to children), and do not leave the ignition in the ACC or ON/RUN mode.
Page 392: Eight-Speed Automatic Transmission - If Equipped
390 STARTING AND OPERATING The brake pedal must also be pressed to shift from NEUTRAL into DRIVE or REVERSE when the vehicle is stopped or moving at low speeds. Eight-Speed Automatic Transmission — If Equipped The transmission gear range (PRNDM) is displayed both on the gear selector and in the Driver Information Display (DID).
Page 393 STARTING AND OPERATING 391 Only shift from DRIVE to PARK or REVERSE when the the instrument cluster (as M1, M2, M3, etc.). Move the accelerator pedal is released and the vehicle is stopped. gear selector to the right (into the DRIVE [D] position) for Be sure to keep your foot on the brake pedal when access to PARK, REVERSE, and NEUTRAL.
Page 394 392 STARTING AND OPERATING When parking on a level surface, you may shift the WARNING! (Continued) transmission into PARK first, and then apply the parking selector out of PARK with the brake pedal released. brake. Make sure the automatic transmission is in PARK When parking on a hill, apply the parking brake before before leaving the vehicle.
Page 395 STARTING AND OPERATING 393 WARNING! (Continued) WARNING! (Continued) • Do not leave the key fob in or near the vehicle (or transmission into FIRST gear or REVERSE, turn the engine OFF, apply the parking brake, and in a location accessible to children), and do not remove the ignition key.
Page 396 394 STARTING AND OPERATING The following indicators should be used to ensure that NEUTRAL (N) you have engaged the transmission into the PARK posi- Use this range when the vehicle is standing for prolonged tion: periods with the engine running. Apply the parking •...
Page 397 STARTING AND OPERATING 395 Under these conditions, using a lower gear will improve CAUTION! (Continued) performance and extend transmission life by reducing severe transmission damage. Refer to “Recreational excessive shifting and heat buildup. Towing” in “Starting And Operating” and “Towing A During extremely cold temperatures (-22°F [-30°C] or Disabled Vehicle”...
Page 398 396 STARTING AND OPERATING Transmission Limp Home Mode NOTE: In cases where the instrument cluster message indicates the transmission may not re-engage after en- Transmission function is monitored electronically for gine shutdown, perform this procedure only in a desired abnormal conditions. If a condition is detected that could location (preferably, at your authorized dealer).
Page 399: Autostick
STARTING AND OPERATING 397 NOTE: Even if the transmission can be reset, we recom- This system can also provide you with more control mend that you visit your authorized dealer at your during passing, city driving, cold slippery conditions, earliest possible convenience. Your authorized dealer has mountain driving, and many other situations.
Page 400 398 STARTING AND OPERATING Operation mode will retain the current gear. The current gear will be displayed in the instrument cluster, but the M will not When the gear selector is in the DRIVE (D) position, the be highlighted. The transmission will revert back to transmission will operate automatically, shifting between normal operation (if the gear selector remains in DRIVE) the eight available gears.
Page 401 STARTING AND OPERATING 399 • If normal AutoStick mode is engaged (gear selector in • If a requested downshift would cause the engine to MANUAL position), manual gear selection will be over-speed, that shift will not occur. maintained until the gear selector is returned to •...
Page 402: Drive Modes
400 STARTING AND OPERATING or out of the AutoStick mode at any time without taking NOTE: Refer to “Drive Modes” in “Understanding Your your foot off the accelerator pedal. Instrument Panel” for further descriptions of these modes. WARNING! Do not downshift for additional engine braking on a slippery surface.
Page 403 STARTING AND OPERATING 401 • TRACK MODE — This mode is a predefined configu- selected. While in Custom Mode the Traction, Trans- ration optimized for typical track driving. The ABS, mission, Steering, Suspension and Paddle shifter set- Transmission, Steering, and Suspension systems are all tings may be configured through the custom mode set to their TRACK settings.
Page 404 402 STARTING AND OPERATING Listed below is a description of each of these settings: Traction • Track — modifies traction control to optimize track Transmission (Trans) performance with the least stability control. • Track — provides the fastest shift speeds and has the •...
Page 405 STARTING AND OPERATING 403 Steering — 6.4L Engine Only NOTE: • Track — provides the greatest amount of steering • This selection is available with the RED or BLACK feedback, requiring the highest amount of steering RKE Key Fob “500 HP”. effort.
Page 406 404 STARTING AND OPERATING • VALET MODE — To enter this mode the operator • The ESC Off button is disabled. must select it from the Drive Modes interface and enter • The Launch Control button is disabled. a four digit PIN code. The PIN code is not predeter- NOTE: mined, so the operator is free to select any four digit numeric combination that will be easy to remember.
Page 407: Launch Mode - If Equipped
STARTING AND OPERATING 405 Launch Mode — If Equipped Preconditions: • Launch Mode should not be used on public roads. This vehicle is equipped with a Launch Mode system that is designed to allow the driver to achieve maximum Always check track conditions and the surrounding vehicle acceleration in a straight line.
Page 408 406 STARTING AND OPERATING Automatic Transmission — If Equipped 4. Make sure the vehicle is not moving. Launch Mode is only available when the following 5. Make sure the steering wheel is pointing straight. procedure is followed: 6. Hold the brake and make sure the vehicle is in 1.
Page 409 STARTING AND OPERATING 407 Launch mode will be active until the vehicle reaches Manual Transmission — If Equipped 62 mph (100 km/h), at which point the ESC system will Vehicles with a manual transmission have an adjustable return to its current ESC mode. launch RPM controlled through the Uconnect system.
Page 410 408 STARTING AND OPERATING 3. Press the “Activate Launch Mode” button on the Ready Release Clutch”. Release the clutch quickly and touchscreen. continue to hold wide open throttle to launch execute shifts. Refer to “Manual Transmission – Shifting” in 4. Make sure the vehicle is not moving. this section for further information.
Page 411: Guidelines For Track Use
STARTING AND OPERATING 409 • The “ESC OFF” button is pushed to change the ESC driving situations. It is recommended that your vehicle system to another mode. operates in SPORT or TRACK modes during the track event. NOTE: After launch mode has been aborted, ESC will •...
Page 412 410 STARTING AND OPERATING • If equipped with a removable lower front fascia grille, NOTE: It is recommended that you target 40psi (276kpa) it is recommended to remove it for track use during Hot Tire Pressure at the conclusion of each track session. warm/hot weather to improve cooling airflow to Starting at 32psi (221kpa) Front &...
Page 413 STARTING AND OPERATING 411 2. Lap the track in this manner until you start smelling 6. Sometimes, a second burnish session is required. If the the brakes. Continue for another ½ lap at speed, then pads start smelling in the next track session, reduce do a two lap cool down with minimal brake applies.
Page 414: Driving On Slippery Surfaces
412 STARTING AND OPERATING DRIVING ON SLIPPERY SURFACES Traction When driving on wet or slushy roads, it is possible for a Acceleration wedge of water to build up between the tire and road Rapid acceleration on snow covered, wet, or other slip- surface.
Page 415: Driving Through Water
STARTING AND OPERATING 413 Your vehicle may be equipped with a Limited Slip Flowing/Rising Water Differential (LSD) that reduces, but does not eliminate, the amount of wheel slip across a given axle for im- WARNING! proved handling. Do not drive on, or cross, a road or a path where water is flowing and/or rising (as in storm run-off).
Page 416 414 STARTING AND OPERATING WARNING! CAUTION! • Driving through standing water limits your vehi- • Always check the depth of the standing water cle’s traction capabilities. Do not exceed 5 mph before driving through it. Never drive through (8 km/h) when driving through standing water. standing water that is deeper than the bottom of •...
Page 417: Power Steering - 6.2L Supercharged Engine
STARTING AND OPERATING 415 If for some reason the power assist is interrupted, it will CAUTION! (Continued) still be possible to steer your vehicle. Under these condi- operate the vehicle if any fluid appears contami- tions, you will observe a substantial increase in steering nated, as this may result in further damage.
Page 418: Power Steering Fluid Check
416 STARTING AND OPERATING apparent, and/or the system is not functioning as antici- WARNING! pated. Coordinate inspection efforts through an autho- rized dealer. Continued operation with reduced power steering assist could pose a safety risk to yourself and others. CAUTION! Service should be obtained as soon as possible.
Page 419: Power Steering - 6.4L Engine
STARTING AND OPERATING 417 If necessary, add fluid to restore to the proper indicated WARNING! level. With a clean cloth, wipe any spilled fluid from all surfaces. Refer to “Fluids, Lubricants, And Genuine Continued operation with reduced assist could pose Parts”...
