Adam Equipment CQT1752GR Manual page 10

stored
The container can now be removed from the scale and a screening performed.
5) Replace the same 500ml container on to the scale with the grain that is left
following the screening. The display will show the net weight of the grain that is
left, for example 300g left meaning 100g removed.
Again at this point you can press the [CON/UNIT] key to view the yield values
calculated in k.hl and L.bu based on the new net weight in the container.
Smp
stored
6) In order for the scale to calculate a negative or positive dockage following the first
screening press the [STORE] key, Store 1
will be entered into the memory and calculate the % grain remaining and removed
against the initial sample weight value stored at point 4.
Note that in order to perform a new STORE the scale has to go back to ZERO or a
negative value, removing the container to perform a screening allows the display
to go to a negative value which then permits the new STORE to be performed
when the container is placed back onto the top pan.
The first dockage result will then be displayed, and by pressing the [CON/UNIT]
key further results can be viewed including dockage, the net weight in grams
which was used in the calculation, and also the new yield values.
Pressing the [RECALL/CE] key unlocks the display for further weighings. Pressing
the [RECALL/CE] key again continuously will show you the same results with
reference to a particular screening, this can be done at any time and will progress
st
from the 1 screening through to the last screening stored showing all results.
Once all of the stored results have been displayed the next press of the
[RECALL/CE] key will exit you from these results.
7) A further screening can now take place following the same procedure as above
with the next net value being stored. Following the storing of the new net weight
the same information is available by pressing the appropriate keys. Screenings
can be repeated for up to 5 times with each result able to be stored and %
dockage, grams, yield and net weight values to be recalled. Each time a net
weight is stored the display will show Store x (x being the number of the screening
performed).
© Adam Equipment Company 2012
300.00 g
0.5lt
8
qt
Net
pt
lt
st
will be displayed. The new net weight