Foreseeable Misuse; Competent Personnel; Responsibility For Safety - Leuze electronic ERS200-M0C3-M20-HLR Operating Instructions Manual

Safety
Make no structural changes to the E-Stop Rope Switch.
The E-Stop Rope Switch must be exchanged after a maximum of 20 years.
2.1.2

Foreseeable misuse

Any use other than that defined under the "approved purpose" or which goes
beyond that use of the E-Stop Rope Switch is considered improper use!
E.g. - using without non-detachably mounted actuator
• looping into the safety circuit parts that are not relevant to safety
• using the switch as a limit stop
2.2

Competent personnel

Prerequisites for competent personnel:
• suitable technical training
• knows the rules and regulations for occupational safety, safety at work and
safety technology and can assess the safety of the machine
• knows the instructions for the E-Stop command device and the machine
• has been instructed by the responsible individuals on the mounting and
operation of the machine and of the E-Stop command device
2.3

Responsibility for safety

Manufacturer and operating company must ensure that the machine and imple-
mented E-Stop Rope Switch function properly and that all affected persons are
adequately informed and trained.
The type and content of all imparted information must not lead to unsafe actions
by users.
The manufacturer of the machine is responsible for:
• safe machine construction
• safe implementation of the E-Stop command device
• imparting all relevant information to the operating company
• adhering to all regulations and directives for the safe starting-up of the
machine
10
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
ERS200 Leuze electronic