Page 420: Fuel Saver Technology - If Equipped
418 STARTING AND OPERATING NOTE: PARKING BRAKE • Even if the power steering assistance is no longer Before leaving the vehicle, make sure that the parking brake is fully applied and place the gear selector in the operational, it is still possible to steer the vehicle. PARK or REVERSE (manual transmission only) position.
Page 421: Manual Transmission - If Equipped
STARTING AND OPERATING 419 When parking on a hill, it is important to turn the front wheels toward the curb on a downhill grade and away from the curb on an uphill grade. For vehicles equipped with an automatic transmission, apply the parking brake before placing the gear selector in PARK, otherwise the load on the transmission locking mechanism may make it difficult to move the gear selector out of PARK.
Page 422 420 STARTING AND OPERATING release the parking brake, press the park brake pedal a WARNING! second time and let your foot up as you feel the brake • Never use the PARK position of an automatic disengage. transmission as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage.
Page 423: Brake System
STARTING AND OPERATING 421 WARNING! (Continued) CAUTION! warned not to touch the parking brake, brake pedal If the “Brake Warning Light” remains on with the or the transmission gear selector. parking brake released, a brake system malfunction • Do not leave the Key Fob in or near the vehicle (or is indicated.
Page 424: Electronic Brake Control System
422 STARTING AND OPERATING In the event power assist is lost for any reason (for System (ABS), Brake Assist System (BAS), Hill Start example, repeated brake applications with the engine Assist (HSA), Traction Control System (TCS), Electronic OFF), the brakes will still function. The effort required to Stability Control (ESC), and Electronic Roll Mitigation brake the vehicle will be much greater than that required (ERM).
Page 425: Brake System Warning Light
STARTING AND OPERATING 423 Brake System Warning Light The ABS performs a self-check cycle to ensure that the ABS is working properly each time the vehicle is started The red “Brake System Warning Light” will turn on when and driven. During this self-check, you may hear a slight the ignition switch is turned to the ON position and may clicking sound as well as some related motor noises.
Page 426 424 STARTING AND OPERATING These are all normal characteristics of ABS. WARNING! (Continued) • The ABS cannot prevent the natural laws of phys- WARNING! ics from acting on the vehicle, nor can it increase • The ABS contains sophisticated electronic equip- braking or steering efficiency beyond that afforded ment that may be susceptible to interference by the condition of the vehicle brakes and tires or...
Page 427: Anti-Lock Brake Warning Light
STARTING AND OPERATING 425 Anti-Lock Brake Warning Light Brake Assist System (BAS) The amber “Anti-Lock Brake Warning Light” will turn on The BAS is designed to optimize the vehicle’s braking when the ignition switch is turned to the ON position capability during emergency braking maneuvers.
Page 428: Hill Start Assist (Hsa)
426 STARTING AND OPERATING to hold the brake pressure for a short period. If the driver WARNING! does not apply the throttle before this time expires, the The Brake Assist System (BAS) cannot prevent the system will release brake pressure and the vehicle will natural laws of physics from acting on the vehicle, roll down the hill as normal.
Page 429 STARTING AND OPERATING 427 • HSA will work in REVERSE gear and all forward WARNING! (Continued) gears. The system will not activate if the transmission safe control of your vehicle. Failure to follow these is in PARK or NEUTRAL. For vehicles equipped with warnings can result in a collision or serious personal a manual transmission, if the clutch is pressed, HSA injury.
Page 430 428 STARTING AND OPERATING Disabling And Enabling HSA WARNING! (Continued) This feature can be turned on or turned off. To change the incline while resuming acceleration, manually ac- current setting, proceed as follows: tivate the trailer brake or apply more vehicle brake pressure prior to releasing the brake pedal.
Page 431: Traction Control System (Tcs)
STARTING AND OPERATING 429 3. Apply the parking brake. Traction Control System (TCS) This system monitors the amount of wheel spin of each of 4. Start the engine. the driven wheels. If wheel spin is detected, the TCS may 5. Rotate the steering wheel slightly more than one-half apply brake pressure to the spinning wheel(s) and/or turn to the left.
Page 432 430 STARTING AND OPERATING counteracting the oversteer or understeer condition. En- Light” begins to flash during acceleration, ease up on the gine power may also be reduced to help the vehicle accelerator and apply as little throttle as possible. Be sure maintain the desired path.
Page 433 STARTING AND OPERATING 431 ESC Operating Modes WARNING! (Continued) NOTE: Depending upon model and mode of operation, must never be exploited in a reckless or dangerous the ESC system may have multiple operating modes. manner which could jeopardize the user’s safety or the safety of others.
Page 434 432 STARTING AND OPERATING To enter the “Partial Off” mode, momentarily push the NOTE: “ESC Off” switch and the “ESC Off Indicator Light” will • For vehicles with multiple partial ESC modes a mo- illuminate. To turn the ESC on again, momentarily push mentary button push will toggle the ESC mode.
Page 435 STARTING AND OPERATING 433 “ESC OFF” message will display in the Driver Informa- WARNING! (Continued) tion Display (DID). To turn ESC ON again, momentarily evasive maneuver, the ESC system will not engage push the “ESC Off” switch. to assist in maintaining stability. “ESC Off” mode NOTE: System may switch from ESC Full Off to Partial is intended for off-highway or off-road use only.
Page 436 434 STARTING AND OPERATING speeds greater than 30 mph (48 km/h), see your autho- NOTE: rized dealer as soon as possible to have the problem • The “ESC Activation/Malfunction Indicator Light” diagnosed and corrected. and the “ESC OFF Indicator Light” come on momen- The “ESC Activation/Malfunction Indicator Light”...
Page 437: Electronic Roll Mitigation (Erm)
STARTING AND OPERATING 435 Electronic Roll Mitigation (ERM) NOTE: ERM is disabled anytime the ESC is in “Full Off” mode (if equipped). Refer to “Electronic Stability Control This system anticipates the potential for wheel lift by (ESC)” in this section for a complete explanation of the monitoring the driver’s steering wheel input and the available ESC modes.
Page 438: Ready Alert Braking (Rab)
436 STARTING AND OPERATING Ready Alert Braking (RAB) TIRE SAFETY INFORMATION Ready Alert Braking may reduce the time required to Tire Markings reach full braking during emergency braking situations. It anticipates when an emergency braking situation may occur by monitoring how fast the throttle is released by the driver.
Page 439 STARTING AND OPERATING 437 • Temporary spare tires are designed for temporary NOTE: emergency use only. Temporary high pressure com- • P (Passenger) — Metric tire sizing is based on U.S. pact spare tires have the letter “T” or “S” molded into design standards.
Page 440 438 STARTING AND OPERATING Tire Sizing Chart EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on U.S. design standards, or ..blank..= Passenger car tire based on European design standards, or LT = Light truck tire based on U.S.
Page 441 STARTING AND OPERATING 439 EXAMPLE: R = Construction code – R means radial construction, or – D means diagonal or bias construction 15, 16, 18 = Rim diameter in inches (in) Service Description: 95 = Load Index – A numerical code associated with the maximum load a tire can carry H = Speed Symbol –...
Page 442: Tire Identification Number (Tin)
440 STARTING AND OPERATING EXAMPLE: Load Identification: Absence of the following load identification symbols on the sidewall of the tire indicates a Standard Load (SL) tire: • XL = Extra load (or reinforced) tire, or • LL = Light load tire or •...
Page 443 STARTING AND OPERATING 441 EXAMPLE: DOT MA L9 ABCD 0301 DOT = Department of Transportation – This symbol certifies that the tire is in compliance with the U.S. Department of Transportation tire safety standards and is approved for highway use MA = Code representing the tire manufacturing location (two digits) L9 = Code representing the tire size (two digits) ABCD = Code used by the tire manufacturer (one to four digits)
Page 444: Tire Terminology And Definitions
442 STARTING AND OPERATING Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after Cold Tire Inflation Pressure the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a minimum of three hours.
Page 445: Tire Loading And Tire Pressure
STARTING AND OPERATING 443 Tire Loading And Tire Pressure Tire And Loading Information Placard Location NOTE: The proper cold tire inflation pressure is listed on the driver’s side B-Pillar or the rear edge of the driver’s side door. Example Tire Placard Location (B-Pillar) Example Tire Placard Location (Door)
Page 446 444 STARTING AND OPERATING Tire And Loading Information Placard This placard tells you important information about the: 1. Number of people that can be carried in the vehicle. 2. Total weight your vehicle can carry. 3. Tire size designed for your vehicle. 4.
