Table of Contents
Advertisement
1.3 Specification
8 CompactPCI slots (one system slot and 7 peripheral slots)
l
Bus width: 32-bit (64-bit upon request)
l
8-layer PCB, 3.0 mm thick
l
Separate power and ground planes
l
Power connectors:
l
Ø
One ATX power connector for connecting standard ATX power
supply
Ø
Screw terminals (on rear side) for external power inputs
Ø
Two IEC 603-2(DIN 41612) power connectors for two 2-slot wide
plug-in power modules. (the connectors are upon reguest)
20-pin connector for MIC-3920/MIC-3921 alarm board signals
l
Complies with CompactPCI Specification PICMG 2.0, Ver.2.1
l
Complies with CompactPCI Hot Swap Specification PICMG 2.1,
l
Ver.1.0 (MIC-3451H)
V I/O Voltage: 3.3 V or 5 V, jumper selectable
l
Supports PXI star trigger signals (optional)
l
Logic Ground and Chassis Ground can be isolated or common
l
Dimensions: 262.8 x 128.6 mm
l
Operating temperature: -40 ~ 80°C (-40 ~ 176°F)
l
Chapter 1 Introduction
3
Advertisement
Table of Contents
