Table of Contents
Advertisement
Setting Name
Rear ParkSense Volume
NOTE:
The Rear ParkSense Chime Volume settings can be selected from the instrument cluster display or Uconnect System. The chime volume settings
include LOW, MEDIUM, and HIGH. The factory default volume setting is MEDIUM. ParkSense will retain its last known configuration state through
ignition cycles.
Tilt Side Mirrors
In Reverse
NOTE:
When the "Tilt Side Mirror In Reverse" feature is selected, the exterior sideview mirrors will tilt downward when the ignition is in the RUN position and
the transmission gear selector is in the REVERSE position. The mirrors will move back to their previous position when the transmission is shifted out
of REVERSE.
Blind Spot Alert — If
Equipped
NOTE:
• When the "Blind Spot Alert" feature is selected, the Blind Spot Alert feature Provides alerts, visual and/or audible, to indicate objects in your blind spot.
The Blind Spot Alert feature can be activated in "Lights" mode. When this mode is selected, the Blind Spot Monitor (BSM) system is activated and will
only show a visual alert in the exterior mirrors. When "Lights & Chime" mode is activated, the Blind Spot Monitor (BSM) will show a visual alert in the
exterior mirrors as well as an audible alert when the turn signal is on.
• If your vehicle has experienced any damage in the area where the sensor is located, even if the fascia is not damaged, the sensor may have become
misaligned. Take your vehicle to an authorized dealer to verify sensor alignment. Having a sensor that is misaligned will result in the BSM not operating
to specification.
Low
Off
Lights
Selectable Options
Medium
High
Lights & Chime
145
Advertisement
Chapters
Table of Contents
