NewMar SilverLeaf RV-C Control System Training Manual page 30

FLOOR HEAT with 4 Time Schedule Screen 1 of 3
The Floor Heat Configuration Screen is accessed
by pressing the Floor Heat Configuration Button
located on the Features Configuration Screen.
FLOOR HEAT with 4 Time Schedule Screen 2 of 3
The Floor Heat Configuration Screen is accessed
by pressing the Floor Heat Configuration Button
located on the Features Configuration Screen.
This screen is only applies to systems with the
Floor Heat option.
These selections set the 2 time zones floor heat
settings displayed on the "Floor" Screen.
Depending on the HMS360 Touch Screen
Display Software Version, this screen or a
similar screen, may be located under the
Climate Configuration Screens, not under the
Floor Heat Configuration Screens
This screen allows you to change the following
settings:
AM/On
Select using the Up / Down Arrows
AM/Off
Select using the Up / Down Arrows
AM/On Setting
Select using the Up / Down Arrows
This screen is only applies to systems with the
Floor Heat option.
These selections set the 2 time zones floor heat
settings displayed on the "Floor" Screen.
Depending on the HMS360 Touch Screen
Display Software Version, this screen or a
similar screen, may be located under the
Climate Configuration Screens, not under the
Floor Heat Configuration Screens
This screen allows you to change the following
settings:
PM/On
Select using the Up / Down Arrows
PM/Off
Select using the Up / Down Arrows
PM/On Setting
Select using the Up / Down Arrows
Time Setting
Time Setting
Floor Heat Setting
Time Setting
Time Setting
Floor Heat Setting
Page 28