Table of Contents
Advertisement
When the Controller is first turned on
The controller runs a brief self-diagnostic test and displays a Splash screen. After a few seconds, the display will
show the Home screen and Standby mode where the controller is not actively firing the kiln or being programmed
for a firing.
Sleep Screen
When the controller is in STANDBY mode, if the touchscreen is inactive for 5 minutes, the
screen will go to sleep mode. The screen will go black and the main temperature will be the
only thing reported. Touch the screen to awaken.
Home Screen
The Home screen provides access to all the features and status reports for the controller.
Temperature:
Touch to
change color
Status:
Firing Status
Program:
Slide Left for
Program setup or
selection
AutoFire Slide Kiln Controller
History:
Firing Results
Logs
Part status
Settings:
Configuration
Preferences
About Info
8
Temperature
Units:
F or C
Program name:
Active Program
START:
Begin a new
Firing
Options:
Slide Right for
Firing options
Advertisement
Table of Contents
