Bulb Replacement; Front Low/High Beam Headlamp And Park/Turn Lamp - Models With Halogen Headlamps - Dodge Charger SRT 392 2017 Operating Information Manual

Exterior Bulbs
Low/High Beam Headlamp (Standard Halogen Bi Function Projector)
Low/High Beam Headlamp – High Intensity Discharge (Premium HID Bi
Function Projector)
Front Park/Turn Lamp
Front Fog Lamp – If Equipped
Front Side Marker
Rear Tail Lamp
Rear Stop/Turn Lamp
Rear Side Marker
Backup Lamp
License

BULB REPLACEMENT

NOTE:
Lens fogging can occur under certain atmo-
spheric conditions. This will usually clear as
atmospheric conditions change to allow the con-
densation to change back into a vapor. Turning
the lamps on will usually accelerate the clearing
process.
Front Low/High Beam Headlamp And
Park/Turn Lamp — Models With
Halogen Headlamps
1. Open the hood.
NOTE:
Removal of the air cleaner filter housing may
be necessary prior to replacing bulbs in the
headlamp assembly on the driver side of the
vehicle.
2. Remove the large dust cap from the head-
lamp housing by turning it counterclockwise,
turn the bulb counterclockwise and remove.
Bulb Number
9005SL+
D3S (Serviced At Authorized Dealer)
LED (Serviced At Authorized Dealer)
LED (Serviced At Authorized Dealer)
LED (Serviced At Authorized Dealer)
LED (Serviced At Authorized Dealer)
LED (Serviced At Authorized Dealer)
LED (Serviced At Authorized Dealer)
LED (Serviced At Authorized Dealer)
LED (Serviced At Authorized Dealer)
CAUTION!
Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If
the bulb comes in contact with an oily surface,
clean the bulb with rubbing alcohol.
3. Disconnect the bulb from the socket assem-
bly and install the replacement bulb.
4. Reinstall the bulb and socket assembly into the
headlamp assembly, and then turn it clockwise.
5. Reinstall the dust cap.
263