Setting Procedure
3.6 Saving EtherNet/IP Settings
3.6.1 Saving EtherNet/IP Settings in Project
The following procedure is explained on the assumption that the EtherNet/IP setting screen
has been activated.
PROCEDURE
Press the [OK] button on the lower right of the screen.
3.6.2 Saving/Reading EtherNet/IP Settings in File
Save and read the settings specified in the EtheNet/IP Setting screen into a separate file from
the project file. The saved EtherNet/IP settings can be reused in multiple units and projects.
The following procedure is explained on the assumption that the EtherNet/IP setting screen
has been activated.
3-22