Installing The Motor - Taylor-Dunn ET 1-50 Operation And Maintenance Manual

II
TAYLOR•DUNN
Remove four remaining bolts and remove rear plate from
the motor. Set the old motor aside.
Installing the New Motor
Remove the screws that mount the original brackets to the
new motor. Dispose of the brackets properly.
Install the screws back in position and tighten securely.
Install the new motor in reverse order.
TAYLOR-DUNN: ET 1-50
POWER TRAIN
Place all screws back In the motor /
and tighten securely.
Figure F-2d
POWER TRAIN - 9