Setting Procedure - Panasonic AFP0HC32ET User Manual

3.1.2 Setting Procedure

The setting procedure is as follows.
Use Programming software Control FPWIN GR7 (hereinafter referred to FPWIN GR7) for the
settings.
Item
1 Initial setting of Ethernet /IP
Settings of connection using
2
FP0H as originator
Settings of connection using
3
FP0H as target
Confirmation of load factor
4
calculation
5 Saving of Ethernet/IP settings
Outline of operation
Enable EtherNet/IP communication in the "Ethernet settings"
and make the initial setting of EtherNet/IP.
Register EDS Files of target devices.
Add targets in the scan list.
Register connection information (such as connected targets,
cyclic communication, corresponding data areas and sizes).
Add I/O map in the scan list.
Register the tag/instance information connected.
Confirm the load factor calculation is 100% or less.
Save the settings of EtherNet/IP.
3.1 Overview of Settings
Reference
p.3-4
p.3-9
p.3-10
p.3-11
p.3-17
p.3-18
p.3-21
p.3-22
3-3