Page 447 STARTING AND OPERATING 445 NOTE: Under a maximum loaded vehicle condition, Steps For Determining Correct Load Limit gross axle weight ratings (GAWRs) for the front and rear 1. Locate the statement “The combined weight of occu- axles must not be exceeded. For further information on pants and cargo should never exceed XXX lbs or GAWRs, vehicle loading, and trailer towing, refer to XXX kg”...
Page 448 446 STARTING AND OPERATING 4. The resulting figure equals the available amount of NOTE: cargo and luggage load capacity. For example, if • If your vehicle will be towing a trailer, load from your “XXX” amount equals 1,400 lbs (635 kg) and there will trailer will be transferred to your vehicle.
Page 449 STARTING AND OPERATING 447...
Page 450: Tires - General Information
448 STARTING AND OPERATING Safety WARNING! WARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and • Improperly inflated tires are dangerous and can increase your stopping distance. Use tires of the cause collisions. recommended load capacity for your vehicle.
Page 451: Tire Inflation Pressures
STARTING AND OPERATING 449 Ride Comfort And Vehicle Stability WARNING! (Continued) Proper tire inflation contributes to a comfortable ride. • Always drive with each tire inflated to the recom- Over-inflation produces a jarring and uncomfortable mended cold tire inflation pressure. ride.
Page 452 450 STARTING AND OPERATING Tire pressures change by approximately 1 psi (7 kPa) per CAUTION! 12°F (7°C) of air temperature change. Keep this in mind when checking tire pressure inside a garage, especially in After inspecting or adjusting the tire pressure, al- the Winter.
Page 453: Radial Ply Tires
STARTING AND OPERATING 451 speeds, maintaining correct tire inflation pressure is very Radial Ply Tires important. Increased tire pressure and reduced vehicle loading may be required for high-speed vehicle opera- WARNING! tion. Refer to your authorized tire dealer or original Combining radial ply tires with other types of tires equipment vehicle dealer for recommended safe operat- on your vehicle will cause your vehicle to handle...
Page 454: All Season Tires - If Equipped
452 STARTING AND OPERATING Consult an authorized tire dealer for tire repairs and Summer Or Three Season Tires — If Equipped additional information. Summer tires provide traction in both wet and dry Damaged Run Flat tires, or Run Flat tires that have conditions, and are not intended to be driven in snow or experienced a loss of pressure should be replaced imme- on ice.
Page 455: Snow Tires
STARTING AND OPERATING 453 Snow tires generally have lower speed ratings than what WARNING! was originally equipped with your vehicle and should not be operated at sustained speeds over 75 mph Do not use Summer tires in snow/ice conditions. You (120 km/h).
Page 456: Tread Wear Indicators
454 STARTING AND OPERATING Refer to “Freeing A Stuck Vehicle” in “What To Do In Emergencies” for further information. WARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure some- one.
Page 457: Life Of Tire
STARTING AND OPERATING 455 • Performance tires, tires with a speed rating of V or These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth higher, and Summer tires typically have a reduced becomes a 1/16 of an inch (1.6 mm).
Page 458: Replacement Tires
456 STARTING AND OPERATING Replacement Tires affect your vehicle’s handling. If you ever replace a wheel, make sure that the wheel’s specifications match The tires on your new vehicle provide a balance of many those of the original wheels. characteristics. They should be inspected regularly for wear and correct cold tire inflation pressures.
Page 459: Tire Chains (Traction Devices)
STARTING AND OPERATING 457 WARNING! (Continued) CAUTION! braking of your vehicle. This can cause unpredict- Replacing original tires with tires of a different size able handling and stress to steering and suspen- may result in false speedometer and odometer read- sion components.
Page 460: Tire Rotation Recommendations
458 STARTING AND OPERATING TIRE ROTATION RECOMMENDATIONS Tire Rotation — Same Tire Size On Front And Rear Axle The tires on the front and rear of your vehicle operate at different loads and perform different steering, driving, The suggested rotation method for vehicles equipped and braking functions.
Page 461: Tire Rotation - Different Tire Size On Front And Rear Axle
STARTING AND OPERATING 459 Tire Rotation — Different Tire Size On Front And TIRE PRESSURE MONITOR SYSTEM (TPMS) Rear Axle The Tire Pressure Monitor System (TPMS) will warn the The suggested rotation method is the “side-to-side” as driver of a low tire pressure based on the vehicle recom- shown in the following diagram.
Page 462 460 STARTING AND OPERATING The TPMS will warn the driver of a low tire pressure if NOTE: When filling warm tires, the tire pressure may the tire pressure falls below the low-pressure warning need to be increased up to an additional 4 psi (30 kPa) limit for any reason, including low temperature effects above the recommended cold placard pressure in order and natural pressure loss through the tire.
Page 463 STARTING AND OPERATING 461 CAUTION! CAUTION! (Continued) prevent moisture and dirt from entering the valve • The TPMS has been optimized for the original stem, which could damage the TPM sensor. equipment tires and wheels. TPMS pressures and warnings have been established for the tire size NOTE: equipped on your vehicle.
Page 464: Premium System
462 STARTING AND OPERATING • The TPMS is not a substitute for proper tire mainte- nance, and it is the driver’s responsibility to maintain correct tire pressure using an accurate tire pressure gauge, even if under-inflation has not reached the level to trigger illumination of the TPM Telltale Light.
Page 465 STARTING AND OPERATING 463 The TPMS consists of the following components: Should this occur, you should stop as soon as possible and inflate all of the tires with a low pressure condition • Receiver module, (those shown in a different color in the DID graphic) to •...
Page 466 464 STARTING AND OPERATING Service TPMS Warning 2. Installing aftermarket window tinting that contains materials that may block radio wave signals. If a system fault is detected, the “TPM Telltale Light” will flash on and off for 75 seconds and then remain on solid. 3.
Page 467: General Information
STARTING AND OPERATING 465 3. After driving the vehicle for up to 10 minutes above low-pressure warning limit in any of the four active 15 mph (24 km/h), the “TPM Telltale Light” will flash road tires. The vehicle may need to be driven for up to on and off for 75 seconds and then remain on solid.
Page 468: Fuel Requirements
466 STARTING AND OPERATING FUEL REQUIREMENTS octane number can cause engine failure and may void or not be covered by the New Vehicle Limited Warranty. 6.2L Supercharged And 6.4L Engine Poor quality gasoline can cause problems such as hard starting, stalling, and hesitations. If you experience these These engine are designed to meet all symptoms, try another brand of gasoline before consid- emissions regulations, provide opti-...
Page 469: Gasoline/Oxygenate Blends
STARTING AND OPERATING 467 Gasoline/Oxygenate Blends are not the responsibility of the manufacturer and may void or not be covered under New Vehicle Limited Some fuel suppliers blend unleaded gasoline with oxy- Warranty. genates such as ethanol. Modifications that allow the engine to run on com- CAUTION! pressed natural gas (CNG) or liquid propane (LP) may result in damage to the engine, emissions, and fuel...
Page 470: Mmt In Gasoline
468 STARTING AND OPERATING If a Non-FFV vehicle is inadvertently fueled with E-85 without MMT be used in your vehicle. The MMT content fuel, the engine will have some or all of these symptoms: of gasoline may not be indicated on the gasoline pump, therefore, you should ask your gasoline retailer whether •...
Page 471: Fuel System Cautions
STARTING AND OPERATING 469 Visit www.toptiergas.com for a list of TOP TIER Deter- CAUTION! (Continued) gent Gasoline Retailers. • An out-of-tune engine or certain fuel or ignition Indiscriminate use of fuel system cleaning agents should malfunctions can cause the catalytic converter to be avoided.
Page 472: Carbon Monoxide Warnings
470 STARTING AND OPERATING NOTE: Intentional tampering with the emissions control WARNING! (Continued) system can result in civil penalties being assessed against running for more than a short period, adjust the you. ventilation system to force fresh, outside air into Carbon Monoxide Warnings the vehicle.
Page 473 STARTING AND OPERATING 471 CAUTION! • Damage to the fuel system or emissions control system could result from using an improper fuel tank filler tube cap. • A poorly fitting fuel filler cap could let impurities into the fuel system. •...
Page 474: Loose Fuel Filler Cap Message
472 STARTING AND OPERATING Loose Fuel Filler Cap Message WARNING! (Continued) If the vehicle diagnostic system determines that the fuel • Never add fuel to the vehicle when the engine is filler cap is loose, improperly installed, or damaged, a running.
Page 475: Vehicle Loading
STARTING AND OPERATING 473 • Gross Vehicle Weight Rating (GVWR) VEHICLE LOADING • Gross Axle Weight Rating (GAWR) front The load carrying capacity of your vehicle is shown on the “Vehicle Certification Label”. This information • Gross Axle Weight Rating (GAWR) rear should be used for passenger and luggage loading as •...
