Panasonic AFP0HC32ET User Manual page 39

3. According to the target, change "Tag Name/Instance Name" and "Data Size".
(Note) The Instance ID and data size are changed from "Parameter Setting".
In this example, "Tag Name = Tag_Test2", and "Data Size = 20 bytes (10 words)".
KEY POINTS
For some targets, "Application Type" (Input Only/Exclusive Owner) can be
•
selected from "Connection Name".
When "Exclusive Owner" is selected for "Application Type", specify "Output
•
Information (O>T)" for sending data from the originator to the target.
Items such as "RPI" and "Input Send Trigger" can be changed in the
•
"Connection Setting" screen.
(Refer to "4.3.2 Operations in Connection Setting Screen".)
3.3 Settings of Connection Using FP0H as Originator
3-13