Table of Contents
Advertisement
•
Extend the server from the rack (Extend the server from the rack on page 53).
•
Remove the server from the rack (Removing the server from the rack on page 54).
4.
Remove the access panel (Removing the access panel on page 55).
CAUTION: Do not operate the server for long periods with the access panel open or removed.
Operating the server in this manner results in improper airflow and improper cooling that can lead
to thermal damage.
5.
Remove the riser cage (Removing the PCIe riser cages on page 59).
6.
Install the riser board.
7.
Install the tertiary riser cage (Installing a tertiary PCIe cage on page 91).
8.
Install the access panel (Installing the access panel on page 56).
9.
Install the server into the rack (Installing the server into the rack on page 48).
10. Connect each power cord to the server.
11. Connect each power cord to the power source.
12. Power up the server on page 53.
Expansion slot options
PCIe riser board slot definitions
Installing a riser cage in the primary, secondary, or tertiary PCIe connectors determines which PCIe form
factor can be supported.
96
Installing hardware options
Advertisement
Table of Contents