Page 476: Gross Axle Weight Rating (Gawr)
474 STARTING AND OPERATING Gross Axle Weight Rating (GAWR) Overloading The GAWR is the maximum capacity of the front and rear The load carrying components (axle, springs, tires, axles. Distribute the load over the front and rear axles wheels, etc.) of your vehicle will provide satisfactory evenly.
Page 477: Loading
STARTING AND OPERATING 475 Loading NOTE: Refer to the “Vehicle Certification Label” affixed to the rear of the driver’s door for your vehicle’s GVWR To load your vehicle properly, first figure out its empty and GAWRs. weight, axle-by-axle and side-by-side. Store heavier items down low and be sure you distribute their weight as TRAILER TOWING evenly as possible.
Page 478: Recreational Towing (Behind Motorhome, Etc.)
476 STARTING AND OPERATING RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) Towing This Vehicle Behind Another Vehicle Towing Condition Wheels OFF The Ground All Models Flat Tow None NOT ALLOWED Dolly Tow Front NOT ALLOWED Rear NOT RECOMMENDED On Trailer Recreational towing (with rear wheels on the ground) is Use of a towing dolly (with rear wheels on the ground) is NOT ALLOWED.
Page 479 STARTING AND OPERATING 477 CAUTION! Towing this vehicle in violation of the above require- ments can cause severe transmission damage. Dam- age from improper towing is not covered under the New Vehicle Limited Warranty.
Page 481 WHAT TO DO IN EMERGENCIES CONTENTS ▫ Sealing A Tire With Tire Service Kit ..488 HAZARD WARNING FLASHERS ...480 IF YOUR ENGINE OVERHEATS ... .480 JUMP-STARTING PROCEDURES .
Page 482: Hazard Warning Flashers
480 WHAT TO DO IN EMERGENCIES HAZARD WARNING FLASHERS NOTE: With extended use the Hazard Warning flashers may wear down your battery. The Hazard Warning flasher switch is located in the switch bank near the bottom center of the instrument IF YOUR ENGINE OVERHEATS panel.
Page 483: Wheel And Tire Torque Specifications
WHAT TO DO IN EMERGENCIES 481 • You can also turn the temperature control to maximum WARNING! heat, the mode control to floor and the blower control to high. This allows the heater core to act as a You or others can be badly burned by hot engine supplement to the radiator and aids in removing heat coolant (antifreeze) or steam from your radiator.
Page 484: Torque Specifications
482 WHAT TO DO IN EMERGENCIES Torque Specifications Lug Nut/Bolt Torque **Lug Nut/ Lug Nut/ Bolt Size Bolt Socket Size 111 Ft-Lbs (150 N·m) M14 x 1.50 22 mm **Use only your Authorized Dealer recommended lug nuts/bolts and clean or remove any dirt or oil before tightening.
Page 485: Tire Service Kit - If Equipped
WHAT TO DO IN EMERGENCIES 483 WARNING! To avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered. Failure to follow this warning may result in personal injury. TIRE SERVICE KIT —...
Page 486: Tire Service Kit Storage
484 WHAT TO DO IN EMERGENCIES Tire Service Kit Storage Tire Service Kit Components And Operation The Tire Service Kit is located in the trunk. Tire Service Kit Components Tire Service Kit Location 1 — Sealant Bottle 5 — Mode Select Knob 2 —...
Page 487: Tire Service Kit Usage Precautions
WHAT TO DO IN EMERGENCIES 485 Using The Mode Select Knob And Hoses Using The Power Button Your Tire Service Kit is equipped with the following Push and release the Power Button (4) once to symbols to indicate the air or sealant mode. turn On the Tire Service Kit.
Page 488 486 WHAT TO DO IN EMERGENCIES from the vehicle or tire and wheel components. Once the sealant dries, it can easily be peeled off and properly discarded. • For optimum performance, make sure the valve stem on the wheel is free of debris before connecting the Tire Service Kit.
Page 489 WHAT TO DO IN EMERGENCIES 487 WARNING! WARNING! (Continued) • Keep Tire Service Kit away from open flames or • Do not attempt to seal a tire on the side of the heat source. vehicle closest to traffic. Pull far enough off the •...
Page 490: Sealing A Tire With Tire Service Kit
488 WHAT TO DO IN EMERGENCIES on the ground. This will provide the best positioning WARNING! (Continued) of the kit when injecting the sealant into the deflated • Tire Service Kit Sealant solution contains latex. In tire and running the air pump. Move the vehicle as case of an allergic reaction or rash, consult a phy- necessary to place the valve stem in this position sician immediately.
Page 491 WHAT TO DO IN EMERGENCIES 489 4. Remove the cap from the valve stem and then screw NOTE: Sealant may leak out through the puncture in the the fitting at the end of the Sealant Hose (6) onto the tire. valve stem.
Page 492 490 WHAT TO DO IN EMERGENCIES NOTE: If the Mode Select Knob (5) is on Air Mode and If the tire does not inflate to at least 26 psi (1.8 Bar) the pump is operating, air will dispense from the Air pressure within 15 minutes: Pump Hose (7) only, not the Sealant Hose (6).
Page 493 WHAT TO DO IN EMERGENCIES 491 3. Immediately disconnect the Sealant Hose (6) from the (D) Drive Vehicle: valve stem, reinstall the cap on the fitting at the end of Immediately after injecting sealant and inflating the tire, the hose, and place the Tire Service Kit in the vehicle drive the vehicle 5 miles (8 km) or 10 minutes to ensure storage location.
Page 494 492 WHAT TO DO IN EMERGENCIES (E) After Driving: If the tire pressure is 19 psi (1.3 Bar) or higher: Pull over to a safe location. Refer to “Whenever You Stop 1. Push the Power Button (4) to turn on Tire Service Kit to Use Tire Service Kit”...
Page 495 WHAT TO DO IN EMERGENCIES 493 5. Remove the Speed Limit sticker from the instrument 3. Push the Sealant Bottle release button. The Sealant panel after the tire has been repaired. Bottle (1) will pop up. Remove the bottle and dispose of it accordingly.
Page 496: Jump-Starting Procedures
494 WHAT TO DO IN EMERGENCIES JUMP-STARTING PROCEDURES WARNING! If your vehicle has a discharged battery it can be jump- Do not attempt jump-starting if the battery is frozen. started using a set of jumper cables and a battery in It could rupture or explode and cause personal injury.
Page 497 WHAT TO DO IN EMERGENCIES 495 WARNING! • Take care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is ON. You can be injured by moving fan blades. • Remove any metal jewelry such as rings, watch bands and bracelets that could make an inadvertent electrical contact.
Page 498: Jump-Starting Procedure
496 WHAT TO DO IN EMERGENCIES 3. If using another vehicle to jump-start the battery, park CAUTION! the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF. Failure to follow these procedures could result in damage to the charging system of the booster vehicle WARNING! or the discharged vehicle.
Page 499 WHAT TO DO IN EMERGENCIES 497 2. Disconnect the opposite end of the negative (-) jumper WARNING! cable from the negative (-) post of the booster battery. Do not connect the jumper cable to the negative (-) 3. Disconnect the positive (+) end of the jumper cable post of the discharged battery.
Page 500: Freeing A Stuck Vehicle
498 WHAT TO DO IN EMERGENCIES NOTE: For vehicles with automatic transmission: Shifts CAUTION! (Continued) between DRIVE and REVERSE can only be achieved at the vehicle’s battery will discharge sufficiently to wheel speeds of 5 mph (8 km/h) or less. Whenever the degrade battery life and/or prevent the engine from transmission remains in NEUTRAL for more than 2 starting.
Page 501: Manual Park Release - 8 Speed Transmission
WHAT TO DO IN EMERGENCIES 499 NOTE: Push the ESC Off switch to place the Electronic WARNING! Stability Control (ESC) system in Partial Off mode Fast spinning tires can be dangerous. Forces gener- before rocking the vehicle. Refer to “Electronic Brake ated by excessive wheel speeds may cause damage, or Control”...
Page 502 500 WHAT TO DO IN EMERGENCIES WARNING! (Continued) Release. Activating the Manual Park Release will allow your vehicle to roll away if it is not secured by the parking brake or by proper connection to a tow vehicle. Activating the Manual Park Release on an unsecured vehicle could lead to serious injury or death for those in or around the vehicle.
Page 503 WHAT TO DO IN EMERGENCIES 501 4. Insert the screwdriver into the slot in the center of the The vehicle is now out of PARK and can be moved. lever, and disengage the lever locking tab by pushing Release the parking brake only when the vehicle is it to the right.
