Using The Rcu - Barco Solaris LC40 Owner's Manual

Switching to Standby with the thumb wheel
1. Press the thumb wheel once.
The main menu will be displayed. (menu 5-1)
2. Turn the thumb wheel to scroll through the menu and select Standby.
3. Press the thumb wheel.
The display goes in standby.
Solaris LC40
Select input
Image settings
Audio settings
PiP settings
Compact PC Control
Advanced settings
Standby
Back
Menu 5-1
Power off
1. The display is showing an image. Switch off with the main switch.
The last used source will be stored to start up on that source when switching on.
2. Go first to standby and then switch off with the main switch.
The Solaris LC40 will always start up in standby.

5.3 Using the RCU

Pointing to the IR sensor.
1. When using the wireless remote control, make sure you are within the effective operating distance (30m, 100ft in a straight line).
The remote control unit will not function properly if strong light strikes the sensor window or if there are obstacles between the
remote control unit and the Solaris LC40 IR sensor. (image 5-2)
45° 45°
Image 5-2
IR angle
R5976672 SOLARIS LC40 01042004
45 45
°
°
5. Getting Started
31