Troubleshooting - KitchenAid 9KSM95 Series Manual

TROUBLESHOOTING

Electrical Shock Hazard
Plug into an earthed outlet.
Do not remove earth prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these
instructions can result in
death, fire, or electrical shock.
16 | TROUBLESHOOTING
W11225091B.indb 16
©2018 All rights reserved� KITCHENAID and the design of
the stand mixer are trademarks in the U�S� and elsewhere�
If your Stand Mixer should malfunction,
please check the following:
1. The Stand Mixer may warm up during
use� Under heavy loads with extended
mixing time periods, you may not be
able to comfortably touch the top of
the unit� This is normal�
2. The Stand Mixer may emit a pungent
odor, especially when new� This is
common with electric motors�
3. If the flat beater hits the bowl, stop the
Stand Mixer� See the "Assembling the
Stand Mixer" section and adjust the
beater to bowl clearance�
4. The speed control lever does not move
smoothly or easily� To move the speed
control lever with ease, lift slightly up
as you move it across the settings in
either direction�
5. If your Stand Mixer should fail to
operate, please check the following:
• Is the Stand Mixer plugged in?
• Is the fuse in the circuit to the Stand
Mixer in working order? If you have
a circuit breaker box, be sure the
circuit is closed�
• Turn off the Stand Mixer for
10-15 seconds, then turn it back
on� If the Stand Mixer still does not
start, allow it to cool for 30 minutes
before turning it back on�
If the problem cannot be corrected:
See the "Warranty and service" section�
Do not return the Stand Mixer to the
retailer; retailers do not provide service�
5/10/2018 6:35:29 PM