Page 504: Towing A Disabled Vehicle
502 WHAT TO DO IN EMERGENCIES To Reset The Manual Park Release: 3. Pull up gently on the tether strap to confirm that the lever is locked in its stowed position. 1. Push the latch (at the base of the lever, on the rear side) rearward (away from the lever) to unlatch the lever.
Page 505: Automatic Transmission
WHAT TO DO IN EMERGENCIES 503 Proper towing or lifting equipment is required to prevent CAUTION! (Continued) damage to your vehicle. Use only tow bars and other Damage to your vehicle may occur from improper equipment designed for this purpose, following equip- towing.
Page 506: Manual Transmission
504 WHAT TO DO IN EMERGENCIES • The towing distance must not exceed 30 miles (48 km). Manual Transmission • The towing speed must not exceed 30 mph (48 km/h). The manufacturer recommends towing your vehicle with all four wheels OFF the ground using a flatbed. If the transmission is not operable, or the vehicle must If flatbed equipment is not available, and the transmission be towed faster than 30 mph (48 km/h) or farther than 30...
Page 507 WHAT TO DO IN EMERGENCIES 505 CAUTION! Towing this vehicle in violation of the above require- ments can cause severe engine and/or transmission damage. Damage from improper towing is not cov- ered under the New Vehicle Limited Warranty.
Page 509 MAINTAINING YOUR VEHICLE CONTENTS ENGINE COMPARTMENT — 6.2L MAINTENANCE PROCEDURES ...516 SUPERCHARGED ..... .510 ▫...
Page 510 508 MAINTAINING YOUR VEHICLE ▫ Cooling System ..... .531 REPLACEMENT BULBS ....563 ▫...
Page 511 MAINTAINING YOUR VEHICLE 509 FLUID CAPACITIES ....568 FLUIDS, LUBRICANTS, AND GENUINE PARTS ......570 ▫...
Page 512: Engine Compartment - 6.2L Supercharged
510 MAINTAINING YOUR VEHICLE ENGINE COMPARTMENT — 6.2L SUPERCHARGED 1 — Remote Jump Start (Positive Battery Post) 7 — Engine Coolant Reservoir 2 — Remote Jump Start (Negative Battery Post) 8 — Air Cleaner Filter 3 — Intercooler Fluid Reservoir 9 —...
Page 513: Engine Compartment - 6.4L (392 Hemi)
MAINTAINING YOUR VEHICLE 511 ENGINE COMPARTMENT — 6.4L (392 HEMI) 1 — Remote Jump Start (Positive Battery Post) 6 — Engine Coolant Pressure Cap 2 — Remote Jump Start (Negative Battery Post) 7 — Engine Coolant Reservoir 3 — Engine Oil Dipstick 8 —...
Page 514: Onboard Diagnostic System - Obd Ii
512 MAINTAINING YOUR VEHICLE ONBOARD DIAGNOSTIC SYSTEM — OBD II CAUTION! Your vehicle is equipped with a sophisticated onboard • Prolonged driving with the MIL on could cause diagnostic system called OBD II. This system monitors further damage to the emission control system. It the performance of the emissions, engine, and automatic could also affect fuel economy and driveability.
Page 515: Loose Fuel Filler Cap
MAINTAINING YOUR VEHICLE 513 access this information to assist with the diagnosis and For further information, refer to “Privacy Practices — If service of your vehicle and emissions system. Equipped With Uconnect 8.4 Radio” and “Uconnect CyberSecurity” in “All About Uconnect Access” in your WARNING! Owner’s Manual Radio Supplement and “Cybersecurity”...
Page 516: Emissions Inspection And Maintenance Programs
514 MAINTAINING YOUR VEHICLE EMISSIONS INSPECTION AND MAINTENANCE Your vehicle has a simple ignition actuated test, which PROGRAMS you can use prior to going to the test station. To check if your vehicle’s OBD II system is ready, you must do the In some localities, it may be a legal requirement to pass following: an inspection of your vehicle’s emissions control system.
Page 517: Replacement Parts
MAINTAINING YOUR VEHICLE 515 the ignition or start the engine. This means that your before going to the I/M station. The I/M station can fail vehicle’s OBD II system is not ready and you should your vehicle because the MIL is on with the engine not proceed to the I/M station.
Page 518: Maintenance Procedures
516 MAINTAINING YOUR VEHICLE NOTE: Intentional tampering with emissions control Besides those maintenance items specified in the fixed systems may void your warranty and could result in civil “Maintenance Schedule”, there are other components penalties being assessed against you. which may require servicing or replacement in the future. WARNING! CAUTION! •...
Page 519: Engine Oil
MAINTAINING YOUR VEHICLE 517 (.95 liters) of oil when the reading is at the bottom of the CAUTION! (Continued) “SAFE” range will result in an oil level at the top of the transmission, or air conditioning. Such damage is “SAFE” range on these engines. not covered by the New Vehicle Limited Warranty.
Page 520 518 MAINTAINING YOUR VEHICLE Engine Oil Selection CAUTION! For best performance and maximum protection under all Do not use chemical flushes in your engine oil as the types of operating conditions, the manufacturer only chemicals can damage your engine. Such damage is recommends full synthetic engine oils that meet the not covered by the New Vehicle Limited Warranty.
Page 521 MAINTAINING YOUR VEHICLE 519 Synthetic Engine Oils Engine Oil Change Requirements — 6.2L Supercharged Engine (If Equipped) You may use synthetic engine oils provided the recom- mended oil quality requirements are met, and the recom- We recommend having your oil changed and vehicle mended maintenance intervals for oil and filter changes serviced by your authorized dealer.
Page 522 520 MAINTAINING YOUR VEHICLE To access these oil drains, the vehicle needs to be safely WARNING! (Continued) lifted and supported to remove the front underbody you have any doubt about your ability to perform a shields (belly pan). Your service technician will refer to service job, take your vehicle to a competent me- the Service Manual for proper under body shield (belly chanic.
Page 523: Engine Oil Filter
MAINTAINING YOUR VEHICLE 521 Engine Oil Filter WARNING! The engine oil filter should be replaced with a new filter The air induction system (air cleaner, hoses, etc.) can at every engine oil change. provide a measure of protection in the case of engine Engine Oil Filter Selection backfire.
Page 524: Maintenance-Free Battery
522 MAINTAINING YOUR VEHICLE Maintenance-Free Battery Your vehicle is equipped with a maintenance-free battery. You will never have to add water, nor is periodic main- tenance required. NOTE: The battery is stored under an access cover in the trunk. Remote battery terminals are located in the engine compartment for jump-starting.
Page 525 MAINTAINING YOUR VEHICLE 523 WARNING! (Continued) CAUTION! over a battery when attaching clamps. If acid • It is essential when replacing the cables on the splashes in eyes or on skin, flush the area imme- battery that the positive cable is attached to the diately with large amounts of water.
Page 526: Air Conditioner Maintenance
524 MAINTAINING YOUR VEHICLE Air Conditioner Maintenance WARNING! (Continued) For best possible performance, your air conditioner • The air conditioning system contains refrigerant should be checked and serviced by an authorized dealer under high pressure. To avoid risk of personal at the start of each warm season.
Page 527 MAINTAINING YOUR VEHICLE 525 Refrigerant Recovery And Recycling R134a — GWP (Global Warming Potential). However, the manu- If Equipped facturer recommends that air conditioning service be performed by authorized dealer or other service facilities R-134a Air Conditioning Refrigerant is a hydrofluoro- using recovery and recycling equipment.
Page 528 526 MAINTAINING YOUR VEHICLE Access Door Filter Access Cover 2. Unsnap both ends and lift the filter access cover. 3. Remove the used filter. 4. Install the new filter with arrows pointing in the direction of airflow, which is toward the rear of the vehicle (text and arrows on the filter will indicate this).
Page 529: Body Lubrication
MAINTAINING YOUR VEHICLE 527 Body Lubrication Locks and all body pivot points, including such items as seat tracks, door hinge pivot points and rollers, liftgate, tailgate, decklid, sliding doors and hood hinges, should be lubricated periodically with a lithium based grease, such as MOPAR Spray White Lube to assure quiet, easy operation and to protect against rust and wear.
Page 530: Windshield Wiper Blades
528 MAINTAINING YOUR VEHICLE Windshield Wiper Blades Adding Washer Fluid Clean the rubber edges of the wiper blades and the The windshield washer fluid reservoir is located in the windshield periodically with a sponge or soft cloth and a front of the engine compartment. Be sure to check the mild nonabrasive cleaner.
