Audio Pré-Amp Input (Optional) - Barco Solaris LC40 Owner's Manual

Specifications
R
Image 4-9
RGBHV inputs : 0.7V
How to select with the RCU.
1. Press 4 on the RCU
How to select the RGB input via the menu structure?
1. Press on the thumb wheel or press ENTER on the RCU to activate the menus.
The main menu will be displayed on the screen. (menu 4-24)
2. Turn the thumb wheel or use the up or down arrow keys to select Input selection.
The input selection menu will be displayed. The correct input will be filled out immediately in input selection 4. (menu 4-25)
3. Turn the thumb wheel or use the up or down arrow keys to select 4 RGB.
4. Press the thumb wheel or press ENTER on the RCU.
Solaris LC40
Select input
Image settings
Audio settings
PiP settings
Compact PC Control
Advanced settings
Standby
Back
Menu 4-24
4.2.10 Audio pré-amp input (optional)
This input slot is NOT hot-pluggable. Make sure the system is switched off before inserting or removing an
input module!
Specifications
L
Image 4-10
Audio input
Left and right input channel : maximum 2.5V
Input Left-Right impedance : 50 kΩ
Left and right output : maximum 2.5V
Output Left-Right impedance : 1 kΩ
Output subwoofer impedance : 1 kΩ
R5976672 SOLARIS LC40 01042004
G
B
±3 dB
pp
Input Selection
1. Video
2. RGB
3. S-Video
4. RGB
5. SDI
6. RGB
7. DVI
8. Compact PC
Configure input 2
Back
Menu 4-25
R
SUBW
OUT
pp
pp
H V
L R
IN
4. Connections
23