Program Selection Screen; Conefire; Delay; High Limit - Orton AutoFire AF4TS User Manual

Program Selection Screen

To select a firing Program or to setup a new firing program, Use the Slide button on the Home screen to choose
PROGRAM.

Delay:

Set a delay start
time for the next
firing.
User Programs:
Slide Left for User
Programs

Conefire

If Conefire programming is not desired, this feature can be disabled on the Program Selection screen. Touch the
setting field to switch ON or OFF.
Delay
Delay Start allows the operator to program a delay time prior to the firing. The delay time is
initiated when the operator presses START from the HOME screen to begin the firing.
To set a delay time, Touch the delay time to bring up a keypad. Use the keypad to set a new
delay time in Hours:Minutes format. Then press the SAVE button.
The maximum delay time is 99 hours and 59 minutes.
Delay time resets to zero after each firing.

High Limit

High Limit allows the User to set a maximum operating temperature for the firing. If the controller detects a higher
temperature, it will abort the firing with a High Temp Limit alarm.
AutoFire Slide Kiln Controller
Home button
12
Conefire:
Enable or disable
Cone programs
High Limit:
Set a max temp
limit for all
programs
Cone Programs:
Slide right for
Cone Programs