Page 531: Exhaust System
MAINTAINING YOUR VEHICLE 529 The fluid reservoir will hold nearly 1 gal (4 l) of washer have an authorized technician inspect the complete ex- fluid when the message “Low Washer Fluid” appears in haust system and adjacent body areas for broken, dam- the Driver’s Information Display (DID).
Page 532 530 MAINTAINING YOUR VEHICLE WARNING! (Continued) CAUTION! (Continued) • A hot exhaust system can start a fire if you park In the event of engine malfunction, particularly over materials that can burn. Such materials might involving engine misfire or other apparent loss of be grass or leaves coming into contact with your performance, have your vehicle serviced promptly.
Page 533: Cooling System
MAINTAINING YOUR VEHICLE 531 In unusual situations involving grossly malfunctioning NOTE: Your vehicles exhaust system may be equipped engine operation, a scorching odor may suggest severe with an Electronic Exhaust Valve (EEV) system, if the and abnormal catalyst overheating. If this occurs, stop exhaust system is replaced with aftermarket products a the vehicle, turn off the engine and allow it to cool.
Page 534 532 MAINTAINING YOUR VEHICLE tears, cuts, and tightness of the connection at the bottle WARNING! (Continued) and radiator. Inspect the entire system for leaks. do not open the hood until the radiator has had With the engine at normal operating temperature (but time to cool.
Page 535 MAINTAINING YOUR VEHICLE 533 If the engine coolant (antifreeze) is dirty or contains CAUTION! visible sediment, have an authorized dealer clean and • Mixing of engine coolant (antifreeze) other than flush with OAT coolant (antifreeze) (conforming to MS.90032). specified Organic Additive Technology (OAT) en- gine coolant (antifreeze), may result in engine NOTE: If equipped with the 6.2L Supercharged engine damage and may decrease corrosion protection.
Page 536 534 MAINTAINING YOUR VEHICLE important that you use the same engine coolant (OAT CAUTION! (Continued) coolant conforming to MS.90032) throughout the life of • Do not use water alone or alcohol-based engine your vehicle. coolant (antifreeze) products. Do not use additional Please review these recommendations for using Organic rust inhibitors or antirust products, as they may not Additive Technology (OAT) engine coolant (antifreeze)
Page 537 MAINTAINING YOUR VEHICLE 535 • Use only high purity water such as distilled or deion- • Mixing engine coolant (antifreeze) types is not recom- ized water when mixing the water/engine coolant mended and can result in cooling system damage. If (antifreeze) solution.
Page 538 536 MAINTAINING YOUR VEHICLE for your community. To prevent ingestion by animals or WARNING! children, do not store ethylene glycol-based engine coolant • Do not open hot engine cooling system. Never add in open containers or allow it to remain in puddles on the ground.
Page 539 MAINTAINING YOUR VEHICLE 537 • Do not overfill the coolant expansion bottle. When additional coolant is needed to maintain the proper level, it should be added to the coolant bottle. Do • Check the coolant freeze point in the radiator and in the not overfill.
Page 540: Brake System
538 MAINTAINING YOUR VEHICLE • Keep the front of the radiator clean. If your vehicle is WARNING! equipped with air conditioning, keep the front of the condenser clean. Riding the brakes can lead to brake failure and possibly a collision. Driving with your foot resting or •...
Page 541 MAINTAINING YOUR VEHICLE 539 Overfilling of fluid is not recommended because it may WARNING! (Continued) cause leaking in the system. can severely damage your brake system and/or Add enough fluid to bring the level up to the require- impair its performance. The proper type of brake ments described on the brake fluid reservoir.
Page 542: Clutch Hydraulic System (Manual Transmission) - If Equipped
540 MAINTAINING YOUR VEHICLE manufacturer’s recommended brake fluid. Refer to WARNING! (Continued) “Fluids, Lubricants, And Genuine Parts” in “Maintaining the brake fluid to catch fire. Brake fluid can also Your Vehicle” for further information. damage painted and vinyl surfaces, care should be Manual Transmission —...
Page 543: Automatic Transmission - If Equipped
MAINTAINING YOUR VEHICLE 541 Automatic Transmission — If Equipped Special Additives The manufacturer strongly recommends against using Selection Of Lubricant any special additives in the transmission. Automatic It is important to use the proper transmission fluid to Transmission Fluid (ATF) is an engineered product and ensure optimum transmission performance and life.
Page 544: Rear Axle
542 MAINTAINING YOUR VEHICLE Fluid Level Check Fluid And Filter Changes The fluid level is preset at the factory and does not require Under normal operating conditions, the fluid installed at adjustment under normal operating conditions. Routine the factory will provide satisfactory lubrication for the fluid level checks are not required, therefore the transmis- life of the vehicle.
Page 545: Appearance Care And Protection From Corrosion
MAINTAINING YOUR VEHICLE 543 Refer to “Fluids, Lubricants, And Genuine Parts” in The following maintenance recommendations will enable “Maintaining Your Vehicle” for further information. you to obtain maximum benefit from the corrosion resistance built into your vehicle. Change Axle Fluid What Causes Corrosion? Refer to the “Maintenance Schedule”...
Page 546 544 MAINTAINING YOUR VEHICLE Washing CAUTION! • Wash your vehicle regularly. Always wash your ve- • Do not use abrasive or strong cleaning materials hicle in the shade using MOPAR Car Wash, or a mild such as steel wool or scouring powder that will car wash soap, and rinse the panels completely with scratch metal and painted surfaces.
Page 547 MAINTAINING YOUR VEHICLE 545 • If you detect any stone chips or scratches in the paint, Wheel And Wheel Trim Care touch them up immediately. The cost of such repairs is • All wheels and wheel trim, especially aluminum and considered the responsibility of the owner.
Page 548 546 MAINTAINING YOUR VEHICLE • For tough stains, apply MOPAR Total Clean or equiva- CAUTION! lent, or a mild soap solution to a clean, damp cloth and remove the stain. Use a fresh, damp towel to remove Do not use scouring pads, steel wool, a bristle brush, soap residue.
Page 549 MAINTAINING YOUR VEHICLE 547 Your leather upholstery can be best preserved by regular CAUTION! cleaning with a damp soft cloth. Small particles of dirt can act as an abrasive and damage the leather upholstery Direct contact of air fresheners, insect repellents, and should be removed promptly with a damp cloth.
Page 550 548 MAINTAINING YOUR VEHICLE Cleaning Headlights window equipped with electric defrosters or the right rear quarter window equipped with the radio antenna. Your vehicle has plastic headlights that are lighter and Do not use scrapers or other sharp instruments that may less susceptible to stone breakage than glass headlights.
Page 551: Fuses
MAINTAINING YOUR VEHICLE 549 Seat Belt Maintenance WARNING! (Continued) Do not bleach, dye, or clean the belts with chemical assemblies must be replaced after a collision if they solvents or abrasive cleaners. This will weaken the fabric. have been damaged (i.e., bent retractor, torn web- Sun damage can also weaken the fabric.
Page 552: Front Power Distribution Center (Fuses)
550 MAINTAINING YOUR VEHICLE Front Power Distribution Center (Fuses) WARNING! (Continued) The Front Power Distribution Center is located in the fuse of higher amp rating. Never replace a blown engine compartment. This module contains fuses and fuse with metal wires or any other material. Failure relays.
Page 553 MAINTAINING YOUR VEHICLE 551 CAUTION! CAUTION! (Continued) • When replacing a blown fuse, it is important to use • When installing the power distribution center only a fuse having the correct amperage rating. The cover, it is important to ensure the cover is properly use of a fuse with a rating other than indicated may positioned and fully latched.
Page 554 552 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description 40 Amp Green – Electronic Stability Control 30 Amp Pink – Electronic Stability Control 20 Amp Blue – Police Ignition Run / ACC #1 20 Amp Blue – Police Ignition Run / ACC # 2 –...
Page 555 MAINTAINING YOUR VEHICLE 553 Cavity Cartridge Fuse Mini-Fuse Description 50 Amp Red – Electric Power Steering #2 – If Equipped / Radiator Fan (6.2L Supercharged) 30 Amp Pink – Wiper Motor 30 Amp Pink – Headlamp Washers – If Equipped 20 Amp Blue –...
Page 556 554 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description – – Fuse – Spare – 25 Amp Clear Engine Module – – Fuse – Spare – – Fuse – Spare – 25 Amp Clear Powertrain #1 – 20 Amp Yellow Powertrain #2 –...
