Replacing The Headlights - Taylor-Dunn ET 1-50 Operation And Maintenance Manual

II
TAYLOR•DUNN
Figure 1-2
Replacing the Headlights
D
Remove the four phillips screws from the headlight lens frame.
fJ
Remove four short phillips screws from the headlight mounting bracket.
ID
The headlight is now free to move. Reach behind it and disengage the electrical coupling.
lJ
Engage the electrical coupling on the new headlight.
l;I
Install the headlight mounting bracket with four short phillips screws.
l;I
Install the headlight lens frame with the four remaining phillips screws.
ACCESSORIES
TAYLOR-DUNN: ET 1-50
ACCESSORIES - 3