Using The Accessories - AEG BSK774121M User Manual

9.2 Assisted Cooking with
Weight Automatic
This function automatically calculates the
cooking time. To use it, it is necessary to
input the food weight.
1. Turn on the oven.
2. Select the menu: Assisted Cooking.
Press
3. Select the dish with the function:
Weight Automatic. Press

10. USING THE ACCESSORIES

WARNING!
Refer to Safety chapters.
10.1 Core temperature sensor
There are two temperatures to be set:
the oven temperature and the core
temperature.
The core temperature sensor measures
the core temperature of the meat. When
the meat is at the set temperature, the
oven turns off.
CAUTION!
Only use the core
temperature sensor supplied
or the correct replacement
parts.
The core temperature sensor
must stay in the meat and in
the socket during the
cooking.
1. Put the tip of the core temperature
sensor into the centre of the meat.
2. Put the plug of the core temperature
sensor into the socket at the top of
the cavity.
.
.
4. Press or
weight. Press
The automatic programme starts.
5. You can change the weight at any
time. Press or
weight.
6. When the time ends, a signal sounds.
Press any symbol to turn off the
signal.
3. Turn on the oven.
The display shows the core temperature
sensor symbol.
4. Press or
seconds to set the core temperature.
5. Set the heating function and, if
necessary, the oven temperature.
The oven calculates an approximate end
time. The end time is different for the
different quantities of the food, the set
oven temperatures (minimum 120 °C)
and the operating modes. The oven
calculates the end time in approximately
30 minutes.
6. To change the core temperature,
press .
When the meat is at the set core
temperature, a signal sounds. The oven
turns off automatically.
7. Press any symbol to stop the signal.
8. Remove the core temperature sensor
plug from the socket and remove the
meat from the oven.
9. Press to turn off the oven.
ENGLISH 21
to set the food
.
to change the
in less than 5