Table of Contents
Advertisement
6.3
Mounting the rope
WARNING
Severe accidents may result if the rope is not mounted properly!
The rope must not chafe or catch.
Use deflection rollers.
Observe the maximum lengths, which are dependent on temperature fluctu-
ations (see chapter 6) and (see chapter 14).
Pay attention to rope tension, use safety spiral springs if necessary (see
chapter 13).
Prerequisites for proper function:
• rope and rope clamps are appropriate for the E-Stop Rope Switch
Proper function is ensured only with original accessories (see chapter 13).
• E-Stop Rope Switch, rope clamps and deflection rollers are mounted
• the rope is sufficiently long (take into account deflection rollers)
• rope can be optimally positioned for ergonomics
Before the length and tension of the rope can be properly adjusted, the end of
the rope opposite the E-Stop Rope Switch must first be secured.
Push the rope cover for the rope clamp onto the rope.
Guide the rope end into the rope clamp.
Leuze electronic
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
ERS200
Mounting
25
Advertisement
Table of Contents
