Taylor-Dunn ET 1-50 Operation And Maintenance Manual page 35

81
TAYLOR•DUNN
BRAKE SYSTEM
\ _ P•lmuy shoe .,tt,ctlng spdng
Figure B - 6f
Connect the primary shoe retracting spring to the anchor pin. Install the cable guide in the secondary shoe. Route
the cable around the guide, making sure it is in the groove and not between the guide and shoe.
Connect the secondary shoe retracting spring to the anchor pin.
Note: Make sure that the anchor pin plate, cable anchor, and the hooks on the primary and secondary shoe
retracting springs are all stacked flat on the anchor pin.
TAYLOR-DUNN: ET 1-50
BRAKES -13