Assembling The Stand Mixer - Kitchenaid 9Ksm95 Series Manual

USING THE STAND MIXER

ASSEMBLING THE STAND MIXER

Check to be sure that the Stand
1
Mixer is unplugged, and the speed
control is turned to "0"�
NOTE: To move the speed control lever
with ease, lift slightly up as you move it
across the settings in either direction�
Attach the bowl: Place the bowl on
the bowl clamping plate and gently
3
turn it in a clockwise direction to
lock it into place�
8 | USING THE STAND MIXER
W11225091B.indb 8
Raise the motor head: Slide the
2
locking lever to the unlock position
and lift the motor head�
Attach any accessory: Slip the
accessory onto the beater shaft and
press upward as far as possible� Turn
4
the accessory counterclockwise to
hook the accessory over the pin on
the shaft�
5/10/2018 6:35:26 PM