Tint (Hue); Sharpness - Barco Solaris LC40 Owner's Manual

8. Image Settings

8.6 Tint (hue)

About Tint (hue)
The Tint function is used to adjust color hue to obtain true color reproduction and is only active for Video and S-Video when the
NTSC color system is used. For PAL and SECAM sources, tint is not accessible.
How to change the Tint ?
1. Select Image Settings.
2. Press ENTER to select.
Image settings menu will be displayed (menu 8-6)
3. Select Tint.
4. Press ENTER to activate.
A slider box appears.
5. Use the ↑ or ↓ to change the Tint.
The higher the value, the higher the tint.
Image Settings
Aspect ratio
Brightness
Contrast
(Color) Saturation
Tint

Sharpness

Viewport
Phase
Back
Menu 8-6
8.7 Sharpness
About Sharpness
The Sharpness function is used to adjust the image sharpness of video signals.
How to change the Sharpness ?
1. Select Image Settings.
2. Press ENTER to select.
Image settings menu will be displayed (menu 8-7)
3. Select Sharpness.
4. Press ENTER to activate.
A slider box appears.
5. Use the ↑ or ↓ to change the Sharpness.
The higher the value, the higher the sharpness.
Image Settings
Aspect ratio
Brightness
Contrast
(Color) Saturation
Tint
Sharpness
Viewport
Phase
Back
Menu 8-7
46 R5976672 SOLARIS LC40 01042004