Page 557 MAINTAINING YOUR VEHICLE 555 Cavity Cartridge Fuse Mini-Fuse Description – 10 Amp Red EPS (Challenger) / EHPS (Police)/AC Clutch Relay / Vacuum Pump Relay / Fuel Pump Relay (Challenger) / Rad Fan Relays (Challenger) – 10 Amp Red AWD Module (Charger/300) / Front Axle Disconnect (Charger/300) / Adaptive Cruise (Challenger) –...
Page 558: Rear Power Distribution Center (Fuses)
556 MAINTAINING YOUR VEHICLE Rear Power Distribution Center (Fuses) CAUTION! There is also a power distribution center located in the • When installing the power distribution center trunk under the spare tire access panel. This center cover, it is important to ensure the cover is properly contains fuses and relays.
Page 559 MAINTAINING YOUR VEHICLE 557 Cavity Cartridge Fuse Mini-Fuse Description 60 Amp Yellow – Front PDC Feed #1 – – Fuse – Spare 60 Amp Yellow – Front PDC Feed #2 30 Amp Pink – Sunroof/Dome Lamp – Police 20 Amp Blue – Police 40 Amp Green –...
Page 560 558 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description – – Fuse – Spare 30 Amp Pink – Mod Network Interface – Police – – Fuse – Spare – – Fuse – Spare 30 Amp Pink – Fuel Pump – 20 Amp Yellow –...
Page 561 MAINTAINING YOUR VEHICLE 559 Cavity Cartridge Fuse Mini-Fuse Description – 15 Amp Blue Ignition Switch/RF Hub Module/ Steering Column Lock (300) – If Equipped – 10 Amp Red Steering Column Module/Clock (300) – 5 Amp Tan Battery Sensor – 15 Amp Blue Electronic Exhaust Valve –...
Page 562 560 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description – 10 Amp Red Park Assist / Blind Spot / Rear View Camera – 15 Amp Blue Cluster / Rearview Mirror / Compass (Charger/300) / Humidity Sensor – – Fuse – Spare –...
Page 563 MAINTAINING YOUR VEHICLE 561 Cavity Cartridge Fuse Mini-Fuse Description – 10 Amp Red HVAC Module/In Vehicle Tempera- ture Sensor – – Fuse – Spare – – Fuse – Spare – – Fuse – Spare – – Fuse – Spare – 10 Amp Red Airbag Module –...
Page 564 562 MAINTAINING YOUR VEHICLE Cavity Cartridge Fuse Mini-Fuse Description – – Fuse – Spare – 10 Amp Red Rain and Light Sensor / Sunroof / Inside RR View Mirror / Power Outlet Illumination (Center Console) / Police Run Acc Relay –...
Page 565: Vehicle Storage
MAINTAINING YOUR VEHICLE 563 VEHICLE STORAGE Interior Bulbs Bulb Number If you are leaving your vehicle dormant for more than 21 days, you may want to take these steps to protect your Rear Courtesy/Reading battery. Lamps • Disconnect the negative cable from the battery. Rear Compartment (Trunk) Lamp •...
Page 566 564 MAINTAINING YOUR VEHICLE Exterior Bulbs Bulb Number Bulb Number Backup Lamp LED (Serviced at Autho- Headlamp – High Inten- D3S (Serviced at Autho- rized Dealer) sity Discharge (HID) rized Dealer) * Center High-Mount Stop LED (Serviced at Autho- Halogen Headlamp HIR2LL Lamp (CHMSL) rized Dealer)
Page 567: Bulb Replacement
MAINTAINING YOUR VEHICLE 565 BULB REPLACEMENT 4. Turn the headlamp access cap counterclockwise to remove. NOTE: Lens fogging can occur under certain atmo- spheric conditions. This will usually clear as atmospheric 5. Remove bulb by turning it counter clockwise and conditions change to allow the condensation to change disconnect.
Page 568: Low Beam Headlamp, High Beam Headlamp, And Park/Turn Lamp - Models With High Intensity
566 MAINTAINING YOUR VEHICLE 3. Remove one fastener on the lower air box to remove Low Beam Headlamp, High Beam Headlamp, and and access the rear of the headlamp assembly. Park/Turn Lamp — Models With High Intensity Discharge (HID) Headlamps — If Equipped 4.
Page 569: Front/Rear Side Marker Lamp
MAINTAINING YOUR VEHICLE 567 NOTE: On vehicles equipped with HID headlamps, Center Tail/Backup Lamp when the headlamps are turned on, there is a blue hue to The Center Tail/Backup Lamp use LED lamps that are the lamps. This diminishes and becomes more white after not serviceable separately.
Page 570: Fluid Capacities
568 MAINTAINING YOUR VEHICLE FLUID CAPACITIES Fluid Capacities — SRT 6.2L U.S. Metric Fuel (Approximate) 91 Octane or higher, 0-15% Ethanol 18.5 Gallons 70 Liters Engine Oil With Filter SAE 0W-40, Synthetic API Certified 6 Quarts 5.68 Liters Cooling System * Engine: MOPAR Antifreeze/Engine Coolant (OAT coolant con- 15 Quarts 14.4 Liters...
Page 571: Fluid Capacities - Srt 6.4L
MAINTAINING YOUR VEHICLE 569 Fluid Capacities — SRT 6.4L U.S. Metric Fuel (Approximate) 91 Octane or higher, 0-15% Ethanol 18.5 Gallons 70 Liters Engine Oil With Filter SAE 0W-40, Synthetic API Certified 7 Quarts 6.6 Liters Cooling System * MOPAR Antifreeze/Engine Coolant (OAT coolant conforming to 15 Quarts 14.4 Liters MS.90032) 10 Year/150,000 Mile Formula or equivalent...
Page 572: Fluids, Lubricants, And Genuine Parts
570 MAINTAINING YOUR VEHICLE FLUIDS, LUBRICANTS, AND GENUINE PARTS CAUTION! (Continued) Important Information system in an emergency, the cooling system will need to be drained, flushed, and refilled with fresh CAUTION! OAT coolant (conforming to MS.90032), by an au- thorized dealer as soon as possible. •...
Page 573: Engine
MAINTAINING YOUR VEHICLE 571 Engine Component Fluid, Lubricant, or Genuine Part Engine/Intercooler Coolant We recommend you use MOPAR Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT coolant conforming to MS.90032. Engine Oil For best performance and maximum protection under all types of operating conditions, the manufacturer only recommends full synthetic engine oils.
Page 574: Chassis
572 MAINTAINING YOUR VEHICLE Chassis Component Fluid, Lubricant, or Genuine Part Manual Transmission – We recommend you use MOPAR ATF+4 Automatic Transmission Fluid. If Equipped Automatic Transmission – Use only MOPAR ZF 8&9 Speed ATF Automatic Transmission Fluid, or If Equipped equivalent.
Page 575 MAINTENANCE SCHEDULES CONTENTS ▫ Maintenance Chart ....576 MAINTENANCE SCHEDULE ... . .574...
Page 576 574 MAINTENANCE SCHEDULES MAINTENANCE SCHEDULE is required for your vehicle. Have your vehicle serviced as soon as possible, within the next 500 miles (805 km). The Scheduled Maintenance services listed in this manual must be done at the times or mileages specified NOTE: to protect your vehicle warranty and ensure the best •...
Page 577 MAINTENANCE SCHEDULES 575 • Check the fluid levels of the coolant reservoir, brake than your authorized dealer, the message can be reset by referring to the steps described under “Driver Informa- master cylinder, and power steering, and add as tion Display (DID)” in “Understanding Your Instrument needed.
Page 578: Maintenance Chart
576 MAINTENANCE SCHEDULES Maintenance Chart Miles: Or Months: 102 108 114 120 126 132 138 144 150 Or Kilo- meters: Change the engine oil and engine oil filter. Rotate the tires, rotate at the first sign of irregular wear, even if it occurs before scheduled...
Page 579 MAINTENANCE SCHEDULES 577 Miles: Or Months: 102 108 114 120 126 132 138 144 150 Or Kilo- meters: Inspect front suspension, tie rod ends, and boot seals, for cracks or leaks and all parts for damage, wear, im- proper looseness or end play;...
Page 580 578 MAINTENANCE SCHEDULES Miles: Or Months: 102 108 114 120 126 132 138 144 150 Or Kilo- meters: If using your vehicle for any of the following: dusty or off-road conditions. Inspect the engine air cleaner filter; replace if necessary. Inspect the brake linings;...
Page 581 MAINTENANCE SCHEDULES 579 Miles: Or Months: 102 108 114 120 126 132 138 144 150 Or Kilo- meters: Inspect the CV joints. Inspect the exhaust system. Adjust the parking brake on vehicles equipped with four wheel disc brakes.
