Dodge Charger SRT 392 2017 Operating Information Manual page 43

Lower Anchors And Tethers For CHildren
(LATCH) Restraint System
LATCH Label
Your vehicle is equipped with the child restraint
anchorage system called LATCH, which stands
for Lower Anchors and Tethers for CHildren. The
LATCH system has three vehicle anchor points
for installing LATCH-equipped child seats.
What is the weight limit (child's weight + weight of the
child restraint) for using the LATCH anchorage system to
attach the child restraint?
40
There are two lower anchorages located at the
back of the seat cushion where it meets the
seatback and one top tether anchorage located
behind the seating position. These anchorages
are used to install LATCH-equipped child seats
without using the vehicle's seat belts. Some
seating positions may have a top tether anchor-
age but no lower anchorages. In these seating
positions, the seat belt must be used with the
top tether anchorage to install the child restraint.
Please see the following table for more
information.
Frequently Asked Questions About Installing Child Restraints With LATCH
Use the LATCH anchorage system until the combined
weight of the child and the child restraint is 65 lbs
65 lbs (29.5 kg) (29.5 kg). Use the seat belt and tether anchor instead of
the LATCH system once the combined weight is more
LATCH Positions For Installing Child
Restraints In This Vehicle
LATCH Positions For Installing Child
Restraints In This Vehicle
Lower Anchorage Symbol (2 Anchorages Per
Seating Position)
Top Tether Anchorage Symbol
than 65 lbs (29.5 kg).