NewMar SilverLeaf RV-C Control System Training Manual page 31

FLOOR HEAT with 4 Time Schedule Screen 3 of 3
The Floor Heat Configuration Screen is accessed
by pressing the Floor Heat Configuration Button
located on the Features Configuration Screen.
This screen is only applies to systems with the
Floor Heat option.
These selections set the floor heat zone names
displayed on the "Floor" Screen.
Depending on the HMS360 Touch Screen
Display Software Version, this screen or a
similar screen, may be located under the
Climate Configuration Screens, not under the
Floor Heat Configuration Screens
This screen allows you to change the following
settings:
Floor 1 Name
Select using the Up / Down Arrows
Floor 2 Name
Select using the Up / Down Arrows
Floor 3 Name
Select using the Up / Down Arrows
Set to Front
Set to Mid
Set to Rear
Page 29