Page 582 580 MAINTENANCE SCHEDULES Miles: Or Months: 102 108 114 120 126 132 138 144 150 Or Kilo- meters: Inspect the manual transmission fluid (If equipped). Inspect the rear axle fluid. Change the manual transmission fluid (if equipped).
Page 583 MAINTENANCE SCHEDULES 581 Miles: Or Months: 102 108 114 120 126 132 138 144 150 Or Kilo- meters: Change the rear axle fluid if using your vehicle for any of the follow- ing: police, taxi, fleet or frequent trailer towing. Replace the engine air cleaner...
Page 584 582 MAINTENANCE SCHEDULES Miles: Or Months: 102 108 114 120 126 132 138 144 150 Or Kilo- meters: Replace the air condi- tioning filter. Inspect and replace the PCV Valve if necessary Replace the spark plugs – 6.2L Super- charged Engine ** Replace the spark plugs...
Page 585 MAINTENANCE SCHEDULES 583 Miles: Or Months: 102 108 114 120 126 132 138 144 150 Or Kilo- meters: Flush and replace the engine coolant at 120 months if not done at 150,000 miles (240,000 km). ** The spark plug change interval is mileage based only, yearly intervals do not apply.
Page 586 584 MAINTENANCE SCHEDULES WARNING! • You can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic.
Page 587 IF YOU NEED CONSUMER ASSISTANCE CONTENTS ▫ Customer Assistance For The Hearing Or SUGGESTIONS FOR OBTAINING SERVICE FOR YOUR VEHICLE ....587 Speech Impaired (TDD/TTY) ... . .589 ▫...
Page 588 586 IF YOU NEED CONSUMER ASSISTANCE ▫ Traction Grades ..... . .594 DEPARTMENT OF TRANSPORTATION UNIFORM TIRE QUALITY GRADES ..593 ▫...
Page 589: Suggestions For Obtaining Service For Your Vehicle
IF YOU NEED CONSUMER ASSISTANCE 587 SUGGESTIONS FOR OBTAINING SERVICE FOR Be Reasonable With Requests YOUR VEHICLE If you list a number of items and you must have your vehicle by the end of the day, discuss the situation with Prepare For The Appointment the service advisor and list the items in order of priority.
Page 590: Fca Us Llc Customer Center
588 IF YOU NEED CONSUMER ASSISTANCE Warranty service must be done by an authorized dealer. Any communication to the manufacturer’s customer cen- We strongly recommend that you take the vehicle to an ter should include the following information: authorized dealer. They know your vehicle the best, and •...
Page 591: Fca Canada Inc. Customer Center
IF YOU NEED CONSUMER ASSISTANCE 589 FCA Canada Inc. Customer Center Puerto Rico And U.S. Virgin Islands P.O. Box 1621 Customer Service Chrysler International Services LLC Windsor, Ontario N9A 4H6 P.O. Box 191857 Phone: (800) 465-2001 English / (800) 387-9983 French San Juan 00919-1857 Tel.: (787) 782-5757 In Mexico Contact...
Page 592: Service Contract
590 IF YOU NEED CONSUMER ASSISTANCE Canadian residents with hearing difficulties that require The manufacturer will not stand behind any service assistance can use the special needs relay service offered contract that is not the manufacturer’s service contract. It by Bell Canada. For TTY teletypewriter users, dial 711 is not responsible for any service contract other than the and for Voice callers, dial 1-800-855-0511 to connect with manufacturer’s service contract.
Page 593: Warranty Information
IF YOU NEED CONSUMER ASSISTANCE 591 MOPAR PARTS WARNING! MOPAR fluids, lubricants, parts, and accessories are Engine exhaust (internal combustion engines only), available from an authorized dealer. They are recom- some of its constituents, and certain vehicle compo- mended for your vehicle in order to help keep the vehicle nents contain, or emit, chemicals known to the State operating at its best.
Page 594: In Canada
592 IF YOU NEED CONSUMER ASSISTANCE campaign. However, NHTSA cannot become involved in PUBLICATION ORDER FORMS individual problems between you, your authorized To order the following manuals, you may use either the dealer, and the manufacturer. website or the phone numbers listed below. Visa, Mas- To contact NHTSA, you may either call the Auto Safety tercard, American Express, and Discover orders are ac- Hotline toll free at 1-888-327-4236 (TTY: 1-800-424-9153),...
Page 595: Department Of Transportation Uniform Tire Quality Grades
IF YOU NEED CONSUMER ASSISTANCE 593 Diagnostic Procedure Manuals Call toll free at: • 1-800-890-4038 (U.S.) Diagnostic Procedure Manuals are filled with diagrams, charts and detailed illustrations. These practical manuals • 1-800-387-1143 (Canada) make it easy for students and technicians to find and fix problems on computer-controlled vehicle systems and features.
Page 596: Traction Grades
594 IF YOU NEED CONSUMER ASSISTANCE Treadwear WARNING! The Treadwear grade is a comparative rating, based on The traction grade assigned to this tire is based on the wear rate of the tire when tested under controlled straight-ahead braking traction tests, and does not conditions on a specified government test course.
Page 597 IF YOU NEED CONSUMER ASSISTANCE 595 The grade C corresponds to a level of performance, which all passenger vehicle tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent higher levels of performance on the laboratory test wheel, than the minimum required by law.
Page 599 INDEX...
Page 600 598 INDEX About Your Brakes .....418, 421 Knee Impact Bolsters .....60 Adaptive Cruise Control (ACC) (Cruise Control) .
Page 601 INDEX 599 Alarm (Security Alarm) ....19, 238 Fluid Change ......542 Alarm System (Security Alarm) .
Page 602 600 INDEX Brake Fluid ......570, 572 Caps, Filler Brake, Parking ......418 Fuel .
Page 603 INDEX 601 Child Restraints ......72 SRT ....... . .397 Child Seat Installation .
Page 604 602 INDEX Customer Assistance ..... . .587 Disposal Customer Programmable Features ... . .283 Antifreeze (Engine Coolant) .
Page 605 INDEX 603 Electrical Power Outlets.....213 Engine......510, 511 Electric Remote Mirrors .
Page 606 604 INDEX Overheating ......480 Flashers Starting ......375 Hazard Warning .
Page 607 INDEX 605 Adding ......470 Gasoline (Fuel) ......466 Additives .
Page 608 606 INDEX Lights On Reminder .....144 Immobilizer (Sentry Key) ....16 On With Wipers .
Page 609 INDEX 607 Panic Alarm ......24 Lane Change And Turn Signals ....144 Programming Additional Key Fobs .
Page 610 608 INDEX Center Mounted Stop ....567 Lights On Reminder .....144 Courtesy/Reading .
Page 611 INDEX 609 Load Shed Backward ......131, 132 Battery Saver Mode ..... .278 Forward .
Page 612 610 INDEX Modifications/Alterations, Vehicle ....7 Synthetic ......519 Monitor, Tire Pressure System .
Page 613 INDEX 611 Passenger Seat Power Seats Easy Entry ......133 Down .......127 Passing Light .
Page 614 612 INDEX Radio (Sound Systems) .....332 Lock The Doors ......23 Rain Sensitive Wiper System .
Page 615 INDEX 613 Restraints, Child ......72 Seat Belt Extender ..... . .52 Restraints, Occupant .
Page 616 614 INDEX Head Restraints ......134 Service Contract ......590 Heated .
Page 617 INDEX 615 Cancel .......157 Steering Resume ......157 Column Controls .
Page 618 616 INDEX Telescoping Steering Column....152, 153 Load Capacity ..... .443, 444 Temperature Control, Automatic (ATC) .
Page 619 INDEX 617 Recreational ......476 Trunk Release Remote Control ....41 Towing Vehicle Behind A Motorhome .
Page 620 618 INDEX Unleaded Gasoline ......466 Washers, Windshield ....148, 150, 528 Untwisting Procedure, Seat Belt .
Page 621 INSTALLATION OF RADIO TRANSMITTING EQUIPMENT Special design considerations are incorporated into this The antenna cable should be as short as practical and vehicle’s electronic system to provide immunity to radio routed away from the vehicle wiring when possible. Use frequency signals. Mobile two-way radios and telephone only fully shielded coaxial cable.

This manual is also suitable for:

Challenger hellcat 2016

Dodge Challenger SRT 2016 Owner's Manual

Introduction

Things to Know before Starting Your Vehicle

Understanding the Features of Your Vehicle

Understanding Your Instrument Panel

Starting and Operating

Quick Links

Chapters

Related Manuals for Dodge Challenger SRT 2016

Summary of Contents for Dodge Challenger SRT 2016