Features Clock Screens - NewMar SilverLeaf RV-C Control System Training Manual

FEATURES CLOCK SCREENS

The Clock Screen is accesses by pressing the
Clock Button from The Features Screen.
This screen displays the system time, outside
temperature, system warnings/errors and
allows you to access both the Alarm Clock and
Countdown Timer functions.
Pressing the Alarm Button will take you to the
Alarm Clock page. On this page are two scroll
bars that allow you to set the time of day for
the alarm. This page also contains a Back Button
that returns you to the previous page, as well
as, an up/down arrow that allows you to toggle
the alarm between the Off, Once Only or Every
Day settings and a Set Clock Button. The Set
Clock Button takes you to Monitor
Configuration page 1, which allows you to set
the system time.
Pressing the Timer Button on the Clock Screen
accesses the Countdown Timer screen. This
screen has two scroll bars that allow you to set
the countdown minutes and seconds. There is a
Start Button on this screen that when pressed
begins the countdown timer. This screen also
has Back and Set Clock Buttons the same as the
Alarm Clock screen.
.
Page 16