Enabling And Disabling Parksense; Operation Witha Trailer; Service The Parksense Park Assist System - Dodge DURANGO 2021 Owner's Manual

146 STARTING AND OPERATING
E A D
NABLING ND ISABLING
ParkSense can be enabled and disabled with
the ParkSense switch.
When the ParkSense switch is pushed
to disable the system, the instrument
cluster will display the "PARKSENSE
OFF" message for approximately
five seconds. When the gear selector is moved
to REVERSE and the system is disabled, the
instrument cluster display will display the
"PARKSENSE OFF" message for as long as
the vehicle is in REVERSE.
NOTE:
When ParkSense is disabled and the gear
selector is moved to the DRIVE position, no
warning message will be displayed.
The ParkSense switch LED will be on when
ParkSense is disabled or requires service.
The ParkSense switch LED will be off when the
system is enabled. If the ParkSense switch is
pushed, and the system requires service, the
ParkSense switch LED will blink momentarily,
and then the LED will be on.
P S O
ARK ENSE PERATION
For vehicles equipped with an Integrated Trailer
Brake Module (ITBM), the operation of the rear
sensors is automatically deactivated when the
trailer's electric plug is inserted in the vehicle's tow
hook socket. The front system is still functional, and
the arcs will be overlaid with a "Trailer" message.
The rear sensors are automatically reactivated
when the trailer's cable plug is removed.
When the vehicle is connected to a trailer, the
instrument cluster display will show the "Rear
ParkSense Unavailable Trailer Connected"
message in the following situations:
For five seconds at vehicle start up

For five seconds when the ParkSense button

is pushed, as long as an object is not
detected in the front
As long as the vehicle is in REVERSE (vehicle

graphic displayed with a trailer overlay)
NOTE:
For more information on the Integrated Trailer
Brake Module, see Ú page 162.
W A T
ITH RAILER
S T P S
ERVICE HE ARK ENSE
S
YSTEM
During vehicle start up, when the ParkSense System
has detected a faulted condition, the instrument
cluster will actuate a single chime, once per ignition
cycle, and it will display the "PARKSENSE
UNAVAILABLE WIPE REAR SENSORS", "PARKSENSE
UNAVAILABLE WIPE FRONT SENSORS", or the
"PARKSENSE UNAVAILABLE SERVICE REQUIRED"
message for five seconds. When the gear selector is
moved to REVERSE and the system has detected a
faulted condition, the instrument cluster display will
display a "PARKSENSE UNAVAILABLE WIPE REAR
SENSORS", "PARKSENSE UNAVAILABLE WIPE
FRONT SENSORS" or "PARKSENSE UNAVAILABLE
SERVICE REQUIRED" pop up message for five
seconds. After five seconds, a vehicle graphic will be
displayed with "UNAVAILABLE" at either the front or
rear sensor location depending on where the fault is
detected. The system will continue to provide arc
alerts for the side that is functioning properly.
These arc alerts will interrupt the "PARKSENSE
UNAVAILABLE WIPE REAR SENSORS", "PARKSENSE
UNAVAILABLE WIPE FRONT SENSORS", or
P A
ARK SSIST