Automatic Programmes - AEG BSK774121M User Manual

20 www.aeg.com
If you use the clock
functions: Duration, End
Time, the oven turns off the
heating elements after 90 %
of the set time. The oven
uses the residual heat to
continue the cooking
process until the time ends
(3 - 20 minutes).
8.2 Setting the clock functions
Before you use the
functions: Duration, End
Time, you must set a heating
function and temperature
first. The oven turns off
automatically.
You can use the functions:
Duration and End Time at
the same time if you want to
automatically turn on and
turn off the oven on a given
time later.
The functions: Duration and
End Time do not work when
you use the core
temperature sensor.
1. Set a heating function.
2. Press
display shows the necessary clock
function and the related symbol.
3. Press
time.
4. Press
When the time ends, a signal sounds.
The oven turns off. The display shows a
message.
5. Press any symbol to stop the signal.

9. AUTOMATIC PROGRAMMES

WARNING!
Refer to Safety chapters.
9.1 Recipes with Recipe
Automatic
This oven has a set of recipes you can
use. The recipes are fixed and you
cannot change them.
again and again until the
or to set the necessary
to confirm.
8.3 Heat + Hold
Conditions for the function:
• The set temperature is more than 80
°C.
• The function: Duration is set.
The function: Heat + Hold keeps
prepared food warm at 80 °C for 30
minutes. It turns on after the baking or
roasting procedure ends.
You can turn on or turn off the function in
the menu: Basic Settings.
1. Turn on the oven.
2. Select the heating function.
3. Set the temperature above 80 °C.
4. Press again and again until the
display shows: Heat + Hold.
5. Press
to confirm.
When the function ends, a signal sounds.
8.4 Time Extension
The function: Time Extension makes the
heating function continue after the end
of Duration.
Applicable to all heating
functions with Duration or
Weight Automatic.
Not applicable to heating
functions with the core
temperature sensor.
1. When the cooking time ends, a
signal sounds. Press any symbol.
The display shows the message.
2. Press
to turn on or
3. Set the length of the function.
4. Press .
1. Turn on the oven.
2. Select the menu: Recipes. Press
to confirm.
3. Select the category and dish. Press
to confirm.
4. Select a recipe. Press
to cancel.